de
> from 2ch to 6 ch so that mic and line in jacks are retasked as output ?
I can't answer, because of the lack of channel mode.
Any further help is appreciated.
Ingo
--
Download BIRT iHub F-Type - The Free
Hi.
I'm using alsa 1.0.28 (lib and utils). Everything works fine so far, i.e.
stereo output through speakers and headphone as well as S/PDIF and all
possible capturing.
According to my mainboard manual, the codec supports 5.1 (analog) surround by
using the rear "line out" jack (for rear surround)
The two other wikis are both for users, one is official, the other is
unofficial:
http://bugtrack.alsa-project.org/main/index.php/Main_Page
http://alsa.opensrc.org/
I don't know much about the official wikis though...
Greets, Ingo
Wallace, Brooke schrieb:
> https://bugtrack.alsa-pro
in the wiki to share your experience with other
users. Thanks a lot!
Greets, Ingo
Brian J. Murrell schrieb:
> On Thu, 2007-06-07 at 15:02 +0100, James Courtier-Dutton wrote:
>> You put the host specific stuff in /etc/asound.conf
>> You put the user specific stuff in .asoundrc
&g
on't need to mess with .asoundrc. Everything you have to do now is make
every application use the appropriate device. This differs heavily from
application to application, so no detailed instruction can be given.
Just look for sound/alsa/playback device etc.
Regards, Ingo
-
wo on the front
when a stereo sound is being played on it. The "plug:" prefix makes it
use the "plug" plugin filling the channels 3 to 6 with silence, making a
5.1 sound out of it. The advantage of the second solution is that you
can use it with both stereo and 5.1 sounds.
I
such file. Is there a workaround? What can I do if I do
> not have this file? There is no file 'version.h' in the whole /lib
> directory. Also why do I need this?
>
> Maybe there is a solution to my original problem (e.g. a command-line
>
Hi!
Maybe you can find something in the archive
(http://news.gmane.org/gmane.linux.alsa.user). I remember a post that
might help you:
http://article.gmane.org/gmane.linux.alsa.user/26665
Please tell me, if it works...
Regards, Ingo
Alexander Kartzow schrieb:
> Hello,
>
> I am ne
channels and one
for all channles. Once this is set up, you have to tell MythTV to pick
this channel when changing volume.
If anything in these two articles is unclear, please tell me so I can
change them.
Regards, Ingo
shacky schrieb:
> Hi.
> I configured a SoundBlaster Live 5.1 with alsaco
t of
aplay -L and look for spdif/raw/digital, then compare this plugin's
definition with the hw device's definition. They should work similarly.
I hope this helps!
Regards, Ingo
Stephan Olbrich schrieb:
> Hi together!
>
> I bought the Terratec Aureon 5.1 USB MK.2 becaus
Hi!
Just in case you didn't know about the article on the wiki about the
terratec, here it is:
http://alsa.opensrc.org/Terratec_Aureon_5.1_USB_MK.2
The guy who wrote the article seems to have it working quite well, but I
can't really say anything about it...
Regards, Ingo
Oli
Bill Unruh schrieb:
> On Thu, 22 Mar 2007, Ingo Müller wrote:
>
>> Quote: "Fascism is an authoritarian political ideology and mass movement
>> that seeks to place the nation (defined in exclusive biological,
>> cultural, and historical terms) above all other loyal
program scripts and deal with things deep inside of the system
just in order to choose his default sound card.
Regards, Ingo Müller
Bill Unruh schrieb:
> On Thu, 22 Mar 2007, Steve White wrote:
>
>> Lee,
>>
>>> On 3/22/07, Steve White <[EMAIL PROTECTED]> wrote:
&
by replacing the slave
"front" by "surround51" or by a multi device like I did in the example
in the howto.
So, I hope this helps you to understand the howto. If you have more
questions, please tell me! It is necessary that people tell me what they
don't understand
Hi!
Did you see the softvol master volume howto? If you don't get it to work
in another way, maybe this one may help you:
http://alsa.opensrc.org/How_to_use_softvol_to_control_the_master_volume
If you have any questions or suggestions for the howto, please let me know.
Regards, Ingo
T
Hi!
When I compiled the alsa-utils package, I had a different error, but
maybe they both have the same reason: alsa-driver (and alsa-lib?) has to
be compiled and installed befor you can compile the alsa-utils package.
I hope this helps...
Regards, Ingo
Padraic Shafer schrieb:
> Hi,
>
u did it. Anything helps, even if it's only the fact that a firmeware
is needed, URLs about web pages about this problem etc...)
Regards, Ingo
> With:
> aplay -Dplughw:0,0
> I get:
>
> ALSA lib pcm_hw.c:1357:(_snd_pcm_hw_open) Invalid value for card
> aplay: main:550:
> Yeah!
>
> Thanx a lot, Ingo.
> After following your detailed instructions (not suited for the total
> Linux beginner but it was OK for me as I already read a few hours in my
> Linux book)
>
> cat /proc/asound/cards gives me this:
>
> 0 [Gina24
ute the make
install command if the make command didn't either.
If everything worked fine, you only have to restart your computer (well,
you don't have to, but it's easier than restarting alsa and loading the
new drivers manually).
I hope this works for you! If you have any
here:
http://www.alsa-project.org/alsa-doc/alsa-lib/pcm_plugins.html#pcm_plugins_file
It'd be great if you reported if it works!
Regards, Ingo
Phil Rhoades schrieb:
> People,
>
> I have FC6:
>
> alsa-utils-1.0.13-1.fc6
> alsa-lib-1.0.13-1.fc6
>
!
Regards, Ingo
Mathieu Mourez schrieb:
> Hello,
>
> I'm looking for a way to mix sounds in real time and send them to an
> icecast server on a machine that doesn't have a soundcard. I have a
> perl script that monitors my logs and plays certain files on certain
&
son is that the applications you are using need one device
that it playback and recording device at the same time, just use the
asym plugin (http://alsa.opensrc.org/Asym).
I hope this helps...
Regards, Ingo
Kibanadai schrieb:
> Dear all,
>
> Hello to everyone as this is my first email to the
then, it should be linked to.
I invite everybody to join a discussion about how to do that,
preferrably on the community portal of the wiki [4]! For example, there
are great propositions on [5] and [6]. Maybe a reorganisation can be
based on one of them...
I'm looking forward to hear from as m
t might be playing around with the buffer. On my mold onboard
sound chip, the sound quality was different with different buffer sizes.
Regards, Ingo
roman schrieb:
> Am Freitag 16 Februar 2007 13:09 schrieb roman:
>> Am Donnerstag 15 Februar 2007 11:37 schrieb roman:
>>> Codec: An
r wants. I just want to contribute as much as I
can, even if it's only ideas...
Regards, Ingo
Lee Revell schrieb:
> On 2/15/07, Bill Unruh <[EMAIL PROTECTED]> wrote:
>> On Thu, 15 Feb 2007, Lee Revell wrote:
>>> Why muck around with the kernel drivers anyway?
www.alsa-project.org/alsa-doc/alsa-lib/pcm_plugins.html#pcm_plugins_slave
Hope this helps...
Regards, Ingo
el hombre schrieb:
> Hi.
>
> If I run:
> cat /dev/urandom | aplay -f cd --buffer-size=1024
> then the hardware buffer size is 1024 - I can see this using:
> grep buf
c.org/Playing_stereo_on_surround_sound_setup_(Howto)
The "ch51dup" device explained there does stereo to 5.1 upmixing using
the surround51 device a playback device, which should be able to produce
6 channel sound.
Regards, Ingo
Sorin Peste schrieb:
> Hello,
>
> I've got an issue with th
Hi!
On the alsa-devel mailing list, there was a thread recently about how to
use udev to distribute card indexes. Maybe this could help you.
http://thread.gmane.org/gmane.linux.alsa.devel/44498
Regards, Ingo
Michael Lara schrieb:
> Hello,
>
> Is it possible to define the removabl
first channel of its slave (I hope that its the left
one), and the bindings section of the recright device binds its channel
to the second of its slave. Like this (I hope), the recX devices will
only record the X channel.
If we can approve that the above setup works, I'm glad that we found the
s
e of days and will then try
to seperate the two channels. Maybe, we should create a new page about
that problem in general, so you could link to that page on the Edirol
UA-25 page.
Unfortunately, I can't help you with the low-latency and midi stuff :-/
Regards, Ingo
Jean-Michel Pouré schrieb
ons. If you want to
use another device, either create an alias with
pcm.!default { slave.pcm "" }
or configure your applications appropiately (How to do this, depends on
the application).
I'm going to improve the articles of the wiki in the next few months, so
if you have any further question
thing else... I hope that you can get it to work somehow anyway!
Regards, Ingo
Jean-Michel Pouré schrieb:
> Le vendredi 09 février 2007 à 20:27 +0100, Ingo Müller a écrit :
>> Hi!
>>
>> I don't know wether this works, it's maybe just an idea. Look at "lsusb
>
a small howto in the wiki above. That'd be great!!
Regards, Ingo
wim delvaux schrieb:
> Hi have a ALC882 on an ASUS MOBO.
>
> when I run kmix i get no switches to preamplify my microphone causing me to
> be
Hi!
I don't know wether this works, it's maybe just an idea. Look at "lsusb
-v". In the first line of your device, it says "Bus xxx Device yyy:
...". Maybe you can use the values xxx and yyy with udev to give the two
devices unique names - as long as they don'
Hi!
Bruno Schneider schrieb:
> Great! It works! :) Thanks Ingo!
That's good to hear!
> I restarted ALSA and the volume knob became available. As I had used
> the new device before restarting ALSA, I'm not sure if it could be
> done without previously playing sound.
. Maybe an ALSA restart is necessary, too. Please tell me, if you
get it to work, so I can improve the howto. Thanks.
Regards, Ingo
Bruno Schneider schrieb:
> On 2/8/07, Ingo Müller wrote:
> [...]
>> If you now make XMMS use the "xmms" device, you get a new volume contr
e, that applications use the "default"
device (which is what they do by default).
I hope it works this time. Regards, Ingo
Dag Ringdal schrieb:
> It works with wav files but not with mp3. I use Amaroc to play music, and it
> plays mp3s on the other soundcard. I have tried to make
ol plugin, too:
http://alsa.opensrc.org/How_to_use_softvol_to_control_the_master_volume
I hope this will help you to get it working. Tell me if it doesn't!
Regards, Ingo
Bruno Schneider schrieb:
> Hi all, I use XMMS to listen to music, while other sound enabled
> applications do their things. These other application
Hi!
I can't tell wether what you wrote is correct, but as it works for you,
it should be. What'd be great are comments in the asound.conf file, but
it's up to you if you want to spend more time. Anyway, thanks a lot for
your contributions!!
Regards, Ingo
Jean-Michel Pour
plughw
card1
device 0
}
Read more about asoundrc configuration at
http://alsa.opensrc.org/.asoundrc (and the sites it links to at the bottom).
I hope this makes it work! Regards, Ingo
Dag Ringdal schrieb:
> Ye I get a strong whistle. And the soundcard is blinking, which
oesn't
work, try to mute stuff (sometimes it works). Any chance of getting any
sound?
Regards, Ingo
Dag Ringdal schrieb:
> Here is the output of aplay -l:
> aplay -l
> List of PLAYBACK Hardware Devices
> card 0: CK8S [NVidia CK8S], device 0: Intel ICH [NVidia CK8S]
> Sub
Sorry! The command should be:
speaker-test -c2 -Ddefault
Ingo Müller schrieb:
> Hi!
>
> The first command was "aplay -l" (lower case L), not "aplay -I"
> (uppercase i). ALSA is installed, so I guess you have all packages
> installed that you need. Now
Hi!
The first command was "aplay -l" (lower case L), not "aplay -I"
(uppercase i). ALSA is installed, so I guess you have all packages
installed that you need. Now try:
speaker-test -c2 default
Does that produce any sound?
Regards, Ingo
Dag Ringdal schrieb:
> linux-lab
Hi!
These files probably only exist if you created them. I just thought,
that Yast may have done that for you, but apparently, it didn't. To find
out what the problem is, the output of "aplay -l" and "aplay -L" might
be usefull.
Greets, Ingo
Dag Ringdal schrieb:
etc/asound.conf - same as above, but all users
/etc/asound.state - the values of the mixer controls from when "alsactl
store" was last executed (probably last shutdown)
You can try to rename some of those files, maybe that helps...
Regards, Ingo
Dag Ringdal schrieb:
> Hi,
>
>
ttable.1.5 0.5 #was 1
}
That puts the avarage of the front and left input channels to the center
and lfe output channels instead of the sum of these input channels. I
*guess*, that that's rather what you want to do, otherwise the center
can be too loud.
Regards, Ingo
flocchini schrie
Hi!
For everyone interested in a solution to the problem below: Thanks to
Benjamin Eikel, there is a great Howto in the ALSA wiki now.
http://alsa.opensrc.org/Low-pass_filter_for_subwoofer_channel_(HOWTO)
It only works with ALSA version 1.0.14rc2 (or probably above).
Regards, Ingo
Benjamin
Hi!
Welcome to the list! Archives are available here:
http://news.gmane.org/gmane.linux.alsa.user
Regards, Ingo
Jake B schrieb:
> Hi, I'm new to the mailing list thing... Does there anywhere exist an
> archive of the content of this mailing list?
> Let me know. Than
asn't able to do, please post it here! That'd
be great.
Regards, Ingo
Benjamin Eikel schrieb:
> Hello,
>
> I am trying to setup a lowpass filter for my subwoofer channel. I used the
> configuration template which is given in the ALSA wiki
> (http://alsa.opensrc.org/Su
need to know more about how the
plugins work. If somebody could give me hints where to find more
information, that'd be great...
Regards, Ingo
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net'
you can configure it in a way that it uses one playback device for music
and another one for TV. I know that with Amarok, you can select
different devices for mono, stereo, 4.0 and 5.1 sound sources.
I hope this helps a bit...
Greets, Ingo
Allan Klinbail schrieb:
> Hi All
>
> I'm
hed the reset button of my
computer, but maybe killing the process works just fine, too. Again, if
you found out something precise, please post it here or write an article
in the wiki.
I hope this helps... Greets, Ingo
are stereo controls. Have a look at it, maybe
you can do it similarly for 6 channels.
http://alsa.opensrc.org/How_to_use_softvol_to_control_the_master_volume
Hope this helps...
Greets, Ingo
Sebastian Schäfer schrieb:
> Hi everybody!
>
> I bought a Terratec Aureon 5.1 PCI which uses
create an asoundrc in a way that the default device is a plug
device, so the sample rate is converted for every application using this
device, without the need to reconfigure them.
Greets, Ingo
Juha Pahkala schrieb:
> Hi list,
>
> I've got an amd64 processor running o
ithout an asoundrc file (using a wav file
with the right sample rate etc), but you won't be able to do that the
way you want in 90% of the cases. If your sound card only accepts a
48kHz sample rate and you want to play files with other rates, you DO
need an asoundrc to solve that problem system wi
c), but you won't be able to do that the
way you want in 90% of the cases. If your sound card only accepts a
48kHz sample rate and you want to play files with other rates, you DO
need an asoundrc to solve that problem system wide.
Hope this helps...
Greets, Ingo
Johan Spee schrieb:
> U
Hi!
Maybe try
aplay -Dplug:'hw:0,0' test.wav
The plug plugin automatically to the right sample format and rate
(AFAIK). You can use it in your asoundrc file, too.
See http://www.alsa-project.org/alsa-doc/alsa-lib/pcm_plugins.html
(Automatic conversion plugin).
I hope this helps.
Gr
i
plugin has a comparable limitation (that's only a guess, I don't get
errors, just no sound).
Greets, Ingo
Sebastian Schäfer schrieb:
> Hi!
>
> The AlSA documentation does not mention such a limitation, and it would
> be way more logical to me :-)
>
> Link to the docs
Hi!
As far as I understand it, "theoretically", it should work both ways.
You still have to do it the way that the dmix device is the last device,
because the dmix plugin requires a hardware slave (AFAIK). It can't pass
the sound data to a virtual device like softvol.
Greets,
. Please
report back if it works for you.
Greets, Ingo
# first
pcm.!default {
typeplug
slave.pcm "softvol"
}
# second
pcm.softvol {
typesoftvol
slave {
pcm "dmix"
}
c
Hi! Sorry for the wait. Here's the link of the bug/feature request:
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2664
The computer with the asoundrc file has no video card at the moment.
I'll post it ASAP.
Greets Ingo
Emilio Scalise schrieb:
> Could you post the asound.c
o
underline the need of such a function, if you need it, too.
I hope that helps you.
Greets, Ingo
Emilio Scalise schrieb:
> I have an ad1986 based card (snd-hda-intel) and I asked in this list
> about a similar feature many times but nothing!
> My card hasn't a master control at a
omment to show,
that I'm not the only one desiring such a feature. If you should find a
way how to do it with the current versions, please tell me how! Thanks
in advance.
Greets, Ingo
Nicolas George schrieb:
> Hi.
>
> Consider the following .asoundrc:
>
> pcm.mixer {
open_conf) The field ipc_gid must be a
valid group
Are there any suggestions? Could it be related to
the fact, that I have also a tv card in the barebone (but currently without any
modules load at startup)?
Kind Regards,
Ingo
--
7;t play" (error messages, other symptoms)? Have you
checked mixer settings? ...
Cheers,
Ingo
--
Ingo Strauch Registered Linux User #227900 (http://counter.li.org/)
http://www.the-one-brack.org/
pgp8bGvNRyiuF.pgp
Description: PGP signature
obably upgrade your kernel for this version
of alsa.
> > Is there a symlink from
> > /lib/modules/2.4.19-4GB/build
> > to the include directory of the kernel source/header tree?
>
> yes!!
Really seems like kernel upgrade is the
oder Verzeichnis nicht gefunden
Do you have the kernel sources/headers installed? Does
/lib/modules/2.4.19-4GB/build/include/acpi/acpi_bus.h
exist? Is there a symlink from
/lib/modules/2.4.19-4GB/build
to the include directory of the kernel source/header tree?
Cheers,
Ingo
--
Ingo Strauc
ile or directory
There are plenty of 'No such file or directory' messages in your output.
Everything else is most likely just a consequence of that.
Do you have kernel headers/sources installed?
Cheers,
Ingo
--
Ingo Strauch Registered Linux User #227900 (http://counter.li.org/)
http://www.the-one-brack.org/
pgp0.pgp
Description: PGP signature
pt-get installs/upgrades.
Just as additional info...
Cheers,
Ingo
--
"What're quantum mechanics?"
"I don't know. People who repair quantums I suppose."
--Rincewind, Terry Pratchett "Eric"
pgp0.pgp
Description: PGP signature
mms can play CDs via soundcard. But it first had to be configured in
the CD input plugin.
Cheers,
Ingo
--
"What're quantum mechanics?"
"I don't know. People who repair quantums I suppose."
--Rincewind, Terry Pratchett "Eric"
pgp0.pgp
Description: PGP signature
t least I can choose ALSA in mplayer
and get to hear the sound ;-)
Cheers,
Ingo
--
"What're quantum mechanics?"
"I don't know. People who repair quantums I suppose."
--Rincewind, Terry Pratchett "Eric"
pgp0.pgp
Description: PGP signature
ctory? You probably need to create the correct devices for the
new ALSA included in the kernel sources.
I also did an upgrade to kernel 2.6.4 and KDE 3.2.1 (on SuSE 9.0
though). Was quite some hassle and it only worked after I disabled the
KDE sound daemon (artsd) and stopped all KDE mixer app
..
somewhere i found, that this device /dev/snd/pmcC0D3p is used for
digital output, but i can`t use it.
I hav no idea, what i can do to get this thing running..
best wishes,
ingo
changed the Config in /usr/share/alsa/Am Do, den 26.02.2004 schrieb
Clemens Ladisch um 17:48:
> Ingo Reimann wr
pass-through. if i try to access this device directly,
i get an "snd_pcm_open: No such device", even if it is there and i use
devfs. is this correct? COuld it be a hint to by problems?
best wishes, and thanks
ingo
--
Ingo Reimann [EMAIL PROTECTED]
Klos
under M$, yes, it worked with my
old Sblive5.1!
I don`t have a Platinum eX, but an orginary Audigy 2 , but i doubt, that there
are large differences..
Could you show me the output of your /proc/asound/Audigy2/emu10k1? Maybe i find
some differences..
Thanks for your help,
Ingo
Zitat von Lionel
put Jack"
and " and "IEC958 Optical Raw" Switches with alsamixer
Any help would be kindly accepted
best wishes,
Ingo
[EMAIL PROTECTED]:~/ftp$ cat /proc/asound/Audigy2/emu10k1
EMU10K1
Card : Audigy
Internal TRAM (words) : 0x2000
External TRAM (words
...
best wishes,
ingo
---
This SF. Net email is sponsored by: GoToMyPC
GoToMyPC is the fast, easy and secure way to access your computer from
any Web browser or wireless device. Click here to Try it Free!
https://www.gotomypc.com/tr/OSDN/AW
Hi Peter,
i have a single coaxial line from my card to the Amp. It is plugged into
the "Digital/analog Jack"
The alternative analog discrete 7.1 connection works fine, but i want my
denon AMP to decode DTS, DD and PCM.
regards,
Ingo
On Tue, 2003-11-11 at 09:15, p z wrote:
>
ed me
"Once you have standard stereo working, just enable passthru in the xine
config, and passthru will work."
so, this seems to be my problem.
What may i try, how can i fix this.
Any help would be nice.
Ingo
PS:
[EMAIL PROTECTED]:~$ cat /proc/asound/Audigy2/emu10k1
EMU10K1
Card
Ingo
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
___
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
with alsa, but even after
unloading all bttv-related modules nothing changed.
If you need any additional information, please let me know.
Thanks Ingo
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek
regards
Ingo Haas
BEGIN:VCARD
VERSION:2.1
N:Haas;Ingo
FN:Haas Ingo
ORG:PLG AG;Softron
TEL;WORK;VOICE:144
ADR;WORK:;;DEUTSCHLAND
LABEL;WORK:DEUTSCHLAND
EMAIL;PREF;INTERNET:[EMAIL PROTECTED]
REV:20020830T104215Z
END:VCARD
on is 0.9.0rc6.
greetings,
Ingo
---
This SF.NET email is sponsored by: FREE SSL Guide from Thawte
are you planning your Web Server Security? Click here to get a FREE
Thawte SSL guide and find the answers to all your SSL security issues.
x27;t work any more. I suspect, it might be a problem with devfs,
because it was new installed with Mandrake 8.1. I compiled the driver with the
debug option, but I didn't get any messages.
Has anybody an idea what to do?
Ingo
This is the alsa part of modules.conf:
# ALSA portion
a
set_params:719: Sample format non available
I tested other sample rates, but the last message doesn't change.
regards,
Ingo
___
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
? If so, which software can I use?
I'm using the 0.9.0beta7 packages on a Mandrake 8.0 system.
regards,
Ingo
___
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
86 matches
Mail list logo
