Thanks Uwe for clearing out doubts. Appreciate it.
Regards,
Sachin
-Original Message-
From: Uwe Schuerkamp [mailto:uwe.schuerk...@nionex.net]
Sent: Freitag, 16. März 2012 11:08
To: Holikar, Sachin (ext)
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] bacula Offsite
you.
Regards,
Sachin
-Original Message-
From: Alan Brown [mailto:a...@mssl.ucl.ac.uk]
Sent: Freitag, 9. März 2012 15:40
To: Holikar, Sachin (ext)
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] bacula Offsite Backups
On 09/03/12 07:48, Holikar, Sachin (ext) wrote:
>
On Fri, Mar 09, 2012 at 03:49:40PM +0100, Holikar, Sachin (ext) wrote:
>
> Thanks Uwe for the reply.
>
> I request some explanation here.
> You suggested :
>
> 1.Create a separate offsite pool and then after use, remove them as
> necessary from the autochanger and set their volume status t
On Fri, 9 Mar 2012 10:07:22 -0300 Kleber Leal wrote:
>
>> Create a off-site pool and create a copy job.
>> The bacula will need off-site tapes only when the backups was
>> pruned/purged from local tapes.
I seem to remember that tape to tape copy jobs require two tape drives.
---
On Fri, 9 Mar 2012 10:07:22 -0300
Kleber Leal wrote:
> Create a off-site pool and create a copy job.
> The bacula will need off-site tapes only when the backups was
> pruned/purged from local tapes.
>
> Kleber
>
> 2012/3/9 Uwe Schuerkamp
>
> > On Fri, Mar 09, 2012 at 08:48:40AM +0100, Holikar
On 09/03/12 07:48, Holikar, Sachin (ext) wrote:
>
> 1. Can we just take out the filled/half-filled tapes out of the tape library
> just like that to be kept at offsite? Or some necessary procedure is
> required for this?
update volume={volumename} VolStatus=Used (or Archive)
> 2. Once we tak
schuerk...@nionex.net]
> Sent: Freitag, 9. März 2012 13:48
> To: Holikar, Sachin (ext)
> Cc: bacula-users@lists.sourceforge.net
> Subject: Re: [Bacula-users] bacula Offsite Backups
>
> On Fri, Mar 09, 2012 at 08:48:40AM +0100, Holikar, Sachin (ext) wrote:
> > Hello Admis,
> >
Sachin (ext)
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] bacula Offsite Backups
On Fri, Mar 09, 2012 at 08:48:40AM +0100, Holikar, Sachin (ext) wrote:
> Hello Admis,
>
> We have a working Bacula ( Release 2.2.7) setup.
> So far all the backup tapes are retained i
Create a off-site pool and create a copy job.
The bacula will need off-site tapes only when the backups was pruned/purged
from local tapes.
Kleber
2012/3/9 Uwe Schuerkamp
> On Fri, Mar 09, 2012 at 08:48:40AM +0100, Holikar, Sachin (ext) wrote:
> > Hello Admis,
> >
> > We have a working Bacula (
On Fri, Mar 09, 2012 at 08:48:40AM +0100, Holikar, Sachin (ext) wrote:
> Hello Admis,
>
> We have a working Bacula ( Release 2.2.7) setup.
> So far all the backup tapes are retained inside the tape library. But now we
> have decided to keep 1 set offsite.
> We have created a separate pool of tape
Hello Admis,
We have a working Bacula ( Release 2.2.7) setup.
So far all the backup tapes are retained inside the tape library. But now we
have decided to keep 1 set offsite.
We have created a separate pool of tapes ( say 10 tapes) and taken few
important backups last week. Now couple of tapes a
For the last few days, I've been struggling with the same problem, and I
don't if my experience can help you or not, but here goes:
First of all, I have a special Admin Job that runs every day at 12:00pm,
which basically sends my Catalog Backup (postgres), the bacula-dir and
bacula-sd config and s
I have successfully been using Bacula for almost 2 years now. Fairly
small (~30 machines) and straight forward setup -- only one director,
one SD.
A need has arisen to start doing offsite backups. Now, what seems
like pretty trivial task, came out to be major headache.
I went through mailing li
13 matches
Mail list logo
