> Devices currently active:
> wanpipe1 wanpipe2
>
>
> Wanpipe Config:
>
> Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud
> rate |
> wanpipe1| N/A | A101/1D/A102/2D/4/4D/8| 233 | 1 | 1|
> N/A | 0 |
> wanpipe2| N/A
Ruddy Gbaguidi wrote:
> Hi All
> I have to setup an ss7 link with the telco but they are not seeing any
> signal from my side.
>
> Behind the digium card the light is GREEN however. Is there anything I'm
> missing here ?
> Here is are my configuration.
You can also try using the ss7linktest pro
hi
first you set your pointcode and dpc currect . this is main problem on link
u got the signalling..
On 1/12/09, Ruddy Gbaguidi wrote:
>
> Hi All
> I have to setup an ss7 link with the telco but they are not seeing any
> signal from my side.
>
> Behind the digium card the light
Are they seeing physical DS1 signal or just no SS7 signaling? If this
is US ANSI check to see if they are looking for 56k.
On Jan 12, 2009, at 12:27 AM, Ruddy Gbaguidi wrote:
> Hi All
> I have to setup an ss7 link with the telco but they are not seeing any
> signal from my side.
>
> Behind the
Sriram wrote:
> I am establishing a SS7 link for first timemy operator has given
> me my point code ..but in the configuration file i find parameters like
> adjpointcode and defaultdpc ..which i know are operator's point code - w
>
> 1.will i have to definitely talk to him and get those ?
