You need to be sure first the CIC mapping in your Asterisk side is the same
as on your telco side.
Try one call and verify if the busy channel in your side is the same as in
your Telco Trunk Group side.
To see the CIC used in your side use this: "ss7 debug linkset x" and in the
trace verify the C
x0 ]
> >>> Unhandled optional parameter 0x31 'Propagation Delay Counter'
> >>> [0x0 0x64 ]
> >>> Unhandled optional parameter 0x3a 'Unknown'
> >>> [0x44 0x5 0x95 0x0 0x0 0x0 ]
> >>> Unhandled optional parameter 0x3f 'L
ard call indicator'
>>>> [0x0 ]
>>>> Unhandled optional parameter 0x31 'Propagation Delay Counter'
>>>> [0x0 0x64 ]
>>>> Unhandled optional parameter 0x3a 'Unknown'
>>>> [0x44 0x5 0x95 0x0 0x0 0x0 ]
>>>> Unhandled op
r 0x39 'Parameter Compatibility
>>> Information'
>>> [0x31 0xd0 0x3a 0xd0 0x3f 0xc0 ]
>>> Len = 16 [ 96 98 0d 85 c4 49 79 f2 5f 00 0c 02 00 02 81 81 ]
>>> FSN: 24 FIB 1
>>> BSN: 22 BIB 1
>>>> [1] MSU
>>> [ 96 98 0d
>>>
>&g
I assume ouccered by the missing p->dialing = 0; in chan_dahdi near
p->proceeding = 1; in case ISUP_EVENT_ACM: and case ISUP_EVENT_CPG:.
I wrote about it in many times in this list.
On Fri, 2009-09-18 at 11:41 +0530, Rajesh Mahajan wrote:
> Hi All.
>
> We are using Sangoma A104u Quad Card for SS
rajesh:
use dahdi_monitor to see if the voice is actually going out on the
particular channel
or one above or below it, as its probably just a cic mismatch
-wasim
On Fri, Sep 18, 2009 at 12:11 PM, Rajesh Mahajan
wrote:
> Hi All.
>
> We are using Sangoma A104u Quad Card for SS7.
>
> Incoming ca
Hi All.
We are using Sangoma A104u Quad Card for SS7.
Incoming call is working fine.
While in outbound call is working fine but not able to hear voice on
the channel.
Below is the config files
chan_dahdi.conf
[channels]
;switchtype=euroisdn
usecallerid=yes
callwaiting=yes
usecallingpres=yes
c
