Hi Jim,
Sry didn't post a reply earlier but was not able to till now.
The problem is solved i got a direct reply.
this did the trick
===
The short answer to the problem is that with the default Makefile for the
src/cats diretory, the build cannot find the libmysqlclient_r on Ubuntu 12.04.
I
That is good now test the bacula
mtx-changer
Pf thx guys thru testing with mtx-changer i solved my problem
[Rolling Eyes] finaly i ended up switching the cabels at the back off the
backup unit.
needed to make from sg5 sg4 and it worked. Stupid me.
Thx for the help.
Marcel
+-
That is good now test the bacula
mtx-changer
Pf thx guys thru testing with mtx-changer i solved my problem
[Rolling Eyes] finaly i ended up switching the cabels at the back off the
backup unit.
needed to make from sg5 sg4 and it worked. Stupid me.
Thx for the help.
Marcel
+-
hi Pietro,
3304 Issuing autochanger "load slot 5, drive 0" command.
3992 Bad autochanger "load slot 5, drive 0": ERR=Child died from signal 15:
Termination.
Results=Program killed by Bacula (timeout)
have you tried to run /etc/bacula/mtx-changer with load command manually ?
Yes i did i trie
Hi all,
I have a strange problem when i try to mount a tape.
First what i have i use centos 5.4 with bacula 5.0.3
Hardware is an IBM TS3100 (3573-TL) with 2 LTO5 (ULT3580-HH5)
config from bacula-sd.conf
Autochanger {
Name = Autochanger
Device = LTO5_1, LTO5_2
Changer Device = /dev/sg5
Changer Com
Hi Daniel,
Thx for the tip "mtx inquiry" gives me the folowing.
Product Type: Medium Changer
Vendor ID: 'IBM '
Product ID: '3573-TL '
Revision: 'A.40'
Attached Changer: No
and i can use it with /dev/st0 and /dev/st1
Regards Marcel
+---
@patric
i know the topic is old.
but we have purchased a ts3100 with 2 lto5 drives.
I use Centos 5.6 and have a hard time installing the Lin_tape drivers did you
used them?
+--
|This was sent by marcel.van.gereste...@steltix.com
