When an airFiber radio has signal issues and modulates all the way down to
1x, it stops using chain 1 (hence the signal level drops). It may be that
there is some issue causing that direction to modulate down to 1x?
On Fri, Aug 23, 2019 at 8:40 AM Ken Hohhof wrote:
> Not AF24 specific, but absen
Not AF24 specific, but absent any other information, I always change the xmt
side first. Losing 20-30 dB sounds like a blown xmt power amp. Totally
deaf could be either side.
But maybe someone can add info about typical AF24 failure modes that would
supersede this.
-Original Message-
F
So oddly enough try reversing the frequencies on the two radios and see if the
issue goes away, you may have lost some kind of a preamp or other device that’s
only in one direction or one frequency.
I have seen that before.
> On Aug 23, 2019, at 8:18 AM, Nate Burke wrote:
>
> I have an AF24 L
