>Hi, again.
>> Hello everybody,
>>
>>
>> I use Bacula 1.38.2 whith HP SSL 1016 Autoloader.
>>
>> SD Config:
>>
>> # This is the definition for a
>> # HP SSL1016 Ultrium 460 Autoloader
>> #
>> Autochanger {
>> Name = HP-Library
>> Device = HP-SSL1016
>> Changer Device = /dev/sg2
Hello Joshua,
On Mon, 12 Dec 2005 16:55:11 -0900 Joshua Kugler
<[EMAIL PROTECTED]> wrote:
> All -
>
> After using Bacula for almost a year, I'm having to make some
> configuration changes due to network topology and firewalls.
>
> The situation is this: The network server is behind a firewall.
On 1 Dec 2005 at 10:37, Kern Sibbald wrote:
> Yes, a shorter Volume retention period will "force" pruning of job and file
> data, but as the manual and a recent email point out, after changing the .conf
> volume retention period, you must update the catalog data for volumes that
> already exist.
On 2 Dec 2005 at 20:09, Martin Simmons wrote:
> I suggest you post the output of "llist volumes".
Did all that, no response :-(
Anyhow, I still have to manually purge each tape, how do I get around this.
--
Harondel J. Sibble
Sibble Computer Consulting
Creating solutions for the small busin
What happened is that the upgrade to 1.38 overwrote my modified mtx-changer
script with the default, so you are correct, that was the problem. Still
leaves the strange error message though.
Thanks,
Rob
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kern
Phil Stracchino wrote:
> Didier Herrera wrote:
>
>>Hello all,
>>I've been trying to install a Bacula client on a Sun ultra 10 with OS
>>Solaris 2.8, I use the following to configure:
>>CFLAGS="-g" ./configure \
>> --sbindir=/bacula/bin \
>> --sysconfdir=/bacula/bin \
>> --enable-client-only \
>> -
More data from the job report:
This is from the e-mail status report:
12-Dec 16:20 herodotus-dir: RunBefore: Starting SSH-tunnel to
locus.dist-ed.uaf.edu...
12-Dec 16:42 herodotus-dir: Start Backup JobId 8846,
Job=locus.2005-12-12_16.20.36
12-Dec 16:47 locus-fd: locus.2005-12-12_16.20.36 Warnin
Didier Herrera wrote:
> Hello all,
> I've been trying to install a Bacula client on a Sun ultra 10 with OS
> Solaris 2.8, I use the following to configure:
> CFLAGS="-g" ./configure \
> --sbindir=/bacula/bin \
> --sysconfdir=/bacula/bin \
> --enable-client-only \
> --enable-smartalloc \
> --wi
All -
After using Bacula for almost a year, I'm having to make some configuration
changes due to network topology and firewalls.
The situation is this: The network server is behind a firewall. The clients
I'm trying to back up are on the "other side" of the firewall (a DMZ of
sorts). The net
Hello all,
I've been trying to install a Bacula client on a Sun ultra 10 with OS
Solaris 2.8, I use the following to configure:
CFLAGS="-g" ./configure \
--sbindir=/bacula/bin \
--sysconfdir=/bacula/bin \
--enable-client-only \
--enable-smartalloc \
--with-pid-dir=/bacula/bin/working \
--w
Hi, again.
Dihor, Viktor schrieb:
Hello everybody,
I use Bacula 1.38.2 whith HP SSL 1016 Autoloader.
SD Config:
# This is the definition for a
# HP SSL1016 Ultrium 460 Autoloader
#
Autochanger {
Name = HP-Library
Device = HP-SSL1016
Changer Device = /dev/sg2
Changer Command = "/u
Mit freundlichen Grüßen,
Viktor Dihor
Fernwärme Ulm GmbH
Tel. +49-731-3992-267
Fax. +49-731-3992-5-267 E-Mail: [EMAIL PROTECTED]
Magirusstrasse 21
89077 Ulm
Dieses E-Mail ist vertraulich. Wenn Sie nicht der rechtmäßige
Empfänger sind, dürfen Sie den Inhalt weder kopieren,
verbreiten oder
On Mon, Dec 12, 2005 at 08:33:17PM +0100, Arno Lehmann wrote:
> Unfortunately, you did miss something :-P
>
> From the maual, section "Configuring the Director", subsection "Jobs":
>
> Max Start Delay =
Yes, that looks like it should do what I need. I'm pretty sure that I
read through that se
On Mon, 12 Dec 2005, 10:02:50PM +0100¨, Arno Lehmann said:
> Hello,
> Not having -devel packages installed is a rather common error...
indeed. Thanks a lot, zlib-devel sure helped. Tomorrow I'll start
configuring it ;-)
--
Groeten,
J.I.Asenjo
--
Hello,
Natxo Asenjo schrieb:
hi,
[moderator, please forgive my 2 former emails, wrong sender address, it
should be corrected now]
while trying to compile the latest bacula I get the following errors in
make dird, stored and tools (the last 3 steps):
/usr/bin/g++ -O -L../lib -L../cats -L../fi
On Mon, Dec 12, 2005 at 09:48:30PM +0100, Natxo Asenjo wrote:
> hi,
>
> [moderator, please forgive my 2 former emails, wrong sender address, it
> should be corrected now]
>
> while trying to compile the latest bacula I get the following errors in
> make dird, stored and tools (the last 3 steps):
Natxo Asenjo wrote:
hi,
[moderator, please forgive my 2 former emails, wrong sender address, it
should be corrected now]
while trying to compile the latest bacula I get the following errors in
make dird, stored and tools (the last 3 steps):
/usr/bin/g++ -O -L../lib -L../cats -L../findlib -o
Hello everybody,
I use Bacula 1.38.2 whith HP SSL 1016 Autoloader.
SD Config:
# This is the definition for a
# HP SSL1016 Ultrium 460 Autoloader
#
Autochanger {
Name = HP-Library
Device = HP-SSL1016
Changer Device = /dev/sg2
Changer Command = "/usr/local/bacula-1.38.3/etc/mtx-chan
hi,
[moderator, please forgive my 2 former emails, wrong sender address, it
should be corrected now]
while trying to compile the latest bacula I get the following errors in
make dird, stored and tools (the last 3 steps):
/usr/bin/g++ -O -L../lib -L../cats -L../findlib -o bscan bscan.o
block.o d
Kern Sibbald schrieb:
Hmmm. I think I am going to pack it in and take a year's vacation ...
Damn :-)
You _did_ notice Richard Knights Mail, right?
By the way - I have left the backup server in the state I described.
Logging is turned off because my limited disk-space would soon result in
m
Kern Sibbald schrieb:
On Monday 12 December 2005 20:10, Rob wrote:
FYI, I haven't had time to look into it much, but I have been seeing errors
with my auto changer since 1.38.1 that I had never seen with 1.36.* before
that look a lot like these. As Kern said, as if something seems to be
miss
Hi,
Arno Lehmann schrieb:
Hi,
Kern Sibbald schrieb:
...
Anyway, I would really appreciate it if you could try the 1.38.3
beta. Please use the released tar file rather than the CVS -- the
HEAD CVS is now slightly behind the 1.38 branch in terms of fixes ...
I'll download it in a few minu
On Monday 12 December 2005 20:10, Rob wrote:
> FYI, I haven't had time to look into it much, but I have been seeing errors
> with my auto changer since 1.38.1 that I had never seen with 1.36.* before
> that look a lot like these. As Kern said, as if something seems to be
> missing from the log, see
Hmmm. I think I am going to pack it in and take a year's vacation ...
On Monday 12 December 2005 20:21, Arno Lehmann wrote:
> Hi,
>
> Arno Lehmann schrieb:
> > Hi,
> >
> > Kern Sibbald schrieb:
>
> ...
>
> >> Anyway, I would really appreciate it if you could try the 1.38.3
> >> beta. Please use
Hello,
Florian Daniel Otel schrieb:
Hello all,
I have a short question: Is there any documentation (formal or
otherwise) describing the SQL databases structre (table structure,
usage, etc.) used by the MySQL backend ? The only help in that respect
is the "query.sql" file that gives some hints o
One idea:
[EMAIL PROTECTED] schrieb:
Ok I have increased the sleep time in the mtx-changer file so we will see
what that does, however I am not very hopeful as most of the time, when I
get this error message it has been sitting for hours, I do a mount and it
still happens...
Use the function w
Hello,
John Kodis schrieb:
On Mon, Dec 12, 2005 at 03:23:39PM +0100, Jo wrote:
Why don't you change the schedule so no backups are made on Saturday
and Sunday?
I may end up doing something like that (I'd only skip incrementals on
the first Saturday and Sunday of the month), although I was
FYI, I haven't had time to look into it much, but I have been seeing errors
with my auto changer since 1.38.1 that I had never seen with 1.36.* before
that look a lot like these. As Kern said, as if something seems to be
missing from the log, see:
04-Dec 03:34 bug-sd: End of Volume "NJO008D" at 80
Hello,
Kern Sibbald schrieb:
On Monday 12 December 2005 12:54, Volker Dierks wrote:
Sorry, I forgot to attach the file ... here it is.
Well, you fell into a documentation error. Please remove the line from your
Device resources that says:
Maximum Changer Wait = 10 minutes
it is incorr
Hi all,
A couple of weeks ago I upgraded my Bacula installation from 1.34 to
1.38.1. I made a few other changes at the same time and everything has
been working well since. Yesterday I decided to upgrade to 1.38.3. I
built from source using the same configuration options that I used to
build
On Sun, 11 Dec 2005, Kern Sibbald wrote:
The bscan problem that I found caused it to generate a JobMedia record in the
database that had an end FileIndex one less than it should have been. This
was the last record on a Volume, and the record was continued on the next
Volume. When Bacula constr
20 Gb is a small amount of data. I would
suggest to use rsync to get a local copy of data (using compression, and
other features), and than copy data on tape, hopefully with bacula.
--
Ferdinando Pasqualetti
G.T.Dati srl
Tel.
Hello all,
I have the following robustness-related question:
I am deploying bacula as a multi-site backup soultion, where a central
tape storage gets relatively large quantities of data (aprox 20
GBytes per day) from multiple sites via net links of dubious
reliability.
I am considering two pos
Well, the strange ting is that the crash happens every time bacula-dir
reach 516MB memory usage, and mysql i steady on same consumption as when
started.
And we have used bacula before (1.6) without these problems. Anyone else
tried bacula on these amount of files?
Kern Sibbald wrote:
Hello,
On Mon, Dec 12, 2005 at 03:23:39PM +0100, Jo wrote:
> Why don't you change the schedule so no backups are made on Saturday
> and Sunday?
I may end up doing something like that (I'd only skip incrementals on
the first Saturday and Sunday of the month), although I was hoping for
a more general solu
John Kodis wrote:
On Mon, Dec 12, 2005 at 02:05:16PM +0100, Jo wrote:
I'm not so sure this is a waste of resources. Only the files that were
changed will be in those incrementals. The first one will catch all the
files that changed while the full was running. The second one will be
virtua
On Monday 12 December 2005 12:54, Volker Dierks wrote:
> Sorry, I forgot to attach the file ... here it is.
>
Well, you fell into a documentation error. Please remove the line from your
Device resources that says:
Maximum Changer Wait = 10 minutes
it is incorrect. Despite what the *old* docu
On Monday 12 December 2005 12:52, Volker Dierks wrote:
> Hello,
>
> Volker Dierks wrote:
> >> Usually, I'd see if the problem can be reproduced with the existing
> >> system setup. If that's possible, I'd first check if the actual cause
> >> might be purely SCSI device related.
> >
> > That's what
On Mon, Dec 12, 2005 at 02:05:16PM +0100, Jo wrote:
> I'm not so sure this is a waste of resources. Only the files that were
> changed will be in those incrementals. The first one will catch all the
> files that changed while the full was running. The second one will be
> virtually empty.
In m
Ok I have increased the sleep time in the mtx-changer file so we will see
what that does, however I am not very hopeful as most of the time, when I
get this error message it has been sitting for hours, I do a mount and it
still happens...
-
Thank you,
Grant Della Vecchia
System Administrator
---
Hello all,
I have a short question: Is there any documentation (formal or
otherwise) describing the SQL databases structre (table structure,
usage, etc.) used by the MySQL backend ? The only help in that respect
is the "query.sql" file that gives some hints on how things are looked
up in the bacul
Hello,
[EMAIL PROTECTED] wrote:
The biggest problem I have is the following error message;
Warning: Couldn't rewind device /dev/nst0 ERR=dev.c:406 Rewind error on
/dev/nst0. ERR=Input/output error.
so far as I have learned it, ERR=Input/output error on the drive device
means that the loaded ta
[EMAIL PROTECTED] wrote:
> The biggest problem I have is the following error message;
>
> Warning: Couldn't rewind device /dev/nst0 ERR=dev.c:406 Rewind error on
> /dev/nst0. ERR=Input/output error.
>
> I get this error message all the time and of course my backups do not
> run due to this error.
John Kodis wrote:
I've been using the standard monthly-full, weekly-differential, and
daily-incremental backup scheme that's provided by the bacula-supplied
configuration files. This is all working fine, but I've now added
enough clients that a full backup takes just over two days.
After the f
Hello Bacula List…
I am having a problem with 1 of my bacula installations.
Currently, I have 2 bacula installations both are running on Linux, Redhat 9
with kernel 2.4.20-31.9smp
One us using a Dell PowerVault 120T with 8 DDS 4 tapes and
bacula 1.36.3, this one runs great no problems
I've been using the standard monthly-full, weekly-differential, and
daily-incremental backup scheme that's provided by the bacula-supplied
configuration files. This is all working fine, but I've now added
enough clients that a full backup takes just over two days.
After the full backup completes,
Hello,
Yes, several people including Volker pointed out that my reverse lookup
(controlled by the ISP) pointed to a non-existent domain. I reported this to
my ISP, Sunrise, and not only did they fix it within an hour, but they called
me back to say that it was fixed !
On Monday 12 December 20
On Monday 12 December 2005 12:35, Daniel Holtkamp wrote:
> Hi !
>
> Is there a switch for rpmbuild that only builds the clients and only
> checks the dependencies for those ?
>
> I didn`t find anything checking the specfile but maybe i missed it.
>
> Would be nice if i could just specify "rpmbuild
Sorry, I forgot to attach the file ... here it is.
Volker
conf.tgz
Description: GNU Unix tar archive
Hello,
Volker Dierks wrote:
Usually, I'd see if the problem can be reproduced with the existing
system setup. If that's possible, I'd first check if the actual cause
might be purely SCSI device related.
That's what I'm going to do first. I'll create the second pool again
(with the same tapes)
Hello,
I repeat what I said the last time: this looks like a MySQL problem. Given the
new information you have presented, and the fact that you are having problems
when working with almost 9 million files backed up (a lot), I would suspect
that the problem is with your MySQL configuration. If
Hi !
Is there a switch for rpmbuild that only builds the clients and only
checks the dependencies for those ?
I didn`t find anything checking the specfile but maybe i missed it.
Would be nice if i could just specify "rpmbuild --rebuild --define
"build_rh7 1" --define "client_only 1" bacula.s
Are you running make or make install here (looks like the latter)? You need
to do make before make install.
If that doesn't work, then to rule out any interaction with previous problems,
I suggest you start with afresh (from the source tar file into an empty
directory), run your configure and the
I Tried to upgrade MySQL to 5. and recomile bacula (yes I did a make
distclean), but same error, have now installed MySQL 4.1.15 again, and
recompiled bacula again, deleted the database and deleted the tapes so I
could start fresh.
When trying to restore from a large job, bacula crashes, when
54 matches
Mail list logo
