Hi there,
Further on the support of 3G voice modems ...
this data sheet :
http://www.sierrawireless.com/resources/product/MC8775V%20Datasheet%20rev%201.0.pdf
suggests that the Sierra wireless voice/data modem has the following PCM
outputs :
VOICE SERVICES:
PCM Audio
IS-127 & IS-733-A Vocoders:
1
Hello,
Is anyone out there aware of any 3G voice modems which are ALSA compatable ?
It would be nice to be able to use a laptop or computer as a mobile phone.
thanks
Matt
--
http://www.flatmaxstudios.com
-
Check out the ne
BTW, I found a card that does this: Diamond XtremeSound - 7.1/24
bit Sound Card : http://www.diamondmm.com/XS71.php
It shows up in "lspci" as :
Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
... and in "aplay -l" as :
List of PLAYBACK Hardwar
lists wrote:
> To All:
>
> I've not yet been able to get the Nvidia MCP61 (RealTek ALC662) onboard sound
> working (EliteGroup Computer Systems) on the Athlon 64 3200+ motherboard.
> onfig Status: cfg=no, avail=yes, need=no, active=unknown
>
[snip]
> and the pastebin is http://pastebin.ca/10486
De (from) (von) <[EMAIL PROTECTED]> :
> try kernel 2.6.25 from Sid. You can download the linux-image-,
> linux-headers- and linux-kbuild- .deb files and install them
> with "dpkg -i ..." on Lenny without dependency problems.
It's made and every things are ok. I have all channels on alsamixer.
matthieu castet wrote:
> stan wrote:
>> matthieu castet wrote:
>>> Hi,
>>>
>>> I am using 2.6.25 and SBLive! Value [CT4670].
>>> The card works, I got sound. But the mixer do nothing. No mute, no
>>> sound level.
>>>
>>> What can I do to make the mixer work again ?
>>>
For information with 2.6.25
To All:
I've not yet been able to get the Nvidia MCP61 (RealTek ALC662) onboard sound
working (EliteGroup Computer Systems) on the Athlon 64 3200+ motherboard.
A hwinfo is enclosed:
21: PCI 05.0: 0403 Audio device
[Created at pci.301]
UDI: /org/freedesktop/Hal/devices/pci_10de_3f0
Unique
Constant Brouerius van Nidek wrote:
[snip]
>
> Thanks for the explanation about over and under run.
> Will do some homework on man arecord. What is a plughw device. Never heard
> of
> that expression.
plughw is an alsa device that makes sure the hardware gets data in a
format it can use. It do
stan wrote:
> matthieu castet wrote:
>> Hi,
>>
>> I am using 2.6.25 and SBLive! Value [CT4670].
>> The card works, I got sound. But the mixer do nothing. No mute, no
>> sound level.
>>
>> What can I do to make the mixer work again ?
>>
>>
>> Matthieu
>>
>> PS : I am on debian unstable
>>
>>
> I
Alexis MARTINI wrote:
> Hello,
>
> I have a litle problem since I removed my Sound Blaster (may be
> faulty) card and use the internal sound card of my mother board. I
> have to make an alsa-conf in order to have the sound!
> I already checked some points around:
>
Could you run the script here
On Monday 16 June 2008, you wrote:
> Constant Brouerius van Nidek wrote:
> > Well it interrupts Skype. Five to ten overruns and than I am out of
> > Skype, aborted..
> > Do not know if I can influence the Alsa settings. Looking into the Skype
> > sound setup II found that incomming, outgoing and r
turtle wrote:
> /etc/asound.state does not save and restore settings in conjunction with my
> intel AC97 chip. I have RTFM and spent alot of time researching the issue.
>
> Everytime I boot I have to open a terminal sudo alsamixer, manually
> unmute "PCM" and raise the volume for sound to work.
Johan Stenehall wrote:
> Sound works in some programs and not in other. "Soundcard" is an ati
> radeon hd 2600pro graphic card with built in 5.1 sound, connected to
> my surround receiver using a hdmi cable. Running Ubuntu 8.04. As I've
> understood it should use the snd-hda-intel for sound and eve
matthieu castet wrote:
> Hi,
>
> I am using 2.6.25 and SBLive! Value [CT4670].
> The card works, I got sound. But the mixer do nothing. No mute, no sound
> level.
>
> What can I do to make the mixer work again ?
>
>
> Matthieu
>
> PS : I am on debian unstable
>
>
Is it possible you are using a
Constant Brouerius van Nidek wrote:
> Well it interrupts Skype. Five to ten overruns and than I am out of Skype,
> aborted..
> Do not know if I can influence the Alsa settings. Looking into the Skype
> sound
> setup II found that incomming, outgoing and ringing have each 7 choices. Do
> not kn
> Default device
> Sound Fusion CS46xx (hw:CS46xx.0)
> Sound Fusion CS46xx (plughw:CS46xx.0)
> Sound Fusion CS46xx (hw:CS46xx.1)
> Sound Fusion CS46xx (plughw:CS46xx.1)
> Sound Fusion CS46xx (hw:CS46xx.2)
> Sound Fusion CS46xx (plughw:CS46xx.2)
>
> Could intensive playing with these choices do som
On Monday 16 June 2008 17:33, Paolo Saggese wrote:
> Current Lenny's Kernel (2.6.24) provides ALSA 1.0.15, while
> the 2.6.25 provides 2.6.25 (when Lenny will be released this
oops... of course I meant "2.6.25 provides ALSA 1.0.16".
Ciao,
Paolo.
--
Skype: Paolo.S
On Saturday 14 June 2008 15:40, Philippe MONROUX wrote:
> Lenny don't solve the problem...
try kernel 2.6.25 from Sid. You can download the linux-image-,
linux-headers- and linux-kbuild- .deb files and install them
with "dpkg -i ..." on Lenny without dependency problems.
Current Lenny's Kernel
Well it interrupts Skype. Five to ten overruns and than I am out of Skype,
aborted..
Do not know if I can influence the Alsa settings. Looking into the Skype sound
setup II found that incomming, outgoing and ringing have each 7 choices. Do
not know what they mean and I am still looking into wha
Well, I could imagine your low memory has an impact on that but I cannot tell
for sure. Do you have another machine to doublecheck ?
Anyway, in order to increase the buffer size you´d need to touch the ALSA
settings how your soundcard is initialized but if the the application you're
using doesn
Hi Alex, Thanks for the answer. Run my system now only with gstreamer,
gstfakevideo and Skype on Blackbox. System PIII. Nothing else is running.
Still there, the overrun.
If you say system, which part of my computer is in problems. Could it be my
too low memory? To increase the buffersize shoul
Hi,
you get buffer under- and/or overruns if your system has trouble with the
performance required for the current audio settings.
I would recommend to shut down any other process and check whether this buffer
problem remains or increase the buffer size if you have the possibility.
HTH
-- A l
22 matches
Mail list logo
