Re: [Bacula-users] Again: Device is BLOCKED waiting to create a volume for:

Hi Ana, > Sorry for my late reply. > no problem at all, that gave me time for some more tests. > From your first post, the problem was not about bacula needing to create > another volume, but that you had only one drive and your jobs were asking for > volumes in two different pools. > This is

Re: [Bacula-users] Again: Device is BLOCKED waiting to create a volume for:

Hi Ana, > Both of your jobs (BackupCatalog and Backup job AB01) are trying to use > device > FileStorage. Is this your only device? If so, you can have concurrent jobs > writing in the same mounted volume in this device. You cannot have more than > one volume mounted in one specific drive. Als

[Bacula-users] Again: Device is BLOCKED waiting to create a volume for:

Hi, we are using bacula 5.2.6 on a Ubuntu 14.04 LTS. We have two pools for backups set up like this: Pool { Name = File Pool Type = Backup Recycle = yes AutoPrune = yes Volume Retention = 365 days Maximum Volume Bytes = 50G Maximum Volumes = 10 } Pool { Name = AB01 Pool Type

[Bacula-users] Question about the database structure of Bacula

Hello, the table "Status" contains the long and the short form of the job status messages. When I have a look at the table JobHisto, it has a field named JobStatus, but most of the values are "54". How do get the "real" job status message out of the table JobHisto? Thanks, Stefan --

[Bacula-users] How do I remove clients from the database?

Hello, I have removed a number of clients from bacula-dir.conf and restarted the director. In the bconsole "list clients" still lists the removed clients. The delete command only allows me to remove volumes, pools and jobids. So, how do I remove/delete clients? Thanks for any hints/suggestion

Re: [Bacula-users] SD Problem

-Ursprüngliche Nachricht- An: Stefan Michael Guenther ; Von:Ignacio Cardona Gesendet: Do 01.09.2011 20:30 Betreff:Re: [Bacula-users] SD Problem > This is what I have on my bacula-sd.conf . That's why I don´t understand the  > where is the problem.

Re: [Bacula-users] SD Problem

> Storage daemon didn't accept Device "FileStorage" because: > 3924 Device "FileStorage" not in SD Device resources. > does your /etc/bacula-sd.conf has something like this in it: Device { Name = FileStorage Media Type = File Archive Device = /some-dir LabelMedia = yes;

Re: [Bacula-users] Who is right about the tape size: Bacula or the tapeloader??

Hi Alan, THANKS for the long list of suggestions! It will check this during the next days and hopefully send positive results to the list. Stefan -Ursprüngliche Nachricht- An: Stefan Michael Guenther ; CC: John Drescher ; bacula-users@lists.sourceforge.net; Von:Alan

Re: [Bacula-users] Who is right about the tape size: Bacula or the tapeloader??

Hi, > you do not impose a limit on how many bytes that bacula can write to a > tape bacula will write as many bytes as it can up until it hits the > first tape write error. At this point bacula assumes the tape is full. > Check your dmesg to see if there are any problems. Also try a brand > new LT

[Bacula-users] Who is right about the tape size: Bacula or the tapeloader??

Hi, we are using a Tandberg autchanger with eight LTO3 tapes, which could save 400/800 GB of data. Herre is the definition of the device in bacula-sd.conf: Device { Name = Drive-1 Media Type = Ultrium-LTO3 Archive Device = /dev/st0 AutomaticMount = yes; AlwaysOpen = ye

[Bacula-users] How do I force Bacula to unlock a drive?

Hi, we still have a problem with our tapeloader. The status of the storage tells me: Jobs waiting to reserve a drive: 3608 JobId=1097 wants Pool="Mittwoch" but have Pool="Dienstag" nreserve=1 on drive "Drive-1" (/dev/st0). 3606 JobId=1097 prefers mounted drives, but drive "Drive-1" (/d

Re: [Bacula-users] .. waiting on StorageAutochanger ??

Hi, > Look at the status storage > Jobs waiting to reserve a drive: 3608 JobId=1097 wants Pool="Mittwoch" but have Pool="Dienstag" nreserve=1 on drive "Drive-1" (/dev/st0). 3606 JobId=1097 prefers mounted drives, but drive "Drive-1" (/dev/st0) has no Volume. 3608 JobId=1115 wants P

[Bacula-users] .. waiting on StorageAutochanger ??

Hi, after solving the used/append problem, we are facing the next problem: Running Jobs: Console connected at 18-Aug-11 09:54 JobId Level Name Status == 1115 Increme Frodo.2011-08-18_13.05.49_23 is wai

Re: [Bacula-users] Bacula changes volume status from append to used. Why?

Hi, > > Pool { > > Name = Dienstag > > Pool Type = Backup > > Recycle = yes > > AutoPrune = yes > > Volume Retention = 8 days > > Maximum Volume Bytes = 800G > > Maximum Volumes = 2 > > Maximum Volume Jobs = 18 > > UseVolumeOnce = yes > > RecyclePool = Dienstag > > } > > I gues

Re: [Bacula-users] FD can't communicate With SD !?

> [...] > > I've open ports on Windows and my router. > [...] > > *When i run a job, i got this message :* > > *17-août 11:40 bomel-pc-fd JobId 131: Warning: > > /home/kern/bacula/k/bacula/src/lib/bsock.c:128 Could not connect to > > Storage daemon on 192.168.50.21:9103. ERR=Lopération a réussi.*

[Bacula-users] Bacula changes volume status from append to used. Why?

Hello, we like to backup 18 different hosts on one tape. After the last job has finished, Bacula should close the tape. The problem is that Bacula closes the volume already after the first (!) job, so that the next job waits for an appendable volume. We changed the status of the volume from "u

[Bacula-users] Bacula ignores "Maximum Block Size" and "Maximum Network Buffer Size"

Hello, we are using a Tandberg Autochanger with LTO3 tapes (400/800GB). After Bacula reported the VolStatus "Full" after just saving about 260 GB, we checked the output of demsg an found the following: [ 7.806343] st 3:0:1:0: Attached scsi tape st0 [ 7.806345] st 3:0:1:0: st0: try direct i/o: ye