On Mon, 13 Oct 2014 22:53:10 +0200 Takashi Iwai wrote:
> > # hda-verb /dev/snd/hwC0D0 0x17 SET_AMP 0xb02b
> > nid = 0x17, verb = 0x300, param = 0xb02b
> > value = 0x0
> >
> > The only way to increase volume is to use vlc and set the volume to 125%,
> > but
> > it still too low and I can barely
At Mon, 13 Oct 2014 23:25:10 +0300,
Nerijus Baliunas wrote:
>
> On Wed, 03 Sep 2014 17:41:15 +0200 Takashi Iwai wrote:
>
> > > > It's because the volume was overloaded in 3.14 and earlier.
> > >
> > > I suspected so, because in Windows I get a lower volume too.
> > >
> > > > It came through th
On Wed, 03 Sep 2014 17:41:15 +0200 Takashi Iwai wrote:
> > > It's because the volume was overloaded in 3.14 and earlier.
> >
> > I suspected so, because in Windows I get a lower volume too.
> >
> > > It came through the mixer widget and it has the gain over 0dB.
> > > If you set 100% amp in the
At Wed, 3 Sep 2014 18:33:28 +0300,
Nerijus Baliunas wrote:
>
> On Wed, 03 Sep 2014 17:23:43 +0200 Takashi Iwai wrote:
>
> > It's because the volume was overloaded in 3.14 and earlier.
>
> I suspected so, because in Windows I get a lower volume too.
>
> > It came through the mixer widget and it
At Wed, 3 Sep 2014 18:13:54 +0300,
Nerijus Baliunas wrote:
>
> On Wed, 03 Sep 2014 17:07:56 +0200 Takashi Iwai wrote:
>
> > You're setting the master volume to -24dB now while you've set it to
> > -18dB in the past. The percent representation doesn't mean anything
> > accurate. Just raise the
At Wed, 3 Sep 2014 17:58:18 +0300,
Nerijus Baliunas wrote:
>
> On Wed, 03 Sep 2014 16:22:51 +0200 Takashi Iwai wrote:
>
> > The mixer setup looks simply weird.
>
> Could it be because I ran alsa-info.sh just after booting notebook and not
> touching the mixer
> (it is muted by default after bo
At Wed, 3 Sep 2014 13:37:25 +0300,
Nerijus Baliunas wrote:
>
> On Wed, 03 Sep 2014 07:23:02 +0200 Takashi Iwai wrote:
>
> > > Please see https://bugzilla.redhat.com/show_bug.cgi?id=1116646 for more
> > > info.
> >
> > Please give alsa-info.sh outputs on both 3.14 and 3.15 kernels.
> > Run the
At Tue, 2 Sep 2014 20:53:11 + (UTC),
Nerijus Baliunas wrote:
>
> Hello,
>
> # lspci|grep Audio
> 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition
> Audio Controller (rev 02)
>
> With kernel-3.14.9-200.fc20.i686 audio volume is OK, with
> kernel-3.15.3-200.fc20.i686 ev
