[Bacula-users] LTO 8 Slow write speeds

2025-04-11 Thread Udo Kaune
Am 11.04.25 um 15:54 schrieb Gilles Van Vlasselaer: I can't seem to get Maximum block size = 1024K to work, I can't label the tapes either with btape or bconsole; When I revert it to 512K, the labeling works as expected, maybe the drive isn't capable of managing 1M block sizes? Whilst being i

Re: [Bacula-users] LTO 8 Slow write speeds

2025-04-11 Thread Gilles Van Vlasselaer
Hi Udo, That's good news. Please leave out the "Minimum Block Size". "Maximum Block Size" defines also the default that will be used. ITDT made up the 29G, you don't need to adhere to them. Even though 1024K Transfer Size is not listed in the ITDT table you should give it a try. I can't seem t

[Bacula-users] LTO 8 Slow write speeds

2025-04-10 Thread Udo Kaune
Am 10.04.25 um 13:33 schrieb Gilles Van Vlasselaer: Hi Udo, Thanks for your input, with the itdt command I got the following; Compres- Transfer Data Size Elapsed Data Rate able Size (KB) (MB)Time (s) (MB/s) +--+-+-++--+ | No | 512 | 2999

Re: [Bacula-users] LTO 8 Slow write speeds

2025-04-10 Thread Gilles Van Vlasselaer
Hi Udo, Thanks for your input, with the itdt command I got the following; Compres- Transfer Data Size Elapsed Data Rate able Size (KB) (MB)Time (s) (MB/s) +--+-+-++--+ | No | 512 | 2 | 104.766| 286.342 | | No | 256 | 2

Re: [Bacula-users] LTO 8 Slow write speeds

2025-04-08 Thread Udo Kaune
Am 08.04.25 um 16:17 schrieb Gilles Van Vlasselaer: Hi Udo, Your Maximum File Size ist too small. If you assume 300MB/sec the tape would stop every 5000/300 seconds to write an EOF mark. That cannot be fast. Please try at least the amount of data for writing 3 minutes sustained (Maximum File

Re: [Bacula-users] LTO 8 Slow write speeds

2025-04-08 Thread Gilles Van Vlasselaer
Hi Udo, Your Maximum File Size ist too small. If you assume 300MB/sec the tape would stop every 5000/300 seconds to write an EOF mark. That cannot be fast. Please try at least the amount of data for writing 3 minutes sustained (Maximum File Size = 54GB). I'll try this once the current copy job

Re: [Bacula-users] LTO 8 Slow write speeds

2025-04-08 Thread Udo Kaune
Am 08.04.25 um 14:18 schrieb Gilles Van Vlasselaer: Hi all, I'm having issues with write speeds to our LTO drive. Copy jobs aren't going over 100 MB/sec, and on average it's around 80 MB/sec. Using btape speed I was benchmarking the performance on different tapes (HW compression on/off, HW en

[Bacula-users] LTO 8 Slow write speeds

2025-04-08 Thread Gilles Van Vlasselaer
Hi all, I'm having issues with write speeds to our LTO drive. Copy jobs aren't going over 100 MB/sec, and on average it's around 80 MB/sec. Using btape speed I was benchmarking the performance on different tapes (HW compression on/off, HW encryption on/off), and it reached 180-220 MB/sec, depe