On 10/27/09, Javier Vasquez wrote:
> Hi,
>
> Usually I set the following:
>
>Option "XkbLayout" "latam,us"
>Option "XkbOptions" "lv3:ralt_switch, grp:alt_shift_toggle"
>
Just a follow up to close this
On 12/15/09, Ionut Biru wrote:
> On 12/15/2009 09:19 PM, Arvid Picciani wrote:
>> On 12/15/2009 07:37 AM, Jürgen Hagemann wrote:
...
> thunderbird-3.0-3 has no gnomeui, no lightning.
>
> --
> Ionut
And is this good? The lightning XPI doesn't work for x86_64, the
lightning in AUR doesn't work
On 12/18/09, Magnus Therning wrote:
> On Thu, Dec 17, 2009 at 5:28 PM, Javier Vasquez
> wrote:
>> On 12/15/09, Ionut Biru wrote:
>>> On 12/15/2009 09:19 PM, Arvid Picciani wrote:
>>>> On 12/15/2009 07:37 AM, Jürgen Hagemann wrote:
>>
>> ...
>>
Hi,
Some time back, while xscreensver was running the system got locked,
so that I couldn't log back neither under X, neither under the
console. The only solution at hand was to do a hard reset. After
such hard reset, the partition for /tmp got corrupted and it had to be
repaired.
However ever
On 1/17/10, Xavier Chantry wrote:
> On Sun, Jan 17, 2010 at 6:51 PM, Ray Rashif wrote:
>>
>> Often times it's the user configuration files that mess up a system,
>> so keep that in mind unless you're really confident it's all in the
>> packages themselves.
>>
>> And if you're thinking of reinstal
Hi all,
I have 4 boxes, all with the same partitioning scheme and using ext4
for all of them. This weird thing has only showed up in one of them.
Some time back while playing some video and with xscreensaver active,
the timeout for xscreensaver expired and then password was required...
Bad thin
On 1/25/10, Xavier Chantry wrote:
> On Mon, Jan 25, 2010 at 4:36 PM, Thayer Williams wrote:
>> On Sun, Jan 24, 2010 at 7:14 PM, Javier Vasquez
>> wrote:
>>> Bad thing that xscreensaver corrupted / so that it couldn't be
>>> unlocked, and under console ther
On 1/25/10, Thayer Williams wrote:
> On Sun, Jan 24, 2010 at 7:14 PM, Javier Vasquez
> wrote:
>> Bad thing that xscreensaver corrupted / so that it couldn't be
>> unlocked, and under console there was no way to loging, some misplaced
>> inodes or something...
>&g
Hi all,
Previously I was having the following settings:
/etc/default/grub
--
GRUB_CMDLINE_LINUX_DEFAULT='resume=/dev/sda5'
grub.cfg
---
linux /vmlinuz26 root=/dev/sda7 ro resume=/dev/sda5
I have installed:
acpitool 0.5.1-1
kernel26 2.6.32.8-1
And fro quiet a lon
On 2/19/10, Thomas Bächler wrote:
> Am 19.02.2010 16:40, schrieb Ray Kohler:
>> Add the "resume" hook to the end of the HOOKS list in
>> /etc/mkinitcpio.conf and rebuild your initramfs. This has to be added
>> manually now with the non-klibc mkinitcpio.
>
> Actually, all documentation I knew of al
On 1/25/10, Damjan Georgievski wrote:
>> Hmm, let me rephrase my initial statement. The only initial symptom
>> was xscreensaver. It was running when all of sudden the FS got
>> corrupted and I couldn't loging, not from xscreensaver, not from
>> console, etc.
>>
>> At this point I have a pretty
On 2/21/10, Xavier Chantry wrote:
> On Sun, Feb 21, 2010 at 9:59 PM, Javier Vasquez
> wrote:
>>
>> Bad thing it's still kind of unknown how to solve or to work around
>> it. Well, the work around is not to use xscreensaver, :-(. I don't
>> remember if
Hi,
Today's pacman -Syu installed new xorg-server package:
% pacman -Qs xorg-server
local/xorg-server 1.7.5.901-1 (xorg)
X.Org X servers
I have xorg.conf configured without hal support:
Section "ServerFlags"
Option "AutoAddDevices""False"
Option "AllowEmptyInput"
On 3/7/10, Thaddeus Nielsen wrote:
> Javier Vasquez [j.e.vasque...@gmail.com] wrote:
>> Hi,
>>
>> Today's pacman -Syu installed new xorg-server package:
>>
>> % pacman -Qs xorg-server
>> local/xorg-server 1.7.5.901-1 (xorg)
>> X.Org X ser
On 3/9/10, Guus Snijders wrote:
> On 07-03-10 21:57, Javier Vasquez wrote:
>> Hi,
>>
>> Today's pacman -Syu installed new xorg-server package:
>>
>> % pacman -Qs xorg-server
>> local/xorg-server 1.7.5.901-1 (xorg)
>> X.Org X servers
>
&
On 3/17/10, James Rayner wrote:
> On Wed, 17 Mar 2010 11:16 +0530, "Nilesh Govindarajan"
> wrote:
>>
>> I don't have seven mouse buttons.
>> The mouse and keyboard is already configured in xorg.conf using
>> drivers mouse and kbd.
>> If I stop hal, and then start Xorg, it doesn't work. I've to ha
Hi,
I have openoffice installed as well as lprng. Lprng used to work for
openoffice providing I believe "Generic Printer" or similar. Some
time back for it work under any gtk-2 application (like firefox) I had
to add to the gtkrc:
gtk-print-backends = "file,lpr,cups"
This is still working for
On 3/28/10, Javier Vasquez wrote:
> Hi,
>
> I have openoffice installed as well as lprng. Lprng used to work for
> openoffice providing I believe "Generic Printer" or similar. Some
> time back for it work under any gtk-2 application (like firefox) I had
> to add
On 5/20/10, Nilesh Govindarajan wrote:
> On 05/20/2010 10:00 PM, Dave Morgan wrote:
>>
>>
>> On 20 May 2010, at 17:26, Carlos Mennens wrote:
>>
>> How do I create a bootable install disk from an .ISO image I
>> downloaded from the Arch site? I would like to know how to do this via
>> CLI only rat
On 6/28/10, Dave Reisner wrote:
> On Mon, Jun 28, 2010 at 07:09:11PM -0300, Denis A. Altoé Falqueto wrote:
>> On Mon, Jun 28, 2010 at 5:52 PM, Philipp Überbacher
>> wrote:
>> > Actually I was recently wondering a bit about the unmounting part,
>> > especially with USB sticks. I do have udev rules
Hi,
I don't use d-bus much, since I don't use desktop environments and I
tend to use light and configured things like autofs, fluxbox itself
and the like.
On my x86-64 machine running under arch-linux, I tried starting dbus
sessions prior to executing fluxbox as follows:
dbuslaunch="`which dbus-
On 12/8/11, Thomas Bächler wrote:
> Am 08.12.2011 09:19, schrieb Ralf Mardorf:
>> Hi :)
>>
>> ...
>
> The problem here is that the 'eth0' interface is not up when pppd is
> launched. This would be easily solved by running
> ip link set eth0 up
> before launching pppd, but netcfg doesn't know that
On 1/3/12, Jonathan Vasquez wrote:
> On Tue, Jan 3, 2012 at 12:47 PM, Fabio Mancinelli
> wrote:
>>
>>
>> This fixed the redrawing issues but made my laptop start to freeze on
>> suspend (with the proprietary driver, suspend worked without any
>> issues)
>>
>> I looked at the log in /var/log/
On 1/3/12, C Anthony Risinger wrote:
> On Tue, Jan 3, 2012 at 2:46 PM, Jonathan Vasquez
> wrote:
>> On Tue, Jan 3, 2012 at 3:43 PM, Alex Ferrando wrote:
>>> On 03/01/12 21:25, Javier Vasquez wrote:
>>>>
>>>> % 'grep' resume /etc/mki
On 1/3/12, Javier Vasquez wrote:
> On 1/3/12, C Anthony Risinger wrote:
>> On Tue, Jan 3, 2012 at 2:46 PM, Jonathan Vasquez
>> wrote:
>>> On Tue, Jan 3, 2012 at 3:43 PM, Alex Ferrando
>>> wrote:
>>>> On 03/01/12 21:25, Javier Vasquez wrote:
>
On 1/3/12, Angel Velásquez wrote:
> ...
>
> OMG Javier did learn how to bottom-post!
>
> Congratulations \o/
>
> - --
> Angel Velásquez
I'm afraid the Javier you're referring to is another one, :-) I've
seen a more active Javier on the list. I participate way less since
though I have years usi
On 1/27/12, atilla ontas wrote:
> 2012/1/27 C Anthony Risinger :
>> On Fri, Jan 27, 2012 at 12:59 PM, Thanasis Georgiou
>> wrote:
>>> On 27 January 2012 20:37, Kwpolska wrote:
I bought a new PC. I'm going to get it a bit later, I need a plan for
data movement. I created this, can som
On 1/30/12, David C. Rankin wrote:
> Guys,
>
>It seems one of the latest updates did something to the little triangle
> thread markers in thunderbird that show when a thread has responses.
> ...
> what I'm seeing:
>
> http://www.3111skyline.com/dl/img/misc/tbird-triangles-arch.jpg
>
> --
> Dav
On Sun, Mar 18, 2012 at 6:28 AM, Jude DaShiell wrote:
> Track01 on dvd's always comes up with unknown length when trying to burn a
> dvd with wodim. That's out of two different containers of dvd's too.
> These dvd's are single-sided so no danger of blue ray being used here.
> Fortunately I can do
On Tue, Jun 5, 2012 at 2:23 PM, David C. Rankin
wrote:
> On 06/05/2012 03:16 PM, David C. Rankin wrote:
>>
>> So how do I rebuild the module manually in this case?
sudo /etc/rc.d/dkms restart.
>>
>> Also, since I don't really want the module autogenerated, do I even need
>> dkms in the DAEMONS
On Thu, Jun 7, 2012 at 1:04 PM, P .NIKOLIC wrote:
> Hi
>
> Just done a "pacman -Syu" i get the following error below
> ...
>
> Targets (6): filesystem-2012.6-2 git-1.7.10.4-1 icu-49.1.2-1
> krb5-1.10.2-1 libsystemd-185-1 systemd-tools-185-1
>
> ...
> 100% error: failed to commit transaction (c
Hi,
I've been using the original cdrecord (cdrtools) for more than 10
years now, however I hadn't burned anything in the last 3 months (or
even more). With the current linux kernel image from Arch:
% uname -a
Linux jvasquez14 3.3.8-1-ARCH #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST
2012 x86_64 GNU/Li
On Sat, Jun 9, 2012 at 11:24 PM, Jude DaShiell wrote:
> Your drive could need cleaning, or have worn out, or in some way have
> been disconnected. Those kind of drives have to be replaced every so
> often. If it's a usb drive, have you done a modprobe usbmass yet? If
> not, that may be all you
On Sat, Jun 9, 2012 at 11:51 PM, Javier Vasquez wrote:
> On Sat, Jun 9, 2012 at 11:24 PM, Jude DaShiell
> wrote:
>> Your drive could need cleaning, or have worn out, or in some way have
>> been disconnected. Those kind of drives have to be replaced every so
>> often. I
On Sun, Jun 10, 2012 at 1:34 AM, Lukáš Jirkovský wrote:
> On 10 June 2012 01:41, Javier Vasquez wrote:
>> Hi,
>>
>> I've been using the original cdrecord (cdrtools) for more than 10
>> years now, however I hadn't burned anything in the last 3 months (or
&
On Sun, Jun 10, 2012 at 11:42 AM, Mateusz Loskot wrote:
> Hi,
>
> I have been observing strange issues when I switch between X and TTY.
> Here is the step-by-step story with details:
>
> 0. Login to tty1 and ttt2
> 1. From tty2 (not tty1), startx with either i3wm or Openbox
> 2. Launch 2-3 apps (e
Hi,
I'm using a HP EliteBook 8540w laptop. It comes with following audio card:
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset
High Definition Audio (rev 05)
Subsystem: Hewlett-Packard Company Device 1521
Flags: bus master, fast devsel, latency 0, IRQ 54
On Sun, Jul 1, 2012 at 11:31 AM, Javier Vasquez wrote:
> Hi,
>
> I'm using a HP EliteBook 8540w laptop. It comes with following audio card:
>
> 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset
> High Definition Audio (rev 05)
> Subsyste
Hi,
I've tried building openjdk, but it has a make dependency upon
ca-certificates-java, and ca-certificates-jave also has a make
dependency upon openjdk:
http://projects.archlinux.org/svntogit/packages.git/plain/openjdk6/repos/extra-x86_64/PKGBUILD
http://projects.archlinux.org/svntogit/packages
On Mon, May 9, 2011 at 3:32 AM, Pierre Schmitz wrote:
> On Sun, 8 May 2011 18:16:13 -0600, Javier Vasquez wrote:
>> Hi,
>>
>> I've tried building openjdk, but it has a make dependency upon
>> ca-certificates-java, and ca-certificates-jave also has a make
>&g
On Mon, Jun 6, 2011 at 7:02 AM, Hector Martinez-Seara wrote:
> Hi,
> The case is that we use usb external drives for storing data. It is
> likely not the most efficient way but is very very cheap. And yes they
> are plug 24/7. Anyway I will look for some post booting deamon that
> cant take care o
> ...
> I've looked at the examples for netcfg, the netcfg article on the
> wiki, and the man page and
> I'm apparently missing something. The example for a wired config shows
> a single DNS
> server entry. Does netcfg support multiple DNS server entrys?
>
> Myra
>
Like the following?
DNS=('200.9
...
>>
>> The new syntax is very simplistic and only supports one wired network
>> device (configured statically or by dhcp) and we do not expect to add
>> more features in the future. We want to encourage the use of more
>> advanced network solutions, such as `networkmanager` or our own
>> `netcfg
On Fri, Jun 10, 2011 at 12:52 AM, Joker-jar wrote:
> /etc/conf.d/bridges (bridge-utils) still has old rc.conf example:
>
> # example:
> #
> # in /etc/rc.conf:
> # eth0="eth0 up"
> # eth1="eth1 up"
> # br0="br0 192.168.0.2 netmask 255.255.255.0 up"
> # INTERFACES=(lo eth0 eth1 br0)
> #
> # in /etc/
On Sun, Jun 26, 2011 at 1:05 PM, wrote:
> My card:
>
> # lspci | grep -i ethernet
> Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI
> Express Gigabit Ethernet controller (rev 03)
>
> After doing pacman -Syu, ethernet on my desktop stopped working. The card on
> my laptop is
2011/6/27 Luštický Josef :
> Is anyone still using xf86-input-mouse or xf86-input-keyboard driver?
> These packages are member of xorg group in repos but
> http://cgit.freedesktop.org/xorg/driver/xf86-input-mouse/tree/README says:
> "This driver is mainly used on non-Linux operating systems such as
Hi,
I've configured a 2-nics gateway (one internal nic and an external usb
nic hooked to the adsl modem). I configured iptables as I'm used to
do:
++
iptables-restore < /etc/iptables/empty.rules
iptables -P INPUT ACCEPT
iptables -P FORWARD ACCEPT
iptables -P OUTPUT ACCEPT
iptables -F
iptable
On Sun, Jul 10, 2011 at 5:02 PM, Dr. Robert Marmorstein
wrote:
> If you have a static IP address on your ethernet card, you probably want to
> use SNAT rather than MASQUERADE.
>
> Also, I find it odd that you are using MASQUERADE on traffic TO the ppp0
> interface. Usually, ou MASQUERADE traffic
On Sun, Jul 10, 2011 at 6:25 PM, Damjan Georgievski wrote:
> Your config looks ok, but to double check, paste the output of:
> iptables -L -nv
> iptables -t nat -L -nv
> to see the exact situation.
>
>
>> OK, on machines at the internal side of my LAN, I can ping everywhere.
>> But I can not use
On Sun, Jul 10, 2011 at 10:22 PM, Javier Vasquez
wrote:
> On Sun, Jul 10, 2011 at 6:25 PM, Damjan Georgievski wrote:
>> Your config looks ok, but to double check, paste the output of:
>> iptables -L -nv
% sudo iptables -L -nv
Password:
Chain INPUT (policy ACCEPT 1 packets, 4
On Sun, Jul 10, 2011 at 6:35 PM, Robert Marmorstein wrote:
> ...
>
> It might help you to LOG packets that are REJECTED. Then if you continue to
> have issues, you should be able to see more directly what's going on.
>
> To do that, add rules like directly before the ones with -J REJECT:
>
> ipta
On Mon, Jul 11, 2011 at 9:52 PM, Javier Vasquez wrote:
> On Sun, Jul 10, 2011 at 6:35 PM, Robert Marmorstein wrote:
>> ...
>>
>> It might help you to LOG packets that are REJECTED. Then if you continue to
>> have issues, you should be able to see more directly what&#
On Fri, Aug 12, 2011 at 7:47 AM, Karol Blazewicz
wrote:
> On Fri, Aug 12, 2011 at 3:41 PM, Mathias Huber
> wrote:
>> Hi Karol,
>>
>>> https://parabolagnulinux.org/news/parabola-gnulinux-is-happy-to-support-our-sister-project-connochaetos/
>>
>> thanks! Obviously the Arch universe is larger than
On Fri, Aug 12, 2011 at 2:01 PM, Bastien Dejean wrote:
> Hi,
>
> I've added the following lines to my .gtkrc-2.0:
>
> gtk-key-theme-name = "Emacs"
> gtk-can-change-accels = 1
>
> But they seem to be ignored...
If you have arch up to date, could it be you're using gtk-3.0 instead?
And then:
htt
Hi,
I'm not able to get my wintv-hvr 850 to work. It fails to find signal
in both x86-32 and x86-64 machines...
Some of the things I get (dmesg):
[ 143.746636] cx231xx v4l2 driver loaded.
[ 143.746862] cx231xx #0: New device Hauppauge Hauppauge Device @ 480
Mbps (2040:b140) with 6 interfaces
Hi,
I'm not a DE (desktop environment) user, and I'm not planning to
become one. I'm pretty comfortable with plain fluxbox... However
when people wonders about how to start on a linux kernel based OS,
specially to be able to run on old or low end machines, they really
expect a DE, not knowing th
2011/10/3 Cédric Girard :
> Hi,
>
> On Mon, Oct 3, 2011 at 4:02 AM, Javier Vasquez wrote:
>
>> ...
>>
>
> I'm neither a LXDE nor a Fluxbox user but you may find answers there:
> https://wiki.archlinux.org/index.php/LXDE#Replacing_Window_Managers
>
> --
So, no one with experience on arch with this usb device?
Thanks,
Javier.
On Sat, Sep 24, 2011 at 10:01 PM, Javier Vasquez
wrote:
> Hi,
>
> I'm not able to get my wintv-hvr 850 to work. It fails to find signal
> in both x86-32 and x86-64 machines...
>
> Some of
On Sun, Oct 9, 2011 at 11:29 AM, Sergey Manucharian
wrote:
> ...
>
> I used to use wintv-hvr 950 a year or two ago - it worked fine. Will try find
> those old configs and run it again with the recent kernel etc.
> (Not sure if 850 and 950 similar though).
>
> I'let you know the results.
Thanks a
On Mon, Oct 10, 2011 at 10:15 AM, Sergey Manucharian
wrote:
> Hi Javier,
>
> Excerpts from Javier Vasquez's message from Sun 09-Oct-11 11:40:
>> On Sun, Oct 9, 2011 at 11:29 AM, Sergey Manucharian
>> wrote:
>> > ...
>> >
>> > I used to use wintv-hvr 950 a year or two ago - it worked fine. Will tr
On Thu, Oct 13, 2011 at 2:50 PM, Sergey Manucharian
wrote:
> Hi Javier,
>
> Excerpts from Javier Vasquez's message from Mon 10-Oct-11 21:57:
>> ...
>
> Forgot to ask: are talking about digital or analog channels?
>
> I've tried tvtime, but I couldn't catch any digital channel (maybe I'm
> missing
Hi,
I don't use any DE, just plain fluxbox, and I have in my .xinitrc:
-
# Gnome-KeyRing
eval "`gnome-keyring-daemon -c pkcs11,secrets,ssh,gpg -s`"
#eval "`gnome-keyring-daemon -s`"
export GNOME_KEYRING_CONTROL
export SSH_AUTH_SOCK
export GPG_AGENT_INFO
export
Hi,
According to:
http://wiki.xfce.org/midori/faq
It's reported that midori works with openjdk and icedtea plugin.
However for some reason on arch (x86-64) midori-git (gtk3 support) +
webkitgtk3 doesn't grab java at all. I don't see java applets loading
on web pages requiring them, and java.co
On Tue, Nov 13, 2012 at 5:50 AM, Ionut Biru wrote:
> On 11/12/2012 07:00 PM, Javier Vasquez wrote:
>> Hi,
>>
>> According to:
>>
>> http://wiki.xfce.org/midori/faq
>>
>> It's reported that midori works with openjdk and icedtea plugin.
>>
Hi,
On firefox there's a pretty neat extension:
https://addons.mozilla.org/en-US/firefox/addon/google-plus-one
or:
www.pretty-tools.com
However that's clearly a mozilla extension, not a plugin.
I'm wondering if anyone is aware of any alternative for midori.
Thanks,
--
Javier.
On Fri, Mar 28, 2014 at 6:02 PM, Guillaume ALAUX
wrote:
> On 28 March 2014 18:30, Caleb Cushing wrote:
>>
>> I'm just wondering what the plan is, if any, for getting java 8
>> packages into arch?
>>
>> ...
>
> There is no official Java 8 package in Arch Linux because the OpenJDK
> we provide use
Hi all,
I'm trying to run pysol, but as soon as I get to load a game, pysol crashes:
Traceback (most recent call last):
File "/usr/lib/python2.5/site-packages/pysollib/app.py", line 529, in mainloop
self.runGame(id, random)
File "/usr/lib/python2.5/site-packages/pysollib/app.py", line 626
Hi all,
By reading "http://wiki.archlinux.org/index.php/Xorg_input_hotplugging";,
the upgrade on xorg-server to 1.5 was not hard for the input devices.
I'm using the Hal approach.
However I have trouble with the screen. I'm using the mach64 driver
with 1280x1024 mode and 24 bits depth, and whene
On 11/30/08, Javier Vasquez <[EMAIL PROTECTED]> wrote:
> Hi all,
>
> By reading "http://wiki.archlinux.org/index.php/Xorg_input_hotplugging";,
> the upgrade on xorg-server to 1.5 was not hard for the input devices.
> I'm using the Hal approach.
>
> Ho
On 11/30/08, Javier Vasquez <[EMAIL PROTECTED]> wrote:
> On 11/30/08, Javier Vasquez <[EMAIL PROTECTED]> wrote:
>> Hi all,
>>
>> By reading "http://wiki.archlinux.org/index.php/Xorg_input_hotplugging";,
>> the upgrade on xorg-server to 1.5 was not
On 11/30/08, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
>
> -Original Message-
>> Date: Sun, 30 Nov 2008 21:30:09 +0100
>> Subject: [arch-general] pysol/python broken?
>> From: "Javier Vasquez" <[EMAIL PROTECTED]>
>> To: arch-genera
On 11/30/08, Jan de Groot <[EMAIL PROTECTED]> wrote:
> On Sun, 2008-11-30 at 16:29 -0600, Javier Vasquez wrote:
>> Also, the server flag:
>>
>> Option "AutoAddDevices" "False"
>>
>> Doesn't help getting this solved...
>
>
On 12/1/08, Javier Vasquez <[EMAIL PROTECTED]> wrote:
> On 11/30/08, Jan de Groot <[EMAIL PROTECTED]> wrote:
>> On Sun, 2008-11-30 at 16:29 -0600, Javier Vasquez wrote:
>>> Also, the server flag:
>>>
>>> Option "AutoAddDevices" "
On 12/2/08, Javier Vasquez <[EMAIL PROTECTED]> wrote:
> On 12/1/08, Javier Vasquez <[EMAIL PROTECTED]> wrote:
>> On 11/30/08, Jan de Groot <[EMAIL PROTECTED]> wrote:
>>> On Sun, 2008-11-30 at 16:29 -0600, Javier Vasquez wrote:
>>>> Also, the serve
On 12/2/08, Javier Vasquez <[EMAIL PROTECTED]> wrote:
> On 12/2/08, Javier Vasquez <[EMAIL PROTECTED]> wrote:
>> On 12/1/08, Javier Vasquez <[EMAIL PROTECTED]> wrote:
>>> On 11/30/08, Jan de Groot <[EMAIL PROTECTED]> wrote:
>>>> On Sun, 2008-
On 12/2/08, Javier Vasquez <[EMAIL PROTECTED]> wrote:
> On 12/2/08, Javier Vasquez <[EMAIL PROTECTED]> wrote:
>> On 12/2/08, Javier Vasquez <[EMAIL PROTECTED]> wrote:
>>> On 12/1/08, Javier Vasquez <[EMAIL PROTECTED]> wrote:
>>>> On 11/30/08
On 12/3/08, Guus Snijders <[EMAIL PROTECTED]> wrote:
> 2008/12/3 Javier Vasquez <[EMAIL PROTECTED]>:
>
> [ problem switching from X to console ]
>
>
>> It took me a while, but I finally figured things up. I don't
>> understand why I never needed
Hi,
Does anyone know how to enable sun jre plugin within midori. Midori
actually recognizes the flash plugin pretty well, but I can't get it
to work on web pages requiring jre... I'm liking midori because of
being lighter than seamonkey on my box, but I miss jre support...
I was looking for a m
On 12/1/08, Javier Vasquez wrote:
> On 11/30/08, stefan-husm...@t-online.de wrote:
>>
>> -Original Message-
>>> Date: Sun, 30 Nov 2008 21:30:09 +0100
>>> Subject: [arch-general] pysol/python broken?
>>> From: "Javier Vasquez"
>>&
Hi,
My alsaplayer configuration file includes:
% cat ~/.alsaplayer/config
#
# alsaplayer config file
#
# Only edit this file if the application is not active.
# Any modifications might (will!) be lost otherwise.
#
http.buffer_size=1048576
main.default_interface=gtk2
main.default_output=alsa
main.
My alsaplayer configuration file includes:
% cat ~/.alsaplayer/config
#
# alsaplayer config file
#
# Only edit this file if the application is not active.
# Any modifications might (will!) be lost otherwise.
#
http.buffer_size=1048576
main.default_interface=gtk2
main.default_output=alsa
main.fallb
On 2/15/09, Eric Bélanger wrote:
> On Sat, Feb 14, 2009 at 11:06 PM, Jeffrey Parke
> wrote:
>> Javier Vasquez wrote:
>>>
>>> ---
>
> I don't think it's built with the gtk2 interface. Submit a bug
> report/feature request.
>
Well, I have ti
Hi all,
I have seamonkey installed, and its browser works great with the sun
java plugin (the oji). I recently tried to migrate to openjdk, and I
even installed xulrunner (I read somewhere it was a dependency
although one could install openjdk without it). Seamonkey doesn't
seem to recognize the
On 3/23/09, Gerardo Exequiel Pozzi wrote:
> Javier Vasquez wrote:
>> Hi all,
>>
>> I have seamonkey installed, and its browser works great with the sun
>> java plugin (the oji). I recently tried to migrate to openjdk, and I
>> even installed xulrunner (I r
Hi,
It happens that under the company I work for proxy (a non transparent
one), the openjdk plugin doesn't seem to work. I tries to run the
applet, but nothing.
I read several bug reports about that (non arch), so I guess
eventually it'll get fixed. However I'd like to know if there's a
work ar
Hi,
I few minutes ago I upgraded a arch box (x86_64), and to my surprise,
something that was working before, loading the kernel with parameter
"vga=0x37D" is no longer working (nothing happens). The new version
is 2.6.29.3-1. The resolution for nvidia quadro fx 570m is
"1920x1200", but the nvid
On 5/12/09, Damjan Georgievski wrote:
>> I few minutes ago I upgraded a arch box (x86_64), and to my surprise,
>> something that was working before, loading the kernel with parameter
>> "vga=0x37D" is no longer working (nothing happens). The new version
>> is 2.6.29.3-1. The resolution for nvidi
On 5/12/09, Damjan Georgievski wrote:
>> Well, I tried it, and I got uvesafb working (that's way better than no
>> FB at all), but I can't get it to work properly. It seems uvesafb is
>> not paying attention to:
>>
>> % grep '^options' /etc/modprobe.d/uvesafb
>> options uvesafb mode_option=1920x1
Hi,
Today I just got:
% pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
archlinuxfr is up to date
local-last is up to date
:: Starting full system upgrade...
warning: libtorrent: local (0.12.4-1) is newer than community (0.12.2
On 6/19/09, Aaron Griffin wrote:
> On Fri, Jun 19, 2009 at 10:44 AM, Javier Vasquez wrote:
>> Hi,
>>
>> Today I just got:
>>
>> % pacman -Syu
>> :: Synchronizing package databases...
>> core is up to date
>> extra is up to date
>> commun
Hi,
With recent linux "3.14.4-1" I can no longer use the keyboard in early
userspace, like providing the password for encrypted disk.
I do have, and has had the keyboard hook on mkinitcpio.conf.
I didn't have problems with any of the 3.13.* linux images, this is
new after installation of 3.14.4.
On Thu, May 15, 2014 at 12:11 PM, Carl Schaefer wrote:
>
> ...
>
> I don't have an answer, just a data point - I'm still on 3.14.2, and on
> that version using a USB keyboard to access an encrypted root works.
> Carl
Yes it did for me too. And 3.14.3 also worked... For some reason I
wrote it wr
On Thu, May 15, 2014 at 12:58 PM, David Magnus Henriques
wrote:
> ...
> Do you have the block hook on mkinitcpio.conf?
> David
Yes I do. My HOOKS line:
HOOKS="base udev autodetect modconf block encrypt lvm2 resume
filesystems keyboard fsck"
--
Javier.
On Fri, May 16, 2014 at 6:20 AM, Bert Münnich wrote:
>
> What about placing the keyboard hook before encrypt?
>
You were right... The order matters, :-) Weird that it was working
all along till now...
Thanks,
--
Javier.
Hi,
I'm trying to use HP myRoom tool:
https://www.myroom.hp.com
It's pretty similar to HP virtualRooms tool:
https://www.rooms.hp.com
There's an AUR package for hpvirtualrooms:
https://aur.archlinux.org/packages/hpvirtualrooms
And attached goes a package (essentially the PKGBUILD) I created
Hi,
I followed the cups instructions when it upgraded recently:
% pacman -Qs cups
local/cups 2.0.0-2
The CUPS Printing System - daemon package
local/cups-filters 1.0.61-2
OpenPrinting CUPS Filters
local/cups-pdf 2.6.1-2
PDF printer for cups
local/lib32-libcups 1.7.5-1
The CUPS Pri
> cups.socket and cups.path are the old names (used before the upgrade).
Right. Removed already. Thanks.
>
> Disable everything cups related by removing the symlinks. A find
> command should help you weed out stuff from before the upgrade:
>
> find /etc/systemd/system/ -iname "*cups*"
>
> Then
> On Wed, Nov 5, 2014 at 12:22 AM, Kyle Terrien wrote:
>> On 11/04/2014 07:50 PM, Javier Vasquez wrote:
>> I noticed org.cups.cupsd.service just fails:
>>
>> % systemctl status org.cups.cupsd.service
>> ● org.cups.cupsd.service - CUPS Scheduler
>>
> On Wed, Nov 5, 2014 at 1:56 PM, Lex Onderwater wrote:
>
> Hi Javier,
>
> like you I also had the same problem you are experiencing. But after
> changing the LogLevel in /etc/cups/cupsd.conf to:
>
> LogLevel debug
>
> I saw what the real problem was in /var/log/cups/error_log:
> [05/Nov/2014:20:3
On Sun, Dec 14, 2014 at 5:12 PM, Karol Blazewicz
wrote:
> On Mon, Dec 15, 2014 at 12:02 AM, Marcos Sánchez
> wrote:
>> For the last few days, firefox started showing the following message when
>> trying to run flash content:
>
>> Have any of you experienced a similar issue?
>
> See https://bbs.ar
1 - 100 of 153 matches
Mail list logo
