i think they only exist for 'team/mattf/bug13495' branch
you may find the changes to revision 161488 here:
http://svnview.digium.com/svn/asterisk?view=revision&revision=161488
and the relevant change to libss7 in revision 230 here:
http://svnview.digium.com/svn/libss7?view=revision&revision=230
On 2010-09-02 14:49, Kaloyan Kovachev wrote:
> check if your chan_dahdi.c supports setting slc at all. It should be in
> function process_dahdi just after ss7type
>
> On Thu, 2 Sep 2010 07:37:05 -0500, Stephan Ellis
> wrote:
>> I am not sure about the difference of what Bipin sent, except for the
All,
I've grabbed the patches as Gustavo suggested. I can now set the SLC on the
second asterisk box, but the link keeps flapping. I am going to schedule
some time with our Siemens guy to run a trace on the Siemens side.
Was I clear that I have two Asterisk boxes, each with one F link of the
li
Hi,
check your link if it is ok then go to RND because i am using
lots of ss7 connection and its work fine .
On Thu, Sep 2, 2010 at 6:07 PM, Stephan Ellis wrote:
> I am not sure about the difference of what Bipin sent, except for the
> order and apparent removal of directives. I tri
check if your chan_dahdi.c supports setting slc at all. It should be in
function process_dahdi just after ss7type
On Thu, 2 Sep 2010 07:37:05 -0500, Stephan Ellis
wrote:
> I am not sure about the difference of what Bipin sent, except for the
> order
> and apparent removal of directives. I tried
I am not sure about the difference of what Bipin sent, except for the order
and apparent removal of directives. I tried changing the order of the
directives in chan_dahdi.conf, but it had no effect. It still flaps and
says SLC (0)
Any other ideas?
thanks!
-stephan
On Thu, Sep 2, 2010 at 1:36
Try this
linkset=1
pointcode=1-1-1
adjpointcode=5-9-192
defaultdpc=5-9-192
sigchan=1
cicbeginswith=1
channel=2-24
On Thu, Sep 2, 2010 at 2:27 AM, Stephan Ellis wrote:
> Hell All,
>
> I am using:
> Asterisk 1.6.2.10
> Libss7 1.0.2
> Latest DAHDI and Wanpipe from Sangoma
>
> I two T1's from the Sie
Hell All,
I am using:
Asterisk 1.6.2.10
Libss7 1.0.2
Latest DAHDI and Wanpipe from Sangoma
I two T1's from the Siemens each with an F link connected to two different
T1. Our Siemens guy is telling us that we need to set the Link Code on the
second box to 1. I set slc=1 in chan_dahdi.conf on the
