On Thu, 13 May 2004 16:32:21 +0200
Peter Zubaj <[EMAIL PROTECTED]> wrote:
Hi,
> You probably have CMEDIA AC97 which does't have PCM volume only PCM
> mute switch.
>
> There was patch with some solution
>
> http://www.mail-archive.com/alsa-
> [EMAIL PROTECTED]/msg10804.html
Yes, it is Cmedia A
> I'm running Kernel 2.64 and the version of alsa that goes with it (sorry
not
> at my machine).
> Anyway I got hold of a spdif cable so I hooked it up to my SBLive 5.1 card
> (already working using analog). I put the appropriate options in
> modules.conf. Playing a audio CD with XMMS I get sound,
Dominique Dumont wrote:
> Clemens Ladisch <[EMAIL PROTECTED]> writes:
>
> >> With this command, I get a short scratchy noise and then silence:
> >>
> >> $ tools/extract_ac3 /cdrom/VIDEO_TS/VTS_01_1.VOB |./ac3dec -C -D hw:0,2
> >
> > What are the settings shown by iecset?
>
> $ iecset
> Data: aud
guillem palou wrote:
> So, the i810_audio module isn't loaded but the snd_intel8x0 is.
>
> After this, i looked around the /proc/asound directory and there is no
> visible card configured in the system (/proc/asound/cards doen't contain any
> card).
What does lspci say about your card?
What ALSA v
Gwyneth Morrison wrote:
> On May 12, 2004 11:19 am, Clemens Ladisch wrote:
>
> > What happens when you do run "aplay -D plughw:1 something.wav"?
>
> With plughw:2 it seems to wait the required amount of time and
> then return to the shell but no output.
Any messages in the system log?
And when y
Hi out there,
Im trying to use my SIS 7012 onbard soundcard with alsa since a few
days, but i am not able to adjust the PCM channel. The only thing which
is possible is to unmute the PCM Channel but there is no possibility to
move the controller of the pcm channel ...
I've tried it meanwhile with
At Wed, 12 May 2004 20:39:46 +0200,
Christoph Haderer wrote:
>
> Hello Radoslaw,
> Simply add the following lines (shamelessly copied from prodigy.c) to
> your aureon.c
(snip)
patches are always welcome :)
--
Takashi Iwai <[EMAIL PROTECTED]>ALSA Developer - www.alsa-project.org
At Thu, 13 May 2004 06:18:22 +0200,
Martin Emrich wrote:
>
> Hi!
>
> I have a Labtec 712 USB Headset. When I plug it in, it is discovered correctly
> and I can use it. But after a few seconds or minutes, the music stops playing
> and XMMS hangs. I can't SIGKILL xmms nor rmmod the snd-usb-audio
Hi!
On Thursday 13 May 2004 15:13, you wrote:
> it looks like a generic problem of ohci and hid rather than ALSA
> problem.
Yes, I found many people having this problem with USB Sticks, Cameras,...
I'll try linux-usb-users.
Ciao
Martin
---
Hi,
You probably have CMEDIA AC97 which does't have PCM volume only PCM
mute switch.
There was patch with some solution
http://www.mail-archive.com/alsa-
[EMAIL PROTECTED]/msg10804.html
Peter Zubaj
== REKLAMA
Fenomén populárnej hudby - anglická sku
On May 13, 2004 05:32 am, Clemens Ladisch wrote:
> Gwyneth Morrison wrote:
> > With plughw:2 it seems to wait the required amount of time and
> > then return to the shell but no output.
>
> Any messages in the system log?
Nothing more then we saw before.
usb.c: registered new driver snd-usb-audi
Clemens Ladisch <[EMAIL PROTECTED]> writes:
>> >> With this command, I get a short scratchy noise and then silence:
>> >>
>> >> $ tools/extract_ac3 /cdrom/VIDEO_TS/VTS_01_1.VOB |./ac3dec -C -D hw:0,2
>> >
>> > What are the settings shown by iecset?
>>
>> $ iecset
>> Data: audio
>
> Set this to n
I've been unable to record on mic2 with my Asus P4P800 Deluxe
motherboard. I've tried all sorts of combinations with amixer, but I've
basically been assuming that the following setting should switch on mic2
rather than the default mic1:
amixer cset iface=MIXER,name='Mic Select' 1
I've found th
What does lspci say about your card?
What ALSA version do you have? (see /proc/asound/version)
Regards,
Clemens
Here is my output of lspci and cat /proc/asound/version:
bash-2.05b# lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 651 Host (rev 02)
00:01.0 PCI bridge: Silicon Integrated
I am trying to get an M-Audio Audiophile 2496 fully operational.
I cannot seem go get the envy24control to mix the SPIDF input. I can
patch it to HW 1 & 2 Out fine, but when I route via the mixer there is
no sound. I can see the level bars moving as expected in the SPIDF In
section. The PCM 1 & 2
Hi!
Anyone using this card with alsa?
--
Matthew Polashek
---
This SF.Net email is sponsored by: SourceForge.net Broadband
Sign-up now for SourceForge Broadband and get the fastest
6.0/768 connection for only $19.95/mo for the first 3 months!
ht
16 matches
Mail list logo
