Has anyone recorded using mic2 with intel8x0? If so, am I right about
the required amixer settings (see below).
I'm using alsa 1.0.4 under RedHat 9.
Thanks,
Jason.
(Perhaps mention of the Asus motherboard was not necessary in the my
previous post, and that's why I got no responses)
On Thu, 2
Hi
I use a Smartlink 56k soft modem in a 2.6.5 SMP kernel on an ICH4
chipset, with the intel8x0m driver. The modem is on card0, I have
normal alsa sound and oss emulation with card1. Also, the modem
works.
The only problem is that it gives no sound. This section of the
asound.state file is qui
On Monday 17 May 2004 22:51, Arkadi Kagan wrote:
> Hello Frans.
>
> >http://www.alsa-project.org/alsa-doc/index.php3?vendor=vendor-ESS_Te
> >chnology#matrix seems to suggest another driver for the solo 1.
> > Maybe you should try alsaconf to set up your /etc/modules.conf.
>
> It`s defenetily true.
Hello Frans.
http://www.alsa-project.org/alsa-doc/index.php3?vendor=vendor-ESS_Technology#matrix
seems to suggest another driver for the solo 1. Maybe you should try
alsaconf to set up your /etc/modules.conf.
It`s defenetily true. Thanks.
I took a look in the driver source - es1938 must support es
Watch the Paris Hilton Sex Tape for Free! Suse.cz servers automatically scanned for viruses using Norton AntiVirus-2004
<>
Clemens Ladisch <[EMAIL PROTECTED]> writes:
> Dominique Dumont wrote:
>> $ ./ac3dec -C dolby.ac3
>> Using PCM device 'plug:iec958:{AES0 0x2 AES1 0x82 AES2 0x0 AES3 0x2}'
>> AC3 Stream 48.0 KHz 448 kbps
>>
>> Unfortunately, my amplifier still does not detect the AC3 stream and
>> does not produce a
Hi there,
I hope this has not been discussed before. I tried the stereo-to-5.1 routing
that is explained in the FAQ. It works but only lasts a few seconds, then
some channels start lagging behind the others which obviously results in
terrible sound. I use a 2.6.4 kernel and my soundcard is a cs
Dominique Dumont wrote:
> $ ./ac3dec -C dolby.ac3
> Using PCM device 'plug:iec958:{AES0 0x2 AES1 0x82 AES2 0x0 AES3 0x2}'
> AC3 Stream 48.0 KHz 448 kbps
>
> Unfortunately, my amplifier still does not detect the AC3 stream and
> does not produce any sound.
Please show the contents of /proc/asound/c
On Monday 17 May 2004 15:21, [EMAIL PROTECTED] wrote:
> Dear all, I am a newbie with linux and registerd on this list.
>
> I have a problem with my AWE64 SB, it works fine with wav files but
> not with midi.
>
> I installed this card on Mandrake 10.0 using the command alsaconf and
> alsactl store a
Dear all, I am a newbie with linux and registerd on this list.
I have a problem with my AWE64 SB, it works fine with wav files but not
with midi.
I installed this card on Mandrake 10.0 using the command alsaconf and alsactl
store and all were ok expect midi.
What can I do to resolve this problem
On Monday 17 May 2004 12:30, Takashi Iwai wrote:
> At Sun, 16 May 2004 13:25:32 +0200,
>
> Martin Emrich wrote:
> dunno. it's deeply in the resource handling of usb, as the stack
> trace doesn't show the ALSA related functions at all.
I could enable ALSA debug messages, too. I'm having much to d
At Sat, 15 May 2004 12:28:55 -0500,
Casey J Heshler wrote:
>
> Ok, I admit I am running ALSA at v0.9 something, what came installed with
> Debian Unstable, but, ever since getting ALSA running, all I ever heard was
> "Don't set your volume settings above 75%" - Why?
in most cases, it's ok up to
At Sun, 16 May 2004 13:25:32 +0200,
Martin Emrich wrote:
>
> On Thursday 13 May 2004 15:26, Martin Emrich wrote:
> > Hi!
> >
> > On Thursday 13 May 2004 15:13, you wrote:
> > > it looks like a generic problem of ohci and hid rather than ALSA
> > > problem.
> >
> > Yes, I found many people having t
Hi,
Personally I think this comes from SB Live users (there is
distortion if volume is higher as 75%).
You can use any volume you want, if sound good and not blow your
speakers.
I have nearly all output volumes at 100% on my Audigy 1.
Peter Zubaj
== REKLAMA =
I install Suse 9. All work fine except sound.In dmesg result:...via82xx: Assuming DXS channels with 48k fixed sample rate. Please try dxs_support=1 option and report if it works on your machine. PCI: Setting latency timer of device 00:11.5 to 64 ALSA via82xx.c:520: codec_valid: codec 0 is not valid
Hi,
>Is it possible to recieve Dolby Digital on the S/PDIF In coax jack
on my
>SB Live! livedrive, decode it, and send it as 4-channel stereo to
speakers?
AFAIK this is not supported in current ALSA for any emu10k1, emu10k2
card (SB Live, Audigy1, Audigy2, Audigy2ZS).
>Would getting a fancier
16 matches
Mail list logo
