On 2017-04-17 19:29, Mark Kettenis wrote:
From: Tuyosi T
Date: Tue, 18 Apr 2017 03:02:04 +0900
how about odroid ?
The Odroid-XU4, and almost certainly the Odroid-XU3 use a Samsung
Exynos5 SoC and are supported by OpenBSD/armv7. Only USB works, but
the onboard ethernet is ure(4), so that work
On 2017/04/18 05:54, Tuyosi T wrote:
> surely now state Rpi3 cannot install lftp by ports ,
lftp works fine on aarch64. Install a snapshot, pkg_add lftp.
Thank MARK for the clear explanation .
i can use raspberry pi 3 's openbsd as ssh server and http server .
That's enough because i think server shoud not run X .
( a special sata-usb converter works well , so big space is OK )
surely now state Rpi3 cannot install lftp by ports ,
but by using sf
> From: Tuyosi T
> Date: Tue, 18 Apr 2017 03:02:04 +0900
>
> how about odroid ?
The Odroid-XU4, and almost certainly the Odroid-XU3 use a Samsung
Exynos5 SoC and are supported by OpenBSD/armv7. Only USB works, but
the onboard ethernet is ure(4), so that works as well. You need a
closed-source
thanks for good information .
how about odroid ?
--
The ODROID means Open + Android.
It is a development platform with hardware as well as software.
> From: Laurence Rochfort
> Date: Sat, 15 Apr 2017 05:45:50 +
>
> How have the closed blob issues been overcome? I believed they were a
> blocker for support of the Pi?
It's never been a blocking issue.
The firmware that runs on the graphics core of the Pi is
closed-source. This isn't real
Hi all .
if we use proper SATA-USB converter cable .
we can use arm as server .
in fact
# df
Filesystem 512-blocks Used Avail Capacity Mounted on
/dev/sd0a 2057756 86744 1868128 4%/
/dev/sd0l24770826836 235322820 0%/home
about 120GB
/dev/sd0d
i have no skill of programming .
i only pick a gold coin in the deapth of big lake .
---
regards
there is a very good reading at
http://www.undeadly.org/cgi?action=article&sid=20170409123528&mode=flat%20%EF%BF%BC
Tl;dr
How have the closed blob issues been overcome? I believed they were a
blocker for support of the Pi?
Hi !
there is a very good reading at
http://www.undeadly.org/cgi?action=article&sid=20170409123528&mode=flat%20%EF%BF%BC
.
i only follow it .
sd card A USB card reader :Rpi3:micro sd card B in it's slot
at this state , i install openbsd into sd0 ( namely sd card A)
and reboot
at this state is
again i fail .
but someone can solve it .
i think micro SD in sd slot as CD , and micro SD in USB card reader as hard
disk .
--
# minicom -s
Welcome to minicom 2.7
OPTIONS: I18n
Compiled on Sep 6 2015, 19:49:19.
Port /dev/ttyUSB0, 11:52:24
Press CTRL-A Z for help on special keys
On Sat, Apr 08, 2017 at 11:10:09AM +0900, Tuyosi T wrote:
> i failed
> details is next
>
> -
> Err: lcd
>
> Net: Net Initialization Skipped
>
> No ethernet found.
>
> starting USB...
>
> USB0: Core Release: 2.80a
>
> scanning bus 0 for devices...
>
>
i failed
details is next
-
Err: lcd
Net: Net Initialization Skipped
No ethernet found.
starting USB...
USB0: Core Release: 2.80a
scanning bus 0 for devices...
USB device not accepting new address (error=0)
3 USB Device(s) found
scanning us
On Sat, Apr 08, 2017 at 10:11:53AM +0900, Tuyosi T wrote:
> hi all .
>
> i try again to install arm to raspberry pi 3 .
> i use miniroot61.fs of 6th april version .
>
> insert micro sd card(S1) with usb card reader(which has micro sd card(S2)).
>
>
> at the end of installing
> -
hi all .
i try again to install arm to raspberry pi 3 .
i use miniroot61.fs of 6th april version .
insert micro sd card(S1) with usb card reader(which has micro sd card(S2)).
at the end of installing
>
Set name(s)? (or 'abort' or 'done') [done]
Get/Verify SHA256.sig 1
15 matches
Mail list logo
