Michael Mauch wrote:
> when I record a Sun au file in S16_LE format, aplay claims it's in
> S16_BE format, and auplay and sox play only noise.
.au files always have big endian format, but arecord doesn't check for
this.
HTH
Clemens
---
This
On Sun, 23 Feb 2003 10:30:02 -0500
Adam Oliver <[EMAIL PROTECTED]> wrote:
> I compiled the alsa drivers with the following options
> --with-cards=cs4232
> --with-sequencer=yes
> --with-isapnp=yes
>
> I did the make and make install and also compiled and installed the libs
> and utils. The versi
On Mon, 24 Feb 2003, Clemens Ladisch wrote:
> Michael Mauch wrote:
> > when I record a Sun au file in S16_LE format, aplay claims it's in
> > S16_BE format, and auplay and sox play only noise.
>
> .au files always have big endian format, but arecord doesn't check for
> this.
I've fixed this prob
Hello All
If/when I get my Delta 44, how are all the inputs and outputs mapped
into/out of the system? /dev/dsp0 - /dev/dsp7? How exactly does this work?
Does the driver for these cards provide any routing capabilities between
the inputs and outputs?
Any info appreciated.
Thanks - JB
# Jo
Hallo,
I'd like to test a M-Audio Quattro interface in a shop before buying.
For this, I want to do as much setup in advance on my notebook as
possible. ALSA is already configured for snd-usb-audio, but does the
Quattro's midi part need a firmware like the Midisport interfaces?
I downloaded the
Hi,
I have a Delta 410 and the (8) analog outputs are mapped in stereo to dsp0,
dsp1, dsp2 and dsp3. I don't know if the digital output works.
Alsa comes with a mixer/routing tool called envy24control which (I believe)
can make the routings you mention (I have not tried though). The tool is
very s
Frank Barknecht wrote:
> I'd like to test a M-Audio Quattro interface in a shop before buying.
> For this, I want to do as much setup in advance on my notebook as
> possible. ALSA is already configured for snd-usb-audio, but does the
> Quattro's midi part need a firmware like the Midisport interfac
Remco Poelstra wrote:
> I use the rc7 drivers at the moment.
> The SB Live machine works fine, but on the intel8x0 machine aplay uses
> 100%CPU and doesn't give any sound.
Rc7 is buggy. Try rc6 or a CVS snapshot.
HTH
Clemens
---
This sf.net
Brilliant, this worked perfectly.
Thanks a lot.
On Wed, 19 Feb 2003 08:40:28 +0100 (MET) Clemens Ladisch <[EMAIL PROTECTED]> wrote:
carlos ramirez wrote:
> Recompiling from the rc7 sources didn't fix it --
> perhaps the cvs sources then?
Yes, it has been fixed after rc7. You could get the curren
Can anyone tell me how to do this?
thanx
Kai
Bob van der Poel wrote:
> Now, when I try to use Jazz++ with ALSA I get a bunch of error messages:
>
> ioctl: Inappropriate ioctl for device
> subscribe input: Inappropriate ioctl for device
> subscribe output: Inappropriate ioctl for device
>
> And no recording ability at all. So, I se
On Sun, 23 Feb 2003, Nehal wrote:
>if you are trying to get regular front output, then
>maybe ur rear is inverted, try connecting the speakers to the other
>output jack on ur card, then the other vol controls may work..
>(currently you can only invert it through OSS drivers i believe)
D'oh! You h
Emil,
use the most current CVS and use the thinkpad option. I'm not sure what it
does, but when I turned it on, it started working undistorted. :)
- Jack
-Origina
I installed alsa-driver-0.9.0rc7 but cannot insert the module
snd-intel8x0. Modprobe fails with the error messages shown below.
There are no messages in /var/log/messages. There were also no
messages there in a previous compilation with ./configure
--with-debug=detect.
I have no trouble insert
Hi,
Has anyone tried to use the coaxial S/PDIF in on the "Trust Sound Expert Optical"
sound card? (I am _not_ talking about the s/pdif CD connector). If so, was it
successfull or not?
The input does not seem to work for me, not even in loop back mode. The optical input
works fine. I have not p
hello -
i just got alsa working on a compaq armada m700 with a ESS Technology
ES1978 Maestro 2E. everything works fine when i boot standalone, but
when i try to boot the laptop up in the docking station/convenience
base, it hangs during boot, immediately after the:
es1968: not attempting power ma
On Wednesday 19 Feb 2003 7:34 pm, Stuart Gardner wrote:
> I am still trying to get my nForce sound working via ALSA.
> Since I last said anything here, I have attempted to use the
> 2.4.21-pre2-jp15 kernel which has ALSA built in [1]
Eventually fixed this.
2.4.20 with soundcore compiled in dire
I /think/ I posted earlier, but mabye it didn't go through, i haven't gotten any
replies to date.
I'm running slack 8.1, trying to install alsa 0.9.x.
It doesnt' matter what package I get from the download page, or from CVS, I have the
same problem. I download the package(or CVS), and install in
Hello!
I don't know, if this might resolve any problem. But wouldn't it be wise, to
install the modules first and then the libs and the rest afterwards? I just
think so, because the modules are the basis for the rest. thus if installing
the libs first, may compromise the functionality. Maybe you
Hello,
I'm trying to get sound capture to work. The only alsa drivers & libs that
will install on my system are rc1 & rc2. I have Mandrake 9.0 installed
(gcc-3.2) with an ens1371 card. The modules load into memory.
arecord -f dat -d 20 -D hw:0,0 test.wav
gives me:
Recording WAVE 'test.wav' :
Don't know about earlier 2.5 kernels since I had the ac97 'not responding' trouble
then. The error:
FATAL: Module snd_card_0 not found.
is only displayed on screen, not through dmesg or any /var/log file. Going from
module-init-tools-0.9.9-pre over the ehem... stable 0.9.9 to 0.9.10pre makes n
-Original Message-
From: Ivica Bukvic [mailto:[EMAIL PROTECTED]
Sent: Monday, February 24, 2003 3:59 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: problems with Midisport 2x2
Hi all,
I've got a small problem with my Midisport 2x2 MIDI interface. While it
wo
Hi all,
Here's the problem I have (or I've been having for a long time now).
I've successfuly installed the alsa's driver and the sound works ok. But,
every time I open Kmix (since I am using KDE as my primary desktop) I can
adjust all the levels, but the only available audio inputs are Main, L
23 matches
Mail list logo
