Hi @ll,
i installed bacula server on debian squeeze 64 bit system. i used bacula
from debian repository with bacula version 5.0.2.
can i use bacula windows client version 5.2.10 on windows clients to
work with the debian bacula version 5.0.2? Or do i have to use the same
bacula windows client ver
Hi Bruno,
> just a note, if you want to use the eject command, be sure to fully sync the
> filesystem
> as it can take a long time before the last write occur. We've seen during
> test a number of time
> the media being eject physically before the last sync occur, leading to
> trouble afterwar
Hi @all,
i want to use bacula on Debian Squeeze Server with a tandberg rdx tape
to backup my data.
Can anyone post me a example configuration for a rdx tape under bacula?
Or can help me to configure bacula that i can use the rdx tape for backups?
Thanks.
Best regards
Stefan
---
Hi Arno
>>
>> i have to backup a nas system with a total size of 6,5TB. At this
>> time the nas system only has ~2TB of data that have to backup but
>> in future, the next two years data will be increase up to 6TB.
>>
>> I have installed Debian Etch on the nas system with samba und
>> bacula as b
Hi Bob
> As another pointed out... you'll want to get a higher capacity library
> in place before you hit 6TB of data of course. Depending on the nature
> of what's on that NAS you may find that you have too much data long
> before you hit 6TB too (i.e. if the data is already compressed a lot
>
Hi,
i have to backup a nas system with a total size of 6,5TB. At this time the nas
system only has ~2TB of data that have to backup but in future, the next two
years data will be increase up to 6TB.
I have installed Debian Etch on the nas system with samba und bacula as backup
application. I u
Hi Dan,
>
> To relabel an already labelled tape, you can use the relabel command.
> But I think that is not what you want. You want to erase what is on
> the tape, and start again.
>
> You can "erase" the tape by doing this:
>
> mt -f /dev/YOURTAPEDEVICE rewind
> mt -f /dev/YOURTAPEDEVICE w
Hi Dan.
I made the mistake to label manually each tape in the autochanger by the
command label media...
Now, I know that i better used the console command label barcodes. But now
after I labeled the tapes manually I get the error messages "3920 Cannot label
Volume because it is already labeled
Hi,
I read the bacula manual especially the article
http://www.bacula.org/rel-manual/Autochanger_Support.html,
http://www.bacula.org/dev-manual/Brief_Tutorial.html#SECTION001216
and
http://www.bacula.org/dev-manual/Automatic_Volume_Recycling.html
but I can not reset the labels
Hi Chris,
could it be that your script eject the tape after run it?
If I do a mtx -f /dev/sg3 status now the following output appears:
mtx -f /dev/sg3 status
Storage Changer /dev/sg3:1 Drives, 8 Slots ( 0 Import/Export )
Data Transfer Element 0:Full (Unknown Storage Element Loaded)
Stor
Hi folks,
can anyone tell me how to delete the label of ait4 tape at my autochanger?
I made the mistake to label each tape in the autochanger by the command label
media...
Now, I know that i better used the console command label barcodes. But now
after I labeled the tapes manually I get the err
Please excuse me, i forgotten to copy the error... :-)
>
>> i try to configure bacula to backup data to a Sony StorStation LIB-81
>> autochanger (200GB/520GB AIT4). The System I use is Debian GNU/Linux 4.0
>> "Etch".
>>
>> If I run btape -c /etc/bacula/bacula-sd.conf -f /dev/sg3 the following e
12 matches
Mail list logo
