Hi
It would be used by limitations in hardware of the machines. We chose for
another solution and this topology will not be used. I tried using cluster,
but i'm not understanding exactly how it works. Do you have any example of
cluster and an example of application of?
Thank's
2016-07-15 13:08
the MTP3 routing label does not contain host name unless you use the mtp3d
daemon. if not i think when the telco will want to reply it can be confused
at certain time
2016-07-15 16:08 GMT+00:00 Mesbahuddin Malik :
> Can u plz expalin why do u want to use same point code on two machines?
> Do You
Can u plz expalin why do u want to use same point code on two machines? Do
You want to implement clustering ?
So Far my understating Point Code its Unique Identifier.
Rgds
Mesbah
On Fri, Jul 15, 2016 at 5:43 AM, Rafael dos Santos Saraiva <
rafaels...@gmail.com> wrote:
> Hi
>
> Thanks for you
use chan_ss7 with mtp3d service and ask telco guys to establish ss7 link on
2 signlaning channels with the same point code for redundancy,.
run mtp3d demon on both servers.
[link-l1]
linkset => g0
channels => 2-31
schannel => 1@ss7link1:11999
firstcic => 289
enabled => yes
sltm => no
sls => 0
You can use same point code from telco side but your end need different
point code in libss7.
On Fri, Jul 15, 2016 at 5:44 AM, Rafael dos Santos Saraiva <
rafaels...@gmail.com> wrote:
> My scenario: https://s32.postimg.org/jybtpsdr9/same_opc.png
>
>
> 2016-07-14 5:37 GMT-03:00 Mesbahuddin Malik
My scenario: https://s32.postimg.org/jybtpsdr9/same_opc.png
2016-07-14 5:37 GMT-03:00 Mesbahuddin Malik :
> Hello,
> Chan_ss7 can according to your requirement. Please read the examples
> provided by chan_ss7 with multple point codes.
>
> Regards
> Mesbah
>
> On Thu, Jul 14, 2016 at 8:23 AM, Ra
Hi
Thanks for your reply.
My problem is use the same point code in two hosts. The example in chan_ss7
is about use multiple pointcodes in one host.
2016-07-14 5:37 GMT-03:00 Mesbahuddin Malik :
> Hello,
> Chan_ss7 can according to your requirement. Please read the examples
> provided by chan_ss
Hello,
Chan_ss7 can according to your requirement. Please read the examples
provided by chan_ss7 with multple point codes.
Regards
Mesbah
On Thu, Jul 14, 2016 at 8:23 AM, Rafael dos Santos Saraiva <
rafaels...@gmail.com> wrote:
> Hi there
>
> My scenario is the follow:
>
> My pointcode is 3500,
