I have recently integrated with a switch using chan_ss7 0.90. Calls
were passing thru from IAX to ss7 and voice quality is excellent. I
haven't done calls from ss7 to IAX since they have to change something
at the switch (routing). I have a few observations though.
1. When I use IAX to call ss7 a
Maybe you could set different linksets for the 2 links and address
them accordingly when dialling.
On 12/13/06, Anton <[EMAIL PROTECTED]> wrote:
Hi! Have anyone implemented the possibility to chose a link
in linkset to be dialed through?
For example in configuration
[linkset1]
[link-l1]
links
8:31 PM, Vernier Umali wrote:
> I already set the digium card in its own IRQ. IRQ misses are now zero
> after a few days. The errors below are still coming up in the logs.
> Any ideas? BTW, the switch is an Alcatel. Thanks
>
> On 12/7/06, Vernier Umali <[EMAIL PROTECTED]> wrote:
thanks for the assurance. I'll post something here once we go to
production or do stress tests on the system.
On 12/21/06, Matthew Fredrickson <[EMAIL PROTECTED]> wrote:
On Dec 20, 2006, at 3:05 AM, Vernier Umali wrote:
> Relocating IRQ seems to work. IRQ misses are null now
Seems like all implementations with this problem is with version 0.9.
Is it also occuring with version 0.84?
On 2/16/07, Anton <[EMAIL PROTECTED]> wrote:
Do you mean Sifira have confirmed that there is a REAL
problem? Is there any info what (all?) versions of chan_ss7
are affected? I did experie
That has happened to me also. Reply from engineer is that the switch
has to have a value in callerid.
On 3/16/07, Anton <[EMAIL PROTECTED]> wrote:
Your telco may not allow calls with no callerid - ask them
On 16 March 2007 11:52, umar tarar wrote:
> you can logically avoid this problem by givin
number)=2342342) etc or whatever your switch will accept.
-wasim with top posting madness
On 3/16/07, Vernier Umali <[EMAIL PROTECTED]> wrote:
> That has happened to me also. Reply from engineer is that the switch
> has to have a value in callerid.
>
> On 3/16/07, Anton <[EMAIL
I have an asterisk box connected for sometime now to an ss7 network.
One of the issues I have sometimes is echo. Is there a way to enable
echocancellation in chan_ss7? I'm using chan_ss7 0.90 and asterisk
1.2.17. Thanks
___
--Bandwidth and Colocation pro
hocan_taps => 128
Best regards
Anders Baekgaard
On Thursday 22 March 2007 07:53, Vernier Umali wrote:
> I have an asterisk box connected for sometime now to an ss7 network.
> One of the issues I have sometimes is echo. Is there a way to enable
> echocancellation in chan_ss7? I'
Greetings,
We got a hold of a Performance Technologies PCI384 SS7 card. We were
thinking of making it run on an asterisk setup. Is this possible?
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or upd
Sometimes there are errors in transmission that resulted in the telco
side blocking the connections. Some telcos do not have automatic
removal of blockage hence you have to tell them to unblock it.
On 6/18/07, Ercan Yücebas <[EMAIL PROTECTED]> wrote:
>
>
>
>
>
>
> Hello Goksie
>
>
>
> We did this
Maybe the cable is connected to the wrong port?
On 10/5/07, Matthew Fredrickson <[EMAIL PROTECTED]> wrote:
> Markus A. Wipfler wrote:
> > Hi Tobias,
> >
> > Red Alarm on the card usually indicates a physical problem, I might be
> > wrong but check your cabling.
>
> Yes, I second that. IIRC, in yo
If you do a zrcfg -v, you would have errors in channels after 48
since T1 only supports 24 channels per port.
On 10/8/07, Tobias Wolf <[EMAIL PROTECTED]> wrote:
> Hi,
>
> i have just registered at www.digium.com to get the Documentation. I
> fear that the spans on the card are configured for T
It appears that way.
On 10/9/07, Tobias Wolf <[EMAIL PROTECTED]> wrote:
> Hi,
>
> Vernier Umali schrieb:
> > If you do a zrcfg -v, you would have errors in channels after 48
> > since T1 only supports 24 channels per port.
> >
> Ok, so if ztcfg shows that
14 matches
Mail list logo
