So I changed all the settings I could think of, but it was still
blocking the customer from 3-16 hours after rebooting the AP. Strange
thing is that the customer Router would continue to ARP just fine, but
would not pass any traffic. I changed the 2.4ghz 1k radios out to 5ghz
F300-16 radios, a
K..
Possibly, Drop one of the option 82 on the Closest Ap to the server.
Check the firewall settings int he 1K devices to be sure nothing is
being dropped.
Sounds like a broadcast isolation issue or some kind of security measure
turned on by default.. We used to run in to this with the 1k devi
That is the correct layout.
Wouldn't enabling DHCP Below sub just be if there was a DHCP Server on
the 1K system? DHCP Works, it just randomly stops working, and
rebooting the EPMP1k AP brings it back.
I saw this one other time when I tried to enable Option 82 on an FSK
AP. Same things hap
So to understand what you have is a 3kAP-->300sub--Switch--1KAP--->1kSub
correct?
If this is correct then try this..
Ensure that you have allow Dhcp below sub on the 300 to allow those
responses to relay to 3kAP
On 9/20/20 11:39 AM, Nate Burke wrote:
I'm running into a strange issue that's
I can set up a screen share some time and show you
the routers where this is set up.
Thanks,
David Coudron
From: AF On Behalf Of Ryan Ray
Sent: Monday, September 21, 2020 1:41 AM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] EPMP and Nested DHCP Option82
Can you explain how
-Original Message-
>
> From: AF On Behalf Of Nate Burke
>
> Sent: Sunday, September 20, 2020 11:40 AM
>
> To: Animal Farm
>
> Subject: [AFMUG] EPMP and Nested DHCP Option82
>
>
>
> I'm running into a strange issue that's being difficult to replicate.
Do you have a limit on the number of bridged MAC addresses in the 300 SM?
On 9/20/2020 12:39 PM, Nate Burke wrote:
I'm running into a strange issue that's being difficult to replicate.
EPMP 3k AP W/option82 -> EPMP 300 SM -> Switch
Local Customer and EPMP1000 radio plug into this switch
EPMP
-
From: AF On Behalf Of David Coudron
Sent: Sunday, September 20, 2020 2:11 PM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] EPMP and Nested DHCP Option82
I might be mis-remembering how our stuff is set up, but I don't think the
Mikrotiks write anything back to Sonar. Basi
Option 82.
David Coudron
-Original Message-
From: AF On Behalf Of Nate Burke
Sent: Sunday, September 20, 2020 1:58 PM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] EPMP and Nested DHCP Option82
No Preseem, and Sonar is only the receiver of the Data from The Mikroti
ptember 20, 2020 1:48 PM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] EPMP and Nested DHCP Option82
Hmm, I just had it happen again with Option82 in the EPMP1000 AP turned off.
Maybe there's something else going on. Still, rebooting the
EPMP1000 AP is the only thing that fix
ome issues.
Regards,
David Coudron
-Original Message-
From: AF On Behalf Of Nate Burke
Sent: Sunday, September 20, 2020 1:48 PM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] EPMP and Nested DHCP Option82
Hmm, I just had it happen again with Option82 in the EPMP1000 AP
well.
David Coudron
-Original Message-
From: AF On Behalf Of Nate Burke
Sent: Sunday, September 20, 2020 11:40 AM
To: Animal Farm
Subject: [AFMUG] EPMP and Nested DHCP Option82
I'm running into a strange issue that's being difficult to replicate.
EPMP 3k AP W/option82 -> EPMP 300
e access to the Internet.This
seems to work pretty well.
David Coudron
-Original Message-
From: AF On Behalf Of Nate Burke
Sent: Sunday, September 20, 2020 11:40 AM
To: Animal Farm
Subject: [AFMUG] EPMP and Nested DHCP Option82
I'm running into a strange issue that's bei
I'm running into a strange issue that's being difficult to replicate.
EPMP 3k AP W/option82 -> EPMP 300 SM -> Switch
Local Customer and EPMP1000 radio plug into this switch
EPMP1000 2.4 AP (nonGPS w/Option82) -> EPMP1000 2.4SM
I'm using Option 82 so that Sonar can Tie the Public IP Address to
14 matches
Mail list logo
