Thx Matthew,
I found the problem, it was the loadzone...
Setting loadzone to fr arranged the problem.
Thanks anyway.
Olivier
Matthew Fredrickson a écrit :
> olivier taylor wrote:
>> Hello list,
>>
>> Using asterisk SVN-trunk-r172441
>> ibss7 SVN-trunk-r251
&g
Hello list,
Using asterisk SVN-trunk-r172441
ibss7 SVN-trunk-r251
dahdi SVN-trunk-r5895 Echo Canceller: MG2
Everything is up dand running, but I am unable to send out the dtmf tones...
Any Idea?
Olivier
Dahdi config
span=1,0,0,ccs,hdb3
bchan=1-15
mtp2=16
bchan=17-31
chan_dahdi
[channe
http://downloads.digium.com/pub/telephony/libss7/releases/
Olivier
Antoine Megalla a écrit :
Hi,
I have been using chan_ss7 for the
past 2 years, and now I would like to try LibSS7 since it is matured in
a release version.
My question is:
Where can I find the LibSS7
Hello,
last svn versions of asterisk, libss7 and dahdi.
I quite often have this message, after that the channel is hungup, any idea?
Regards,
Olivier
[Sep 25 12:30:28] ERROR[2931]: chan_dahdi.c:10048 dahdi_ss7_error: !!
Unable to handle message of type 0xd on CIC 11
well,
I have an installation with the latest trunk of dahdi/libss7/asterisk,
no problems like yours, only a bloody echo since dahdi replaces zaptel.
Fyi, it's installed on Centos 5.x, maybe that's a way to go.
I have 3 servers working for now, 2 with a TE110 and one with TE210.
Olivier
Srira
hi,
just to know, why Zaptel and not dadhi?
any problems?
Olivier
Tom Chandler a écrit :
Is there still a comination of
zaptel/libss7/asterisk that can be used
instead of the dahdi configuration.
If so, could the links be provided.
Thank You
Tom C.
___
lec)to
be working ok, however I get very bad consistent echo regardless of the choice
of echo-canceller ...
and from the SS7 list
Same here,
dahdi make terrible echo...
Kind regards,
Olivier
Matthew Fredrickson a écrit :
> olivier taylor wrote:
>> Matthew, other subject, ok
>>
Matthew, other subject, ok
Any idea on how to get the las version of asterisk working with zaptel?
Dahdi echo akes it unusable :(
Kind regards,
Olivier
Matthew Fredrickson a écrit :
Sriram wrote:
Hi
output of ss7linktest :
Could not open device 16 : Device or resource busy
/9/16 olivier taylor <[EMAIL PROTECTED]>:
hi,
is there a way to go back to a zaptel version of asterisk and libss7?
Dahdi cause many troubles with echo...
And I didn't save the versions I used before...
Same here,
dahdi make terrible echo...
in zaptel setup there is
hi,
is there a way to go back to a zaptel version of asterisk and libss7?
Dahdi cause many troubles with echo...
And I didn't save the versions I used before...
Olivier
___
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asteris
écrit :
> olivier taylor wrote:
>> what do you mean by a better software echo canceller?
>> I use the standard one in dahdi, wich is better?
>> Oslec doesn't seems available for dahdi.
>
> OSLEC was what I was thinking of... although whether or not there is a
> pa
erisk, libss7, and dahdi.
Since, I have echo problem I didn't had before.
Olivier
Matthew Fredrickson a écrit :
> olivier taylor wrote:
>> echocancel is set, the exact message is :
>
> Ok, this means that you either need to try to use a different/better
> software echo ca
128 taps
currently ON
CIC: 2
Actual Confinfo: Num/0, Mode/0x
Actual Confmute: No
Hookstate (FXS only): Onhook
Matthew Fredrickson a écrit :
> olivier taylor wrote:
>>
>>
>> Matthew Fredrickson a écrit :Well, I am quite happy with libss7, no
>> real reasons to
Matthew Fredrickson a écrit :Well, I am quite happy with libss7, no
real reasons to change for me.
But, I can't be sure and this is another problem, since I use
chan_dadhi, I have big echo problems, it wans't the case with zaptel.
I am buying E1 cards with hardware echo canceller to avoid thi
Zaptel needed to be patched to use Oslec, I must suppose it's the same
for Dahdi.
Olivier
Anton a écrit :
Use OSLEC - others just sux in comparision to OSLEC.
On Tuesday 09 September 2008 15:08, olivier taylor wrote:
Ok,
another question.
They are many possibilities for
27;s and E1's.
Chan_ss7 is only for E1's so far.
-Mark
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of
olivier taylor
Sent: Monday, September 08, 2008 3:13 PM
To: asterisk-ss7@lists.digium.com
Subject: [asterisk-ss7] why
Just a q
Just a question
Why libss7 and chan_SS7
where is the difference and why 2 different accesses to SS7?
Olivier
ps:For myself, I use libss7 and I am happy with it(incoming and
outgoing, thousands of calls).
___
--Bandwidth and Colocation Provided by ht
Hi Matthew,
No problem, it works, problem was coming from my provider.
Regards,
Olivier
Matthew Fredrickson a écrit :
> olivier taylor wrote:
>> Since yesterday, we experience echo problems.
>> Not sure that's SS7 side but I'd like to know how to know if Echo
>>
Since yesterday, we experience echo problems.
Not sure that's SS7 side but I'd like to know how to know if Echo
Canceller is activated or not.
Using Asterisk SVN-trunk-r136349, libss7-trunk and chan-dahdi.
Kind regards,
Olivier
___
--Bandwidth and Co
and the default point code as
traffic is only going in his direction ?
On Thu, 14 Aug 2008 18:17:12 +0200, olivier
taylor wrote
> Your provider should give you 3 informations.
>
> His pointcode (adjacent pointcode in your config)
> Your pointcode (pointcode in your conf
Your provider should give you 3 informations.
His pointcode (adjacent pointcode in your config)
Your pointcode (pointcode in your config)
and eventually a default pointcode if they are other hops between you
and him (usually you will use the adjacent pointcode).
Maybe, we can say that it work
Rc1 ? ;)
Some problems I must suppose.
olivier taylor a écrit :
> Hello again,
>
> when starting asterisk, I get :
>
> ERROR[19130]: codec_dahdi.c:398 find_transcoders: Failed to open
> /dev/dahdi/transcode: No such file or directory
>
>
Hello again,
when starting asterisk, I get :
ERROR[19130]: codec_dahdi.c:398 find_transcoders: Failed to open
/dev/dahdi/transcode: No such file or directory
any idea?
Olivier
___
--Bandwidth and Colocation Provided by http://www.api-digital.com--
a.so' could
not be loaded.
Using asterisk trunk
Kind regards,
Olivier
Kevin P. Fleming a écrit :
olivier taylor wrote:
I have two servers installed with the latest SS7 rellease (asterisk
1.6.0 and chan_dahdi).
You mean Asterisk 1.6.0-beta9 or an SVN snapshot, since As
Nice to hear, I am quite impatient :)
Kind regards and thanks to all for the help/suggestions
Olivier
Kevin P. Fleming a écrit :
olivier taylor wrote:
I have two servers installed with the latest SS7 rellease (asterisk
1.6.0 and chan_dahdi).
You mean Asterisk 1.6.0
rsday 07 August 2008 11:21, olivier taylor wrote:
Hello all,
I have two servers installed with the latest SS7
rellease (asterisk 1.6.0 and chan_dahdi).
It works perfectly, thanks to the list.
But now, I need to install G729 on these servers but
digium claim that they does not
Hello all,
I have two servers installed with the latest SS7 rellease (asterisk
1.6.0 and chan_dahdi).
It works perfectly, thanks to the list.
But now, I need to install G729 on these servers but digium claim that
they does not provide binaries nor support G729 on asterisk 1.6
Any idea is wel
/etc/system/dahdi.conf doesn't exist on my server...
Olivier
Matthew Fredrickson a écrit :
> olivier taylor wrote:
>> Okido, it works perfectly again, Thx Matthew, you are the source for
>> SS7.
> If you're using a Digium card, you might change your dchan= lin
Okido, it works perfectly again, Thx Matthew, you are the source for SS7.
Best regards,
Olivier
Matthew Fredrickson a écrit :
> olivier taylor wrote:
>> Okido, I have then to uninstall zaptel?
>>
>> For dahdi, it's installed, but I am lost with the configurations f
annels 17-31
sigchan = 16 ; This is where you declare which Zap channel is
your signalling
Joseph a écrit :
On 08/01/08, olivier taylor wrote:
Hi all,
Installed :
dahdi-complete
zaptel 1.4.11
libss7-trunk
When compiling libss7, I get :
gcc -g -o ss7linktest ss7linktest.
Hi all,
Installed :
dahdi-complete
zaptel 1.4.11
libss7-trunk
When compiling libss7, I get :
gcc -g -o ss7linktest ss7linktest.c libss7.a -lpthread
ss7linktest.c: In function ‘zap_open’:
ss7linktest.c:200: error: ‘DAHDI_BUFFERINFO’ undeclared (first use in
this function)
ss7linktest.c:200: error:
yum install subversion
il faudrait que tu utilises un peu Google :)
Tu sembles néophite en matière de Linux, je me trompe?
Elkhomeini a écrit :
bonjour,
tu peux m'indiquer pour installer SVN sur mon fedora core ?
olivier taylor <[EMAIL PROTECTED]> a écrit :
A
pr
A priori, tu es francophone, je peux peut-être t'aider pour installer
ton serveur SS7.
Olivier
Elkhomeini a écrit :
> Hi;
> I have somes problems with svn co commande ;
>
> how I can download libss7 by wget ?
> I have now asterisk and zaptel but libss7 ?
> can you help me
>
> OUL
all know, trying to create something new always takes time
and you have to work on many layers. Website is one layer. SS7 links is
an other layer that I am taking care of. Hope you can help me with that.
On Mon, May 5, 2008 at 5:12 PM, olivier
taylor <[EMAIL PROTECTED]> w
r the questions above. If
something is not clear enough, please ask. I would be happy to provide
you with all the answers.
--
Best Regards,
Andrew Rose, VP BizDev.
NiftyCell SA, http://www.niftycell.com
On Fri, May 2, 2008 at 11:01 AM, olivier
taylor <[EMAIL PROTECTED]> w
.
But ok, I am ready to prepare a basic documentation, not only recipes
and howtos, just an explanation on what SS7 is.
I must suppose you will correct me if I miss somewhere.
Kind regards,
Olivier
Joseph a écrit :
On 04/21/08, olivier taylor wrote:
well, ok,
I did post noob questio
well, ok,
I did post noob questions on the list(with no answers...)
In fact, it's quite impossible to find explanation on how SS7 works on
the net, all the informations are related to experts, no informations
about the basics of SS7.
It seems I have understood how it works now, hundred of succe
Hello all,
Another question:
Is it possible to dynamically change the networkindicator to
international or national?
If yes, what is the command to be used in the dialplan?
Kind regards,
Olivier
___
--Bandwidth and Colocation Provided by http://www
re,
I also need clarification about pointcode(s)
Pointcode is OK, but what are adjpointcode and defaultdpc?
Is it mandatory to have values for these entries?
The provider gave me only the pointcode in the form '2-8001', I have
tranformed it to 8001 and it's ok.
Thanks,
Olivier
h ssè :)
Olivier
olivier taylor a écrit :
> Well,
>
> maybe it's not q question for the ss7 list, but.
>
> Installed asterisk, libpri, zaptel,... trunk
>
> Parameters seems ok for asterisk and ss7, linkset is ok
>
> Problem is astersik doesn't matter about the
Well,
maybe it's not q question for the ss7 list, but.
Installed asterisk, libpri, zaptel,... trunk
Parameters seems ok for asterisk and ss7, linkset is ok
Problem is astersik doesn't matter about the sip messages sent to him,
Ngrep see the messages on port 5060 but astersik doesn't react...
E
Hello all,
I have to prepare an asterisk with two TE110P.
I am a fan of freebsd but I'd like to know is Freebsd is a good idea?
What's for you the best Unix/linux for having an os with no
compatibility problems?
Also, as I see, we have to possibilities about SS7, Chanss7 and LibSS7,
wich is the
42 matches
Mail list logo
