Using 3.0.2 on Ubuntu 8.04 server with MySQL.
It is now Friday of the 2nd week of January so the schedule A with Pool
A should be used, I would have thought. However, this morning at 9:05 I
get a message asking for a volume of drive B to be labelled. From Monday
to Thursday the A schedule was u
Steve Costaras schrieb:
>
>
> Some history:
>
> On 01/14/2010 16:24, Dan Langille wrote:
> > Steve Costaras wrote:
> >> On 01/14/2010 15:59, Dan Langille wrote:
> >>> Steve Costaras wrote:
> I see the mtimeonly flag in the fileset options but there are many
> caveats about using it as
John Jorgensen wrote:
>> "alaric" == Phil Stracchino writes:
>
> alaric> Actually, I have a suspicion I may know what's going
> alaric> on here, with more thought. Is it perhaps the case
> alaric> that 'modify Pool' in the console on a manually
> alaric> started job overrides
Jon Schewe wrote:
> On 1/12/10 5:40 PM, Timo Neuvonen wrote:
>>> So I'm backing data up to an external drive. I have maximum volume jobs
>>> set to 1, to ensure that each job uses a different volume. I would also
>>> like it such that volumes are not reused, so I assume I should set
>>> recycle to
Hello friends,
I've installed bacula in my server. I wanna make a backup server with
bacula.
All my data stored to tape (LT02). Tape has 8 slot.
I was using incremental backup.
But i have a problem, if all my tape have full and then i insert the new
tape, it'll run full backup.
I'm so confused.
Some history:
On 01/14/2010 16:24, Dan Langille wrote:
> Steve Costaras wrote:
>> On 01/14/2010 15:59, Dan Langille wrote:
>>> Steve Costaras wrote:
I see the mtimeonly flag in the fileset options but there are many
caveats about using it as you will miss other files that may have been
Steve Costaras wrote:
>
> On 01/14/2010 15:59, Dan Langille wrote:
>> Steve Costaras wrote:
>>
>>> I see the mtimeonly flag in the fileset options but there are many
>>> caveats about using it as you will miss other files that may have been
>>> copied over that have retained mtimes from before the
On 01/14/2010 15:59, Dan Langille wrote:
> Steve Costaras wrote:
>
> > I see the mtimeonly flag in the fileset options but there are many
> > caveats about using it as you will miss other files that may have been
> > copied over that have retained mtimes from before the last backup.
> > Since bac
Steve Costaras wrote:
> On 01/14/2010 15:11, Martin Simmons wrote:
>>> On Wed, 13 Jan 2010 20:18:19 -0600, Steve Costaras said:
>>>
>>> Ok, found out why when I do a restore of files bacula keeps thinking
>>> that they are 'new' and will back them up again. Seems that bacula
Ok, then let me ask this in a different way. How do you prevent Bacula
from backing up files that were just restored?
I see the mtimeonly flag in the fileset options but there are many
caveats about using it as you will miss other files that may have been
copied over that have retained mtimes
> On Wed, 13 Jan 2010 20:18:19 -0600, Steve Costaras said:
>
> Ok, found out why when I do a restore of files bacula keeps thinking
> that they are 'new' and will back them up again. Seems that bacula
> changes ctime to the time of the restore of the file not the original
> ctime. atime
From: Shone Russell
>To: bacula-users@lists.sourceforge.net
>Sent: Tue, January 12, 2010 5:46:42 PM
>Subject: [Bacula-users] Bacula console command
>
> > >
>This is the message that I am receiving, can some please help.
>>
>>The Bacula console command /sbin/bconsole is not configured with a valid
Hello,
This is to let you know that I am off line making my annual migration from
snowy Switzerland to sunny southern France. If all goes well I will be back
online early next week. In the mean time, Eric is watching the shop.
Thanks,
Kern
---
On Thu, 2010-01-14 at 17:10 +0100, Ralf Gross wrote:
> Uwe Schuerkamp schrieb:
> > Hi folks,
> >
> > I just set up the first 3.0.3 bacula server (compiled from source on
> > CentOS 5.4) in our environment and was wondering wether 2.x clients
> > cann still talk to a 3.x server version? I cannot te
Uwe Schuerkamp schrieb:
> Hi folks,
>
> I just set up the first 3.0.3 bacula server (compiled from source on
> CentOS 5.4) in our environment and was wondering wether 2.x clients
> cann still talk to a 3.x server version? I cannot test this right now
> without going through major changes because t
;)
I learned from my mistakes
2010/1/14 Pedro Gomes :
> Genuis how come i didn't remeber that.
>
> I will try to format the drive to ext4
>
> On Thu, Jan 14, 2010 at 3:32 PM, Carlo Filippetto
> wrote:
>> FAT32 don't support file larger the 4Gb
>>
>>
>>
>> 2009/12/22 Pedro Gomes :
>>> Folder
I think tha the different are very poor..
from http://www.bacula.org/en/rel-manual/Messages_Resource.html
"OperatorCommand is similar to the MailCommand except that it is used
for Operator messages. "
In your jobs you can decide witch one to use.
I have create a third one named "custom".. I use o
Genuis how come i didn't remeber that.
I will try to format the drive to ext4
On Thu, Jan 14, 2010 at 3:32 PM, Carlo Filippetto
wrote:
> FAT32 don't support file larger the 4Gb
>
>
>
> 2009/12/22 Pedro Gomes :
>> Folder as mode set to 777, i know that i won't be necessary all the
>> permissi
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am 2010-01-12 17:46 schrieb Shone Russell:
> This is the message that I am receiving, can some please help.
>
> The Bacula console command /sbin/bconsole is not configured with a valid
> Bacula director host. It is currently using , which does not ex
Shone Russell wrote:
> This is the message that I am receiving, can some please help.
>
> The Bacula console command /sbin/bconsole is not configured with a valid
> Bacula director host. It is currently using , which does not exist
Sounds like bconsole.conf is not correctly configured or cannot
Thanks Carlo.
I solved it by editing the "standard" section of messages { instead the
"daemon" section.
By the way, whats the diference between both sections?
King Regards
Ariel
2010/1/14 Carlo Filippetto
> try somethig like
>
> mailcommand = "$PATH/bsmtp -h localhost -f \"(BCK) bac...@storag
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
__Martin
Many thanks for your reply, i have two things here (which are quite
long):
First, another debug of baculca-fd where something diffrent in the
debug of:
(Note: Nothing changed in configuration etc... )
- ---
$> bacula-fd -f -u root -g bac
On 2010Jan14 7:25 AM, Gavin McCullagh wrote:
[...]
> One way to make it more concise would be to drop the repetition of
> the directory name, something like.
>
> JobId X:
> c:/WINDOWS/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a
> links elsewhere. Not Following.
>
> If
FAT32 don't support file larger the 4Gb
2009/12/22 Pedro Gomes :
> Folder as mode set to 777, i know that i won't be necessary all the
> permissions but even so i'm no able to make it work.
> As for mount, the usb drive is auto-mounted via etc/fstab.
>
> The filesystem is FAT32, is there any pro
try somethig like
mailcommand = "$PATH/bsmtp -h localhost -f \"(BCK) bac...@storage.it
\" -s \"%t %e of %n %l\" %r"
CIAO,
Carlo
2009/12/22 Ariel Di Girolamo :
> Hi, i´m a new user of Bacula and i´m getting problems to receive
> notification to my mail address when a job is done.
> I´m running B
Hi folks,
I just set up the first 3.0.3 bacula server (compiled from source on
CentOS 5.4) in our environment and was wondering wether 2.x clients
cann still talk to a 3.x server version? I cannot test this right now
without going through major changes because the new server is not at
its "final d
Juergen,
I'm not really expert on Volume managing (i'm new on bacula's
world :-$), but it might have some relations about the messages you're
getting about volume purging and recycling time. You should check you
retention periods for volumes, for example.
I'm sure it would be very helpful for any
Hello,
When trying to restore a job, I get an error saying that the SD was
unable to execute the bootstrap instruction.
Error message:
18-Dec 11:28 bacula001-dir JobId 12217: Start Restore Job RestoreFiles.
2009-12-18_11.28.33_31
18-Dec 11:28 bacula001-dir JobId 12217: Using Device "Online.
Hi All,
New to Bacula so please be gentle...
I have set up a full backup system to run every night -> backing up to a
Sony AIT-3 tape system.
So far everything seems to work, but I would like to run a tape log rotation
system (tape a tape home each night and replace with another tape, 3 in
tota
Folder as mode set to 777, i know that i won't be necessary all the
permissions but even so i'm no able to make it work.
As for mount, the usb drive is auto-mounted via etc/fstab.
The filesystem is FAT32, is there any problem with this ?
On Mon, Dec 21, 2009 at 8:40 PM, John Drescher wrote:
> 20
> "alaric" == Phil Stracchino writes:
alaric> Actually, I have a suspicion I may know what's going
alaric> on here, with more thought. Is it perhaps the case
alaric> that 'modify Pool' in the console on a manually
alaric> started job overrides the Pool directive in the Job,
Hi, i´m a new user of Bacula and i´m getting problems to receive
notification to my mail address when a job is done.
I´m running Bacula 2.4.4 over a VM on VMware server, running Ubuntu 9.10
This is my bacula-dir.conf messages section:
Messages {
Name = Daemon
mailcommand = "/usr/lib/bacula/bs
This is the message that I am receiving, can some please help.
The Bacula console command /sbin/bconsole is not configured with a valid Bacula
director host. It is currently using , which does not exist
___
Howdy friends,
I'm using bacula in our companny backup system. But I always have a problem
if our tape have been full. I'm using diffrensial bacula backup. If our tape
full then i changed with the new tape, it will be full backup again and
continue to do so.
Please help me!!!
Thanks advanced
I tried disabling any power saving features.. but the backup faild!!
I haven't any othe nic card (the server is 600km away) and I can't do
nothig manually..
The driver is ok
Now??
what can I tried??
2010/1/13 Josh Fisher :
>
> Carlo Filippetto wrote:
>>
>> Hi all,
>> I have a problem when backu
Hi!
We have a problem with Bacula 3.0.2 (Update from 2.x).
Some backups starts normally. Bacula purged and recycled the inserted
tape. Suddenly Bacula says "Can not find any appendable volumes. Please
use the "label" command to create a new volume for ...".
Exactly one hour later, then Bacula
> On Thu, 14 Jan 2010 11:52:48 +0100, Simon Spring said:
>
> Hi Martin
> ...
> >>
> >> Here is what i get from debug on the client:
> >>
> >> $> bacula-fd -c /etc/bacula/bacula-fd.conf -v -s -d350 -f
> >> bacula-fd: filed_conf.c:438-0 Inserting director res: godzilla-mon
> >> gnadmin-fd: messa
On Wed, Jan 13, 2010 at 02:52:23PM -0600, Johnston, James C. (GRC-RXP0) wrote:
> I'm successfully running Bacula 3.0.1 on several systems, but when I try to
> set up the client on a 64 bit version of Open SuSE 10.3 I can configure,
> make, and install fine but when I try to start bacula-fd it fai
Did anyone ever work out how to solve this?
I've a fresh install of bacula on a fresh virtual machine (had it working
fine in a previous version too - so I know what I'm doing).
3.0.3 has jobs as waiting execution after the first job has ran. I've spent
2 days trying to solve this, does anyone h
I'm resending this mail as it seems it didn't get accepted by mailman.
Hello people, please excuse my bad english.
I'm having some issues with my schedules/pool configuration, my idea is
to run a full backup every 3 days, doing incremental in the middle.
At some point, I keep no full backup, as it
I'm successfully running Bacula 3.0.1 on several systems, but when I try to set
up the client on a 64 bit version of Open SuSE 10.3 I can configure, make, and
install fine but when I try to start bacula-fd it fails, telling me that it
can't find libbacfind.so.1. When I look in /usr/lib libbacfin
Hi!
I am contacting you because you have in the past shown interest in
MySQL and from that I assume you are interested in the future
well-being of MySQL.
Now you have a unique opportunity to make a difference. By signing
the petition at http://www.helpmysql.org you can help affect the
future of
Lukasz PUZON Brodowski a écrit :
> hi all.
> I install bacula 3.0.3 on 7.2 freebsd system, with mysql (sqlite before). in
> both cases, when I run my only job,
> bacula-dir crashes. I run bacula with -d100 option, and last error is:
> ABORTING due to ERROR in lockmgr.c:65 Mutex lock failure. ERR=
Hi all,
I am trying to build a static binary of bacula-fd.
I found this thread:
http://www.mail-archive.com/bacula-users@lists.sourceforge.net/msg33494.html
http://sourceforge.net/mailarchive/message.php?msg_name=3838017D92B3C445BA200CE3B6A821A40A7482%40cetus.dawnsign.com
I followed the instruc
Hi,
On Thu, 14 Jan 2010, Dan Langille wrote:
> >Would it be possible for Bacula to give a more precise answer? The
> >message:
> > "x is a different filesystem"
> Can you think of a better and concise message?
This is an example one I've seen:
JobId X:
c:/WINDOWS/assembly/GA
> On Wed, 13 Jan 2010 18:38:04 -0600, Jon Schewe said:
>
> On 01/13/2010 02:09 PM, Martin Simmons wrote:
> >> On Tue, 12 Jan 2010 16:38:08 -0600, Jon Schewe said:
> >>
> >> I have standard backups (incremental, differential, full) going to tape
> >> using a pool named Defa
Gavin McCullagh wrote:
> Hi,
>
> many thanks for clearing this up for me.
>
> On Wed, 13 Jan 2010, Josh Fisher wrote:
>
>> Windows calls these "junction points". Windows implements directory
>> symlinks as junction points, the only difference being that rather than a
>> completely different file
Hi,
many thanks for clearing this up for me.
On Wed, 13 Jan 2010, Josh Fisher wrote:
> Windows calls these "junction points". Windows implements directory
> symlinks as junction points, the only difference being that rather than a
> completely different filesystem being mounted at the junction p
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Moray
Am 13.01.2010 um 17:56 schrieb Moray Henderson:
...
>
> Does the password contain any characters outside the ASCII range
> 32-127?
> If so, it might be a codepage conversion problem.
I'm afraid, no, all "standard" chars from a-z and 0-9. Eve
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Martin
...
>>
>> Here is what i get from debug on the client:
>>
>> $> bacula-fd -c /etc/bacula/bacula-fd.conf -v -s -d350 -f
>> bacula-fd: filed_conf.c:438-0 Inserting director res: godzilla-mon
>> gnadmin-fd: message.c:259-0 Copy message resource
Hi,
Martin Simmons a écrit :
>> On Wed, 13 Jan 2010 14:18:18 +0100, David Dumortier said:
>> Importance: Normal
>>
>> Hi all,
>>
>> I try to query MySQL to obtain all the date of backup for a file.
>> I used this but have only the last backup :
>>
>> :List all backup for a File with date :
>>
51 matches
Mail list logo
