On 2014-11-19 12:46, Ana Emília M. Arruda wrote:
> Hi Mike,
>
> On Tue, Nov 18, 2014 at 5:53 PM, Brady, Mike
> wrote:
>
>> On 2014-11-19 08:52, Ana Emília M. Arruda wrote:
> Do you have "prefer mounted volumes" set to no in your jobs
> definition? It is recommended if you are using multi
Hi Mike,
On Tue, Nov 18, 2014 at 5:53 PM, Brady, Mike
wrote:
> On 2014-11-19 08:52, Ana Emília M. Arruda wrote:
> >>> Do you have "prefer mounted volumes" set to no in your jobs
> >>> definition? It is recommended if you are using multiple devices
> >>> and
> >>> one pool.
> >>
> >> I do not hav
On 11/18/2014 07:50 AM, Dante Colo wrote:
> Hello Heitor
>
> I tried but wasn't the case, anyway thank you for the suggestion.
re: Adding Ignore Fileset Changes = Yes option in fileset.
If you add that to a fileset, it will take affect after the first full of that
newly modified fileset is co
Hi Martin
Here it is my job confs and the db query output below, it seems that there are
duplicated filesets , even on that ones with the same name
(tscobra_database_fileset,tscobra_fileset) , is it possible reuse the older
filesets ?
JobDefs {
Name = "defaultjob"
Enabled = yes
SpoolDa
On 2014-11-19 08:52, Ana Emília M. Arruda wrote:
>>> Do you have "prefer mounted volumes" set to no in your jobs
>>> definition? It is recommended if you are using multiple devices
>>> and
>>> one pool.
>>
>> I do not have this set because of the warnings against it in both
>> the manual and one o
On Tue, Nov 18, 2014 at 4:47 PM, Brady, Mike
wrote:
> On 2014-11-16 05:36, Ana Emília M. Arruda wrote:
>
>> Hi Mike,
>>
>> Despite that the white paper tell us about having "Maximum Concurrent
>> Jobs = 1" in device configuration. I think this could make sense when
>> using stand alone devices in
Both the Bacula main manual and the "Beast Practices for Disk Based
Backups" white paper mention a script manual_prune.pl, but I can not
find this script anywhere.
Can some one provide me to a link for it.
Thanks
Mike
--
On 2014-11-16 05:36, Ana Emília M. Arruda wrote:
> Hi Mike,
>
> Despite that the white paper tell us about having "Maximum Concurrent
> Jobs = 1" in device configuration. I think this could make sense when
> using stand alone devices in a group as you have in the white papers.
> When using autocha
I suggest you post the Job/JobDefs definitions from bacula-dir.conf and the
output of these sql commands:
select * from fileset;
select clientid, name from client;
select poolid, name from pool;
select name, type, level, clientid, poolid, filesetid, starttime from job order
by starttime;
__Marti
On 2014-11-16 02:12, Josh Fisher wrote:
> On 11/14/2014 6:17 PM, Brady, Mike wrote:
>> First of all thanks to Kern and Bacula Systems for making the "Best
>> Practices for Disk Based Backup" and "Disk Back Design" documents
>> available.
>>
>> I have been playing around with the best way for doing
Also, I think those Label Format clauses are strange when used with Recycle =
yes. The volumes will be labelled forever with the creation date
(e.g. monday-2014-11-17), not the recycling date.
__Martin
> On Tue, 18 Nov 2014 13:51:57 -0300, Ana Emília M. Arruda said:
>
> Yes, you are correc
Yes, you are correct. That was exactly what ocurred. If you want a 13 days
retention period for your incremental jobs, you will have to configure
a Maximum
Volumes of 2. Also, you have different retention periods for incremental
and full backups (me too). So I would recommend you to have different
Yes, the actual value is 13, and it caused the problem.
In my opinion, the first week , bacula created successfully the monday
incremental backup, and its status was "USED" but it had to be wait 13 days.
During that time, in the second week, bacula tried to write again to the
same volume that is
Hi Sieu,
If you have changed the "volume retention" for your volumes in the pool
configuration, this change only is applied to new volumes created. For the
volumes that were already in the catalog, you should run an "update volume"
through bconsole and change this value there too.
Since you said
Hello!
If you want to run concurrent jobs, you should define the same priority for
all of them. From the manual: "Bacula concurrently runs jobs of only one
priority at a time. It will not simultaneously run a priority 1 and a
priority 2 job."
Best regards,
Ana
On Tue, Nov 18, 2014 at 6:39 AM, Sü
sorry for my mistake, in the pools.conf, the value of parameter "Volume
Retention" is all 13 days, not 6 days as above.
Truc
On Tue, Nov 18, 2014 at 4:34 PM, Sieu Truc wrote:
> Hello,
>
> I have a schedules.conf like
>
> #
> # Planification des sauvegardes nfs.
> #
> Schedule {
> Name = "schedu
Hello,
I have a schedules.conf like
#
# Planification des sauvegardes nfs.
#
Schedule {
Name = "schedule_intra1"
Run = Level=Incremental Pool=lundi Monday at 22:00
Run = Level=Incremental Pool=mardi Tuesday at 22:00
Run = Level=Incremental Pool=mercredi Wednesday at 22:00
Run = Level=Incremental
Hello Heitor
I tried but wasn't the case, anyway thank you for the suggestion.
- Original Message -
From: hei...@bacula.com.br
To: "Dante Colo"
Cc: bacula-users@lists.sourceforge.net
Sent: Tuesday, November 18, 2014 10:37:53 AM
Subject: Re: [Bacula-users] Incremental Jobs
I
I migrated a Bacula Director to another machine because of a hard drive issue
where i lost the conf files , now It's installed on the machine where Bacula
Storage (version 5.2.13 for Director ,Storage and File) is running , the
database is the same, i created the same filesets and jobs with same
Hello,
On 18 November 2014 13:06, Uwe Schuerkamp wrote:
> is it possible to run the bacula-fd as a non-root user (knowing full
> well that certain parts of the system can't be backed up properly
> then)?
>
if you use the command line switch "-k" it will drop all privileges except
ReadAll.
Don'
Hello everyone
I migrated a Bacula Director to another machine because of a hard drive issue
where i lost the conf files , now It's installed on the machine where Bacula
Storage (version 5.2.13 for Director ,Storage and File) is running , the
database is the same, i created the same filesets
"is it possible to run the bacula-fd as a non-root user (knowing full
well that certain parts of the system can't be backed up properly
then)?"
Hello Uwe: maybe you can use a sudo -u user_name on the init.d scripts that
starts the daemon (need testing):
start-stop-daemon --start --quiet --pidfil
Hi folks,
is it possible to run the bacula-fd as a non-root user (knowing full
well that certain parts of the system can't be backed up properly
then)?
All the best, Uwe
--
NIONEX --- Ein Unternehmen der Bertelsmann SE & Co. KGaA
--
I am trying to make bacula use multi drives in a Fujitsu Tape Library with no
success. Recently I added 3 more drives to bacula configuration to reduce
backup time. But bacula insists on using only the first drive. Backup jobs are
not sent to other suitable tape drives. Jobs are started at the s
Hi,
I am trying to make bacula use multi drives in a Fujitsu Tape Library
with no success. Recently I added 3 more drives to bacula configuration
to reduce backup time. But bacula insists on using only the first drive.
Backup jobs are not sent to other suitable tape drives. Jobs are started
at the
25 matches
Mail list logo
