hallo,
i am using the SB Extigy. It works (records + plays in 48 kHz).
After i cvscompiled the source of february the 17,
the card is listed as a MIDI-device, but does not produce any midi-sound.
How do i load MIDI-Patch files onto the Extigy?
For the SBLive, there is a tool called sfxload.
g.
Olaf,
Are you sure the firmware patch applies to the 8x8?
I believe it applies to the 2x2 and 4x4 which if I
recall from reading mailing list posts both have the
same chipset. I don't recall the 8x8 being mentioned
as having that same chipset. Am I unaware of somthing?
I also have an 8x8 and so
On 12-Feb-03, Bob van der Poel wrote:
> I have the tape deck plugged into the LINEIN jack and have, according
> to alsamixer the following enabled:
>
> Master, PCM, Line
>
> Everthing else is muted. Well, except for the first 2 3D contors, and
> the Capture, Mix and Mix Mono to the far right
On 14-Feb-03, Karsten Jeppesen wrote:
>> I downloaded alsa-utils-0.5.10.tar.bz2, alsa-driver-0.5.12a.tar.bz2,
>> and alsa-lib-0.5.10b.tar.bz2
One suggestion - if you're doing any sort of development work which
depends on ALSA, you really should be using the 0.9 release, since the
API has changed,
i have redhat 7.3 with alsa 0.9 and i run a terratec
ews88mt/ice1712/envy24 as pci-soundcard(the analog devices are not
working yet, but that is another problem...) and the midisport 8x8 as an
usb midi-interface
and i do not get the midi interface to work. would could i have done
wrong ? i thing t
when I try to play something like
aplay /usr/share/sounds/pop.wav
I get:
Playing WAVE '/usr/share/sounds/pop.wav' : Signed 16 bit Little Endian, Rate
44100 Hz, Mono
ALSA lib pcm_hw.c:481:(snd_pcm_hw_drain) SNDRV_PCM_IOCTL_DRAIN failed:
Input/output error
Where is my fault?
My configuration, De
Nobody can be told what the matrix says.
You have to experience it for yourself.
- Original Message -
From: "T.P. Reitzel" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, February 16, 2003 2:50 AM
Subject: [Alsa-user] Turtle Beach Santa Cruz
> Hi,
>
> After pondering the sit
Hi,
Having downloaded alsa-driver, alsa-lib, alsa-utils (all 0.9.0rc7), I
compiled and inserted the driver, with seemingly no errors. The same
happened with alsa-lib and alsa-utils. Everything seems to work fine,
and lsmod shows up with snd-via82xx. alsamixer lets me unmute and set
the channel vo
>Hello,
>I've updated my system with the cvsexport 2003-02-08 version
>System: shuttle MV42N motherboard with a VT8233 chip (ac97 codec)
>System: Debian, kernel 2.4.20-686 P4 celeron 1700 Mhz.
>No codec_ready: codec 0 errors any more in dmesg.
>In dmesg i get the following message:
>devfs-regist
Benny Morgan wrote:
[snip]
I would suggest you to test the current CVS.
Sorry, but latest CVS does not work. Sound is still very distorted. CVS
from 2002-12-09 12:00 works well though, which is what I'm using now :)
It is using version 1.37 alsa-kernel/pci/cs46xx/cs46xx_lib.cc.
Cheers,
Joha
El sábado 15 de febrero de 2003 a las 15:45:16, Matt Bergin escribió:
> Having downloaded alsa-driver, alsa-lib, alsa-utils (all 0.9.0rc7), I
> compiled and inserted the driver, with seemingly no errors. The same
> happened with alsa-lib and alsa-utils. Everything seems to work fine,
> and lsmod
In mailing lists, usenet and the ALSA bug tracking system,
(Bmany users have reported failing to get sound
(Boutput because of a mixer error:
(B
(B $amixer
(B
(B amixer: Mixer attach default error: No such file or directory
(B
(B $amixer -c 0
(B
(B ALSA lib control.c:588:(snd_ctl_
12 matches
Mail list logo
