Hi,
22.04.2009 22:47, Benjamin Minshall wrote:
> Arno Lehmann wrote:
>> Alternatively, you could also create a "fake" autochanger (beware -
>> work included:-) with three slots, where each slot actually represents
>> a drive. Basically, you'd create a symlink pointing to the drive you
>> actual
Arno Lehmann wrote:
> Alternatively, you could also create a "fake" autochanger (beware -
> work included:-) with three slots, where each slot actually represents
> a drive. Basically, you'd create a symlink pointing to the drive you
> actually want to use, and manage that link with the changer
Hi,
22.04.2009 18:23, John Drescher wrote:
> On Wed, Apr 22, 2009 at 12:00 PM, Benjamin Minshall
> wrote:
>> Hello,
>>
>> I would like to know if there is a way to make bacula 2.4.4 backup a single
>> job to multiple tape drives?
>
> No. Bacula will only use 1 storage device per job for the ent
On Wed, Apr 22, 2009 at 12:00 PM, Benjamin Minshall
wrote:
> Hello,
>
> I would like to know if there is a way to make bacula 2.4.4 backup a single
> job to multiple tape drives?
No. Bacula will only use 1 storage device per job for the entire
execution of the job.
Split the job in smaller part
Hello,
I would like to know if there is a way to make bacula 2.4.4 backup a single job
to multiple tape drives? I have a machine with three DDS drives and the
monthly full backup is large enough to require at least two, sometimes three
tapes. I would like to load a freshly labeled tape into e
