Congratulations !!!
On Fri, Aug 12, 2011 at 7:39 PM, equis software wrote:
> Thanks Abdul !!
>
> This cnfiguration is working...
>
>
> [linkset-siuc]
> enabled=>yes
> enable_st=>no
> use_connect=>no
> hunting_policy=>seq_lth
> language=>br
> subservice=>8
>
> [link-i1]
> linkset=>siuc
> channels=
Thanks Abdul !!
This cnfiguration is working...
[linkset-siuc]
enabled=>yes
enable_st=>no
use_connect=>no
hunting_policy=>seq_lth
language=>br
subservice=>8
[link-i1]
linkset=>siuc
channels=>1-15,17-31
schannel=>16
firstcic=>1
enabled=>yes
echocancel=>allways
sltm=>no
[link-i2]
linkset=>siuc
ch
Hi ,
Youre Tx Rx ok on span2 ?
On Wed, Aug 10, 2011 at 8:45 PM, Abdul Basit wrote:
> try following
>
> On Wed, Aug 10, 2011 at 7:45 PM, equis software
> wrote:
>
>> Hi, I want to configure 2 span (with digium TE210) ss7 signaling, with
>> only one link.
>> With one span, this wor
I try this but this message is in my console...
[Aug 10 15:25:28] WARNING[27922]: l4isup.c:4966 l4isup_event: Received
CIC=48 for unequipped circuit (typ=RSC), link 'i1'.
[Aug 10 15:25:28] NOTICE[27922]: l4isup.c:4954 l4isup_event: ISUP decoding
error, message discarded. (typ=47)
On Wed, Aug 10
try following
On Wed, Aug 10, 2011 at 7:45 PM, equis software wrote:
> Hi, I want to configure 2 span (with digium TE210) ss7 signaling, with only
> one link.
> With one span, this work very well with this configuration...
>
> system.conf
>
> span=1,2,0,ccs,hdb3
> bchan=1-15,17-31
> bchan=16
>
>
Hi, I want to configure 2 span (with digium TE210) ss7 signaling, with only
one link.
With one span, this work very well with this configuration...
system.conf
span=1,2,0,ccs,hdb3
bchan=1-15,17-31
bchan=16
in ss7.conf
[linkset-siuc]
enabled=>yes
enable_st=>no
use_connect=>no
hunting_policy=>seq
-mail id to my yahoo IM?
Kind regards,
Anwarul
> Date: Thu, 31 Dec 2009 09:12:08 -0800
> From: dpiza...@yahoo.com
> To: asterisk-ss7@lists.digium.com
> Subject: Re: [asterisk-ss7] SS7 Configuration
>
>
> Hi,
>
> I am glad that manual be usefull.
>
zarro
Infobox
--- El jue 31-dic-09, anwarul mamun escribió:
> De: anwarul mamun
> Asunto: Re: [asterisk-ss7] SS7 Configuration
> A: asterisk-ss7@lists.digium.com
> Fecha: jueves, 31 diciembre, 2009, 11:42 am
>
>
>
>
>
>
>
> Hi Daniel Pizarro,
>
>
&
?
Regards,
Babu
> Date: Wed, 23 Dec 2009 12:30:04 -0800
> From: dpiza...@yahoo.com
> To: asterisk-ss7@lists.digium.com
> Subject: Re: [asterisk-ss7] SS7 Configuration
>
> Hello,
>
> I think so. This is a manual about it.
>
> http://www.asterisk-p
Regards,
>
> Daniel Pizarro
>
> --- El lun 21-dic-09, Goke M Aruna escribió:
>
> > De: Goke M Aruna
> > Asunto: Re: [asterisk-ss7] SS7 Configuration
> > A: asterisk-ss7@lists.digium.com
> > Fecha: lunes, 21 diciembre, 2009, 12:20 am
> > Anwar,
> >
>
Hello,
I think so. This is a manual about it.
http://www.asterisk-peru.com/node/1800
Regards,
Daniel Pizarro
--- El lun 21-dic-09, Goke M Aruna escribió:
> De: Goke M Aruna
> Asunto: Re: [asterisk-ss7] SS7 Configuration
> A: asterisk-ss7@lists.digium.com
> Fecha: lunes, 21 dic
Anwar,
Use chan_ss7. It will be easier from my own opinion.
Goksie
On 12/19/09, anwarul mamun wrote:
>
>
>
> Hi,
>
>
>
> I want to configure a voip gateway using asterisk and digium E1 card. The
> inbound call is through internet and those call will be terminated using E1
> through ss7 link.
>
Hi
use libss7 its good .
On Sat, Dec 19, 2009 at 12:33 PM, anwarul mamun wrote:
>
> Hi,
>
> I want to configure a voip gateway using asterisk and digium E1 card.
> The inbound call is through internet and those call will be terminated using
> E1 through ss7 link.
>
> Can someone please
On Dec 19, 2009, at 2:03 AM, anwarul mamun wrote:
> I want to configure a voip gateway using asterisk and digium E1 card. The
> inbound call is through internet and those call will be terminated using E1
> through ss7 link.
>
> Can someone please suggest the configuration steps i should follo
Hi,
I want to configure a voip gateway using asterisk and digium E1 card. The
inbound call is through internet and those call will be terminated using E1
through ss7 link.
Can someone please suggest the configuration steps i should follow in this
scenario? Which one is best to conf
: Gobinda Paul
Date: Thu, 14 May 2009 11:37:09
To:
Subject: [asterisk-ss7] SS7 configuration Problem Asterisk-1.6.0.9
___
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-ss7 mailing list
To UNSUBSCRIBE or update opti
hi,
Can Any One Help Me To Figure Out This Problem?
My SS7 link is working properly , i test with
./ss7linktest 1 itu 3924 9322
But in asterisk , while i am trying to dial , i got error code 34,
i already talk with telco they ensure me, my link is ok and they
didn't get any kind of d
17 matches
Mail list logo
