Op 11/02/2011 23:39, Jeremiah D. Jester schreef:
I'm trying to determine that status of some of my tapes and I'm a
little confused on the output. Anyone have any insight?
Thanks,JJ
[root@scrappy bacula]# ./bin/btape -c bacula-sd.conf /dev/nst0
Tape block granularity is 1024 bytes.
btape: b
Op 14/02/2011 20:11, Mike Hendrie schreef:
*Issue: bconsole not launching*
*
*
*Why: *I was making changes to several bacula config files
(bacula-dir.conf, bacula-sd.conf, bacula-fd.conf) and now the bconsole
is not starting.
*Changes made:*
Passwords
...
You say you changed so
Am Mon, 14 Feb 2011 17:36:13 +0100 schrieb Simone Martina:
> Hi at all,
> since some weeks I got a new SCSI controller due to use a second tape
> reader into the HP MSL6030 (a Overland NEO 2000 clone) tape library.
> After some initially troubles and a some telephonic shout with HP
> support, now
On 2/14/2011 4:52 PM, Bob Hetzel wrote:
>
> In summary, Dir and FD need to be at the same version, FD version should be
> really close if you want to be sure you can use newer features, bug fixes,
> etc.
Did you mean Dir and SD? Dir and SD must be a the same level. FD can
lag behind. In short
On 02/14/11 16:56, Mezgani Ali via LinkedIn wrote:
>
> LinkedIn
>
> Mezgani Ali requested to add you as a connection on LinkedIn:
This ... person ... is just spamming anything and everything.
--
Phil Stracchino, CDK#2 DoD#299792458 ICBM: 43.5607, -71.355
ala...@caerllewys.net
LinkedIn
Mezgani Ali requested to add you as a connection on LinkedIn:
--
Kevin,
I'd like to add you to my professional network on LinkedIn.
- Mezgani
Accept invitation from Mezgani Ali
http://www.linkedin.com/e/-63itvh-gk5xcc49-h/poU5GnxHJsFS
Jeff Shanholtz schrieb:
>> > ...
>> > Finally, I assume that if I stay with 3.0.1 on the server, I can upgrade
>> > clients to 5.0.3, correct? I'm crossing my fingers that the client "status"
>> > window will be a little more informative than just a big blank window like
>> > it is in 3.0.1. :)
I was able to get the client to work on Win7. Thank you for your input. The
issue I found was with the 64bit install. I was doing to entire install
thinking only the console would not work, however, the client did not work
as well.
When I did the advanced bacula client install only, and configure
On 2/12/2011 7:59 PM, Mike Hendrie wrote:
> Alright.
> I created a new Windows 7 VM, installed the bacula client 64bit, added
> the client to the bacula-dir.conf file and*was able to telnet to port
> 9102*. However, when I check the status of the machine in the
> bconsole, it fails.
On the Win
On 2/14/11 11:11 AM, Mike Hendrie wrote:
*Why: *I was making changes to several bacula config files
(bacula-dir.conf, bacula-sd.conf, bacula-fd.conf) and now the bconsole
is not starting.
Mike bconsole should talk to the director, look at bacula-dir.conf
Mehma
*Server Environment: *Ubuntu 10.10
*Issue: bconsole not launching*
*
*
*Why: *I was making changes to several bacula config files (bacula-dir.conf,
bacula-sd.conf, bacula-fd.conf) and now the bconsole is not starting.
*Changes made:*
Passwords
File Storage Path
Windows Client
*
*
*Question:* Can
"Chris Geegan" kirjoitti viestissä
news:AANLkTinSh9xDwzVNBYmEgpJKX2W58LApkS1NrR==a...@mail.gmail.com...
I have installed Bacula on a Linux server. I have successfully configured
this server to be backed up by Bacula and the job runs properly.
I have configured a second Linux client as well
On 2/14/11 8:59 AM, Chris Geegan wrote:
However, when I execute the job I see 1,Full not found executing Full
backup, Using "Storage Device". Then nothing. There are no errors in
the syslog or messages log of either system. If the check client
status or estimate failed then I would understand
Hi at all,
since some weeks I got a new SCSI controller due to use a second tape
reader into the HP MSL6030 (a Overland NEO 2000 clone) tape library.
After some initially troubles and a some telephonic shout with HP
support, now I'm able to use both internal reader (nst0 and nst1) and to
control th
I have installed Bacula on a Linux server. I have successfully configured
this server to be backed up by Bacula and the job runs properly.
I have configured a second Linux client as well using a modified copy of the
bacula-fd.conf from the first client/server. I have added the client
successfully
For some reason Verify VolumeToCatalog is not working as expected. I
tried to verify a 1.86TB job to verify that the data on the 6 LTO2
tapes is correct with fileset ImageData-ds3-fs but it appears that
bacula is mixed up trying to verify the catalog backup job instead.
Here is the log:
14-Feb 10:
On 14/02/2011 10:51 AM, Guy wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> did you compile bacula with the postgres option selected? That will drop the
> scripts in /etc/bacula/
>
> - --Guy
>
> On 14 Feb 2011, at 14:44, Sean Smith wrote:
>
>> I have recently installed Bacula with Po
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
did you compile bacula with the postgres option selected? That will drop the
scripts in /etc/bacula/
- --Guy
On 14 Feb 2011, at 14:44, Sean Smith wrote:
> I have recently installed Bacula with Postgres onto a new fedora
> install. I do not see th
http://wiki.bacula.org/doku.php?id=howto_install_and_configure_bacula_on_fedora_9_using_yum
This indicates that the scripts are located here: /usr/libexec/bacula/
Dan Schaefer
Web Developer/Systems Analyst
Performance Administration Corp.
On 2-14-2011 9:44 AM, Sean Smith wrote:
> I have recentl
I have recently installed Bacula with Postgres onto a new fedora
install. I do not see the client scripts for creating the database part
fo the bacula setup? What am I missing here?
Thanks
S Smith
--
The ultimate all-i
Op 20101204 om 14:12 schreef Dan Langille:
> On 12/3/2010 4:13 PM, Henrik Johansen wrote:
>
> >> Part II is online now.
>
> http://blog.myunix.dk/2010/12/02/large-scale-disk-to-disk-backups-using-bacula-part-ii/
>
> > Part III is now also online.
>
> http://blog.myunix.dk/2010/12/03/large-scale
21 matches
Mail list logo
