Lond_IP wrote:
> Hello Matthew!
>
> Are you really sure that is TUP?
That's the userpart specified listed on the messages you posted.
> These packages have been received from NEC NEAX 2000IPS through E1 cards,
> which are used to connect NEAX-to-NEAX with protocol CCIS (this is a
> NEC-specifi
Hi
use latest libss7 (libss7-1.0.2) and check the line RX TX
coming or not.
also use current DPC for ss7 link up.
On Wed, Mar 17, 2010 at 12:58 AM, Lond_IP wrote:
> Hi!
>
> I have problem with ss7 link.
> Not in up mode.
>
> * 1.6.2.5 + DAHDI 2.2.1/2.2.1 + libSS7 1.0.1 + Digium
Take a look on this:
> Len = 10 [ ff 80 07 84 42 80 00 10 00 77 ]
in "Link state change: PROVING -> ALIGNEDREADY".
The 4 of 84 means TUP, not ISUP. When you see 85, you're ok.
On 16 Mar 2010, at 17:28, Lond_IP wrote:
> Hi!
>
> I have problem with ss7 link.
> Not in up mode.
>
> * 1.6.2.5
Lond_IP wrote:
> Hi!
>
> I have problem with ss7 link.
> Not in up mode.
The other end is sending you messages for TUP (user part 4), instead of
ISUP. libss7 right now only supports ISUP for bearer control, and not TUP.
Matthew Fredrickson
Digium, Inc.
>
> * 1.6.2.5 + DAHDI 2.2.1/2.2.1 + lib
Hi!
I have problem with ss7 link.
Not in up mode.
* 1.6.2.5 + DAHDI 2.2.1/2.2.1 + libSS7 1.0.1 + Digium TE121 <--> NEC NEAX
2000IPS
--
/etc/dahdi/system.conf:
span=1,0,0,ccs,hdb3,crc4
bchan=1-15
mtp2=16
echocanceller=mg2,1-15
loadzone= us
defaultzone = us
--
