I have P5LD2 SE not P5LD2... it's a bit cheaper and different.. It has
a realtek ethernet nic instead of an intel one, ad1986 instead of
alc882 and intel ich7 "normal" sata controller instead of the intel
matrix sata controller (which has ahci support in addition to ahci)..
2007/1/9, Chris Leung <
I don't know whether it support 8 channel or not. Maybe need some new
soft route channel definitions. But I don't know how to define it in alsa
by myself.
> On Mon, 2007-01-08 at 12:53 +0100, emisca wrote:
>> I have a p5ld2 se motherboard with ad1986 codec... I need the option
>> model=3stack
>>
Thx for your info. However, it still won't work.
However, when I search thru ASUS website, the P5LD2 should use Realtek
ALC882 8-ch High-Definition Audio CODEC.
> I have a p5ld2 se motherboard with ad1986 codec... I need the option
> model=3stack
> Have you tried it?
>
> 2007/1/8, Per Thomas J
On Mon, 2007-01-08 at 12:33 +0100, Per Thomas Jahr wrote:
> I will try the line-in when I get home.
Both line-in and mic works here with the connections on the back of the
computer (I have no front connectors). Not sure if both channels work
since I still only can hear the left channel.
--
Per
On Mon, 2007-01-08 at 12:53 +0100, emisca wrote:
> I have a p5ld2 se motherboard with ad1986 codec... I need the option
> model=3stack
> Have you tried it?
Yes, I have tried all of the following without success (this is from
ALSA-Configuration.txt):
6stack6-jack
6stack-digditto with S
I have a p5ld2 se motherboard with ad1986 codec... I need the option
model=3stack
Have you tried it?
2007/1/8, Per Thomas Jahr <[EMAIL PROTECTED]>:
> On Mon, 2007-01-08 at 12:13 +0800, Chris Leung wrote:
> ...
> > [EMAIL PROTECTED]:/etc/modprobe.d# cat /proc/asound/card0/codec#0 |less
> > Codec: A
On Mon, 2007-01-08 at 12:13 +0800, Chris Leung wrote:
...
> [EMAIL PROTECTED]:/etc/modprobe.d# cat /proc/asound/card0/codec#0 |less
> Codec: Analog Devices AD1988
> Address: 0
> Vendor Id: 0x11d41988
> Subsystem Id: 0x104381e1
> Revision Id: 0x100400
...
My codec info:
Codec: Analog Devices AD198
Dear all,
I've Asus P5B-E motherboard. Installed with 2.6.19.1 Linux kernel. I
found that I can't get line-in signal even I unmute all channel and turn
volume to maximum. It seem sound playing(pcm) is good. But no line-in
signal.
[EMAIL PROTECTED]:/etc/modprobe.d# cat /proc/asound/version
Adv
