Mandar Mitra wrote, on 2007-05-25 03:46:
> Hello again,
>
> I decided to test every bit of the system and it did turn out to be a
> hardware (cabling) problem after all!
>
> My sincere apologies to all those who spent time trying to help me. A
> wrong "capture source" setting in my fedora 2 insta
Hello again,
I decided to test every bit of the system and it did turn out to be a
hardware (cabling) problem after all!
My sincere apologies to all those who spent time trying to help me. A
wrong "capture source" setting in my fedora 2 installation had misled
me into believing that I was recordi
Mandar Mitra wrote, on 2007-05-21 01:29:
> On 5/18/07, Arthur Marsh <[EMAIL PROTECTED]> wrote:
>
>> After some tweaking with kmix for my SB0220 card, I found that I had to
>> set on the INPUT tab:
>>
>> Capture red recording light ON, level didn't seem to matter
>
> OK, I installed kmix. Now I
On 5/18/07, Arthur Marsh <[EMAIL PROTECTED]> wrote:
> After some tweaking with kmix for my SB0220 card, I found that I had to
> set on the INPUT tab:
>
> Capture red recording light ON, level didn't seem to matter
OK, I installed kmix. Now I have Capture and Line (in the Input tab)
on, and the le
Mandar Mitra wrote, on 2007-05-17 04:00:
>>> cat /proc/asound/version (for the current setup that doesn't work)
>
> So I downloaded, compiled and installed alsa-driver, alsa-lib,
> alsa-utils, and now /proc/asound/version says:
>
> Advanced Linux Sound Architecture Driver Version 1.0.13.
> Compil
> > cat /proc/asound/version (for the current setup that doesn't work)
So I downloaded, compiled and installed alsa-driver, alsa-lib,
alsa-utils, and now /proc/asound/version says:
Advanced Linux Sound Architecture Driver Version 1.0.13.
Compiled on May 16 2007 for kernel 2.6.13-15-smp (SMP).
I'
Hi,
On 5/15/07, Arthur Marsh <[EMAIL PROTECTED]> wrote:
> lspci -v|grep -i live
mitra% /sbin/lspci -v | grep -i live
02:03.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
Subsystem: Creative Labs SBLive! 5.1 Model SB0100
02:03.1 Input device controller: Creative La
Mandar Mitra wrote, on 2007-05-15 11:56:
> Hello all,
>
> If you have a SB Live 5.1 card, could you please do an experiment for
> me? Could you record something via line-in and see if you get both
> channels?
>
> When I do this, I get only the right channel. Left channel is muted,
> and tweaking
Attempting to install the correct Dell OEM snd-emu10k1x driver this time as per http://www.alsa-project.org/alsa-doc/doc-php/template.php?company=Creative+Labs&card=Sound+Blaster+PCI+X+%28Dell+OEM%29.&chip=SB0200&module=emu10k1x, I reach the point of inserting the modules into the kernel. When I a
Hi,
Soundblaster Live Value card (device id - 1102:0006) is not supported.
It looks like it is not based on emu10k1.
Peter Zubaj
http://www.logofun.pobox.sk - urobte radost svojmu telefonu
---
This SF.ne
Subject: Re: [Alsa-user] SB Live 5.1 multiple soundfonts
Date: Thu, 30 Oct 2003 16:23:43 +
>
> I managed to load soundfont with sfxload. But then I wanted to load
> multiple fonts and tried
> sfxload -b1 (and with -b0) myFont. If I have understood correctly, after
> that I should have
>
> I managed to load soundfont with sfxload. But then I wanted to load
> multiple fonts and tried
> sfxload -b1 (and with -b0) myFont. If I have understood correctly, after
> that I should have more instruments to choose in my midi program (muse,
> noteedit).
>
> However, it doesn't do any change.
On Fri, 20 Jun 2003, Ken Witherow wrote:
> I've got a SB Live 5.1, which is working fine with ALSA in 2.5.69, but in
> either 2.5.70 (don't remember if it worked since I had other problems) or
> 2.5.71, it stopped working, giving me the following error on load:
fixed by running snddevices from 0.
From: "Denny Schierz" <[EMAIL PROTECTED]>
To: "Brad Cramer" <[EMAIL PROTECTED]>
Cc: "alsa-user" <[EMAIL PROTECTED]>
Sent: Tuesday, December 04, 2001 12:46 PM
Subject: Re: [Alsa-user] SB Live 5.1 and digital out
> hi,
>
> you have to slide u
14 matches
Mail list logo
