Hi Joseph,
Check with your termination Provider and also Check
your dialplan
Regards
Mesbah
On Thu, Oct 22, 2015 at 9:54 PM, Joseph Jackson wrote:
> Hi all,
>
> Stats:
>
> Asterisk 1.8.26.1
>
> libss7 version: 1.0.2
>
> DAHDI Version: 2.6.1 Echo Canceller: HWEC
>
>
>
Hello,
Chan_ss7 can according to your requirement. Please read the examples
provided by chan_ss7 with multple point codes.
Regards
Mesbah
On Thu, Jul 14, 2016 at 8:23 AM, Rafael dos Santos Saraiva <
rafaels...@gmail.com> wrote:
> Hi there
>
> My scenario is the follow:
>
> My pointcode is 3500,
> Thanks for your reply.
> My problem is use the same point code in two hosts. The example in
> chan_ss7 is about use multiple pointcodes in one host.
>
> 2016-07-14 5:37 GMT-03:00 Mesbahuddin Malik :
>
>> Hello,
>> Chan_ss7 can according to your requirement. Please read
Hi,
Please send me your
1.chan_dahdi.conf
2.dahdi -system.conf
Then I can solve your problem
Thanks
Mesbah
On Tue, Feb 10, 2009 at 9:12 PM, Florian Smeets wrote:
> On 1/27/09 6:12 PM, Matthew Fredrickson wrote:
> > Florian Smeets wrote:
> >> Hi
> >>
> >> i'm trying to connect a Motorola MSC
Hi,
According to your log it seems something wrong with your /etc/dahdi/system
file and
/etc/asterisk/chan_dahdi.conf file.
Can you post those Files here ?
Thanks
Mesbah
On Fri, Mar 27, 2009 at 10:23 AM, Gopalakrishnan A.N wrote:
> Hi,
>I am using asterisk 1.4 version with libss7 and dadhi
;
> On Fri, Mar 27, 2009 at 3:56 PM, Mesbahuddin Malik
> wrote:
>
>> Hi,
>> According to your log it seems something wrong with your
>> /etc/dahdi/system
>> file and
>> /etc/asterisk/chan_dahdi.conf file.
>>
>> Can you post those Files here ?
>
As LIB PRI is a part of SS7 so no need to install lib PRI
Thanks
Mesbah
On Sat, Apr 18, 2009 at 5:26 PM, Kashif Ali wrote:
> Dear all,
>
> i wan to configure digium te412p card as ss7 interface. i installed
> libss7,dahdi and asterisk. Do i need to install lip pri also to work on ss7?
>
> best r
Hi,
What problem you face ?
1. You have some mistaken at 2nd -4th E1
2. There is some problem at your chan_dahdi.conf
Fix all those
Thanks
Mesbah
On Sat, Apr 18, 2009 at 1:23 PM, Gobinda Paul wrote:
> Hi,
>
> I am facing some problem to configure ss7 with asterisk.Here is my
> config
Hi,
For various reasons this happen. The main reasons are
1.Firewall
2.Libss7 version Mitch Matching
3. CIC Mismatch
4. Terminal End firewall issues
so check the above and let me know . I can help you in this respect.
Best regards
Mesbah
On Sat, Apr 18, 2009 at 8:14 PM, Daniel Pizarro Bust
Dear Gobinda,
Still have the problem. I am little bit busy now . Tomorrow I may check
with you .
BR
Mesbah
On Sat, Apr 18, 2009 at 8:29 PM, Gobinda Paul wrote:
> Hi mesbah,
>
> Thanks for your reply, i have made some changes ,
> -
> [r...@loca
Hi,
install asterisk+DAHDI+libss7.
Go to http://downloads.digium.com/pub
Thanks
Mesbah
On Sat, Apr 25, 2009 at 12:27 AM, Amit Bhayani wrote:
> Hi Guys,
>
> I am trying to configure the Asterisk + Libss7. I have successfully
> installed libss7 and asterisk, still I don't see chan_zap.so in
> /
Hi,
Post ur extension.conf here
Rgds
Mesbah
On 10/8/09, Jean Cérien wrote:
>
>
> Hello
>
> I am struggling to restrict the presentation of the callerid with libss7.
> It is always presented, even when I set CALLERPRES()=prohib
>
> My setup:
> Sip phone1 -> A* #1 -> dahdi/libss7 -> e1 -> dahdi/
d(pres) : ${CALLERID(pres)})
> exten => _88.,n,Dial(dahdi/r1/${EXTEN:2})
>
>
>
>
> On Wed, Oct 7, 2009 at 4:39 PM, Mesbahuddin Malik
> wrote:
>
>> Hi,
>> Post ur extension.conf here
>>
>> Rgds
>> Mesbah
>>
>>
>> On 10/8/
Hi ,
1. asterisk -rx"dahdi show status"
2. set ss7 debug and check the output
3.Check OPC,DPC and if the Right Cable is connected for Signalling.
Rgds
Mesbah
On 5/18/10, Deepika Nijhawan wrote:
>
> Hi,
>
>
>
> I am trying to configure ss7 link between Telsis and Asterisk. I am using
Hi,
1. Is other End running ISDN PRI or SS7 ?
2. from asterisk can u check ss7 show linkset 1 ?
Rgds
Mesbah
On 5/18/10, Deepika Nijhawan wrote:
>
> Hi,
>
>
>
> Please find it below:
>
>
>
> 1.
>
> asterisk4*CLI> dahdi show status
>
> Description Alarms
Hi,
Do you mean both ends are configured with asterisk and libss7 ? Which
device is providing you the master clock ?
Can you plz explain me what are u going to implement and what devices you
have ?
Rgds
Mesbah
On 5/18/10, Deepika Nijhawan wrote:
>
> Hi Mesbah,
>
>
>
> 1.
>
> I meant
Hi ,
I got your point. You have configured the Telesis Side SS7 and also
configured the circuit and Timeslot correctly .
You have two 4E1 cards installed at your asterisk server .
It seems to me the Signalling cable mismatching . Can you do a test ?
1. Pull all the E1 Cables from 1st
Hi,
1. Better to keep Single E1 for Signalling Test
2. Can you off crc4 at asterisk side ?
3. Did you try the Fisrt E1 Cable with First 4E1 and also in the 2nd 4E1
Cable ?
4. Can you reboot once the asterisk server ?
5.check the ss7 link status from asterisk server ?
Rgds
Mesbah
On
Hi,
Another one thing in which format you put the pointcode and DPC value in
chan_dahdi.conf file?
It must be in Decimal Values.
Rgds
Mesbah
On 5/19/10, Deepika Nijhawan wrote:
>
> Hi Mesbah,
>
>
>
> It can be possible. One thing, on Telsis trunk card which is connected to
> this Asteri
Hi,
Give me some information mentioned below
1. Which version of asterisk ,dahdi and libss7 you installed
2. OS Kernel Version
3.IPTables and SELinux Status
4. Codec Status
5.SIP.conf and extension.conf information.
Rgds
Mesbah
On 5/19/10, Deepika Nijhawan wrote:
>
> Hi,
>
>
>
> I dis
Hi,
It seems your configuration is correct .
1.Still you face the audio problem or not ?
2. Did you install libss7 while there was libpri installed
or a Fresh installation of the server .
3. in chan_dahdi.conf echocancel and echocancelwhenbridged=yes
=yes if you uncomment echocanceller=m
Hi,
Now Your ss7 link is up . Problem is on the audio. And previously there
was libpri installed.
A fresh installation of OS and asterisk ,dahdi and libss7 may solve the
problem .
Another a little try you can do that is uninstallation of libpri though it
does not make any sense.
Rgds
Hi,
Do you still face the same problem ?
Please post your chan_dahdi and extension.conf file. Generally this
happen due to group mismatch or overhit .
It seems your 2 T1 is in different group .
Thanks
Mesbah
On 5/20/10, Dave George wrote:
>
> I am getting the following error when my
tension.conf*
>
> [wholesale]
>
> exten => _1473.,1,Dial(DAHDI/G1/${EXTEN:1})
>
> exten => _1473.,n,Hangup
>
>
>
>
>
>
>
> Thanks,
>
> Dave George
>
> Teletone Inc.
>
> 561 674 3838
>
>
>
> *From:* asterisk-ss7-boun..
Coding Standard: 0
>Location: 0
>Cause Class: 1
>Cause Subclass: 0
>Cause: Normal call clearing (16)
>[ 02 80 90 ]
>
> Len = 14 [ f5 98 0b b5 00 a3 01 01 9d 02
t; > Subject: Re: [asterisk-ss7] app_dial.c:1518 dial_exec_full: Unable to
> > create channel of type 'DAHDI'
> > From: Mesbahuddin Malik
> > Date: Fri, May 21, 2010 6:00 am
> > To: asterisk-ss7@lists.digium.com
> >
> >
> >Hi,
> >
Hi,
Please provide some information.
1. What is the server configuration and OS u used ?\
2. IRQ of the PCI cards
3.what version of asterisk,ss7 and dahdi u have installed ?
4.CPU usage and dmesg while it gets hanged
Rgds
Mesbah
2010/5/23 Suhaib Mehyar
>
>
> Dears,
>
>
>
>
> lets say i hav
Hi,
As you are working on SS7 so you need not PRI to be installed. Check the
Trixbox ss7 version weather it is fit for you or not .
Rgds
Mesbah
On Sun, May 23, 2010 at 5:47 PM, Geoffrey Yeoh wrote:
> I have a project in which I need to do the following - Install two
> trixbox server with San
Hi,
is this a fresh installation or on the existing system u are trying still ?
Rgds
Mesbah
On Mon, May 24, 2010 at 5:50 AM, Deepika Nijhawan <
deepika.cho...@oxygen8.com> wrote:
> Hi,
>
>
>
> I tried installing libss7 version at
> https://observer.router.hu/repos_pub/libss7/trunk/. But, whe
Hi,
Paste your system.conf and chan_dahdi.conf here.
Thanks
Mesbah
On Tue, Jul 6, 2010 at 12:21 AM, Muriel Arneiro wrote:
> Hello!
>
> I'm integrate a DSX100 SP Tel with Asterisk 1.6.2 + libss7 version: 1.0.2.
>
> But, I have some troubles:
>
> 1 - Second E1 has a CIC begin 33, but DAHDI doe
Hi,
All those are the parts of SS7 . If it is ITU ss7 then it will be
easier for you . If it is ANSI SS7 need little bit work hard.
Thanks
Mesbah
On Sun, Nov 14, 2010 at 10:13 PM, Muwazi Daniel wrote:
> Hi all, I hope am addressing this to the correct forum cause the last
> thing
31 matches
Mail list logo
