Hi again,
> > pinned the problem on my PCMCIA ethernet card of all things.
> > it's somthing to do with PCI or interrupts interfering with the USB
aha, so is there a way to change things so that I don't have several other bits of
hardware using the same irq as usb? BIOS only lets me change the
Hello,
the inputs from my quattro are noisy and distorted. Sometimes the levels are very
low, and sometimes they are overdriven. They always have some kind of
digitizing-sounding noise. I have tried several versions of hotplug and alsa
including cvs, with the quattro .asoundrc from Patrick Sh
> anyway, could you comment out #define IGNORE_CTL_ERROR at the
> beginning of usbmixer.c? then the error won't be returned but
> ignored. please use --with-debug=detect in this case, too, at least
> once, for checking which controls are bad.
Hi again,
OK, now alsamixer starts, with more contro
Hi Takashi,
> i hope this is fixed now on cvs. please give a try.
>
still no luck- to recap the story so far: if I first boot windows, then boot linux,
leaving the power on, I get a midi device (garbled signals), and audio capture rate
seems to work for arecord, but alsamixer won't start, sayi
Hi again,
> Apparently, the Windows driver did change the firmware.
> Does it still work after the Extigy was unplugged?
no!
> > I wonder what's up with alsamixer?
>
> Probably some problem with old entries in /etc/asound.state. Try deleting
> it.
I had already deleted it... Now, after dis/reco
Hi Clemens
> What firmware version does your Extigy have?
> Did you try upgrading to the latest version (V1.1.020507)?
I just tried to upgrade, but the installer said I already had the latest version.
Back in Linux, now "alsamixer -c1" says:
alsamixer: function snd_mixer_load failed: Invalid argum
> > if I try to record 5 seconds at 48000, it takes 30
> > seconds, at 8000Hz.
> Please post the contents of /proc/asound/cardX/stream0 while recording.
>
Here it is:
Creative Technology Ltd. : USB Audio
Playback:
Status: Stop
Interface 1
Altset 1
Format: S16_LE
Channels: 2
How do I change the capture rate of the extigy?
So far it is stuck at 8000Hz, and if I try different rates with arecord,
the correct number of samples are taken for the requested rate, but over a different
period, eg. if I try to record 5 seconds at 48000, it takes 30 seconds, at 8000Hz. Am
I mi
since changing from alsa 0.5 to 0.9, the alsa-libs/test/rawmidi test program fails
every time!
pmidi will play directly to a port (eg. emu10k1 or aseqview) , but I can't get any
aconnect'ed virmidi ports to work.
aconnect doesn't report any problem.
does anyone know about this problem?
tim
___
