-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Francisco,
Please do not reply to another topic and change the subject line. This
is known as thread hijacking,
http://en.wikipedia.org/wiki/Thread_hijacking and is very annoying in a
threaded mail reader. I delete thread hijacks without reading th
Con fecha 26/2/2008, "John Drescher" <[EMAIL PROTECTED]> escribió:
>> This should be a working or something?
>>
>Now you confused me. I am not sure exactly what you are asking.
>
>If you restarted the bacula-sd daemon it should now work.
>
>At that point it would be good to would try a job that sp
> This should be a working or something?
>
Now you confused me. I am not sure exactly what you are asking.
If you restarted the bacula-sd daemon it should now work.
At that point it would be good to would try a job that spans tapes to
see if it is working correct.
John
-
>
>Delete the lines Autochanger=yes and Drive Index = 0 from your config
>file. These are for autochangers/libraries only. Then restart
>bacula-sd .
>
>
>John
Ready .. I have already commented on the two lines that you mentioned and
me has reset the bacula-sd ... This should be a working or som
On Tue, Feb 26, 2008 at 12:55 PM, Francisco Munoz Perez
<[EMAIL PROTECTED]> wrote:
> Con fecha 26/2/2008, "John Drescher" <[EMAIL PROTECTED]> escribió:
>
>
>
> >> Load the tape in the slot in the powervault (this does not have
> >> autocharger).
> >>
> >> So I did not make tests autocharger a
Con fecha 26/2/2008, "John Drescher" <[EMAIL PROTECTED]> escribió:
>> Load the tape in the slot in the powervault (this does not have
>> autocharger).
>>
>> So I did not make tests autocharger as it has no autocharger.
>>
>> You understand me?
>>
>Yes, I do. Your english is fine. The error me
> Load the tape in the slot in the powervault (this does not have
> autocharger).
>
> So I did not make tests autocharger as it has no autocharger.
>
> You understand me?
>
Yes, I do. Your english is fine. The error message I saw it looked
like you had an autochanger. Can you post your bacula-
Con fecha 26/2/2008, "John Drescher" <[EMAIL PROTECTED]> escribió:
>> No, to load the first tape I do it manually (insert the tape in the
>> powervault, run the bconsole and execute mount to load)
>>
>Do you mean you loaded the tape to the tape drive of the powervault or
>to a slot on the autoch
> No, to load the first tape I do it manually (insert the tape in the
> powervault, run the bconsole and execute mount to load)
>
Do you mean you loaded the tape to the tape drive of the powervault or
to a slot on the autochanger and bacula then had the changer grab put
the tape in the drive usin
Con fecha 26/2/2008, "John Drescher" <[EMAIL PROTECTED]> escribió:
>On Tue, Feb 26, 2008 at 12:17 PM, Francisco Munoz Perez
><[EMAIL PROTECTED]> wrote:
>> There is the error:
>>
>>
>>
>> 26-feb 05:39 bacula-sd: Please mount Volume "ExternoFull2" o
On Tue, Feb 26, 2008 at 12:17 PM, Francisco Munoz Perez
<[EMAIL PROTECTED]> wrote:
> There is the error:
>
>
>
> 26-feb 05:39 bacula-sd: Please mount Volume "ExternoFull2" on Storage
> Device "LTO2-0" (/dev/nst0) for Job Correo_Externo.2008-02-25_
There is the error:
26-feb 05:39 bacula-sd: Please mount Volume "ExternoFull2" on Storage
Device "LTO2-0" (/dev/nst0) for Job Correo_Externo.2008-02-25_09.24.45
25-feb 09:24 backup: Start Backup JobId 255,
Job=Correo_Externo.2008-02-25_09.24.45
25
> My problem is as follows:
>
> I mounted bacula (sd, dir, bconsole, mysql) in a server with centos 5 and
> a unit powervault 114t with tapes LTO-2 (200 G/400 G). The backups have
> so far been normally, but some time back I think support is a server
> with 560 G of using in hard disk and fill
Hi, I am new to the list. I'ma chile and my English is not very good. I
hope you can understand me!
My problem is as follows:
I mounted bacula (sd, dir, bconsole, mysql) in a server with centos 5 and
a unit powervault 114t with tapes LTO-2 (200 G/400 G). The backups have
so far been normally, bu
14 matches
Mail list logo
