Hi all,
To move data from a primary storage pool to another primary storage
pool, you can use the command 'move nodedata'. But how can you move data
from a copy storage pool to another copy storage pool? I have to move
data from 3590 tapes to 3592 tapes. I know I can delete volumes from the
copy s
Hi all,
We have a VMware vSphere environment with 246 virtual machines. We have 4
datamovers to do backups with TDP for VE.
In the client schedule we define the command:
-vmfulltype=vstor -vmbackuptype=fullvm -asnodename= -domain.vmfull="VM=" -MODE=IFIncremental
This command is limited
Hi all,
We administer a vSphere 5.5 environment using TDP for VE as our backup
solution. TDP for VE uses CBT to make incremental-forever backups of our VMs,
meaning that it only backs up the entire VM once; all subsequent backups are
incrementals. We backup our VMs once a day. We are currently
ackup using the backup archive client might also exclude other
> data (from the local include exclude list or a server client option
> set) that you might need to take into account.
>
> Regards,
>Stefan
>
>
>
> On Fri, May 29, 2015 at 4:51 PM, Meuleman, Ruud <
>
Hi,
I had the same problem. You can solve this by installing the packets
tivoli.tsm.msg.en_US.devices and tivoli.tsm.msg.en_US.server via
"Install and Update from ALL Available Software".
With regards,
Ruud Meuleman
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTEC
Hi Troy,
I use the following TSM command if the tape are already labelled:
checki libv search=y stat=scr checkl=n devt=3592
With regards,
Ruud Meuleman
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Troy Allen Cross (YSU)
Sent: Thursday, Septe
Hi Troy,
I think you have to label the tapes:
labe libv checkin=scr
With regards,
Ruud Meuleman
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Troy Allen Cross (YSU)
Sent: Friday, September 28, 2007 7:49 PM
To: ADSM-L@VM.MARIST.EDU
Sub
Hi,
In our TSM environment we use two locations that are about 30 km away
from each other. On both sides we use TSM servers and 3592 tapedrives.
We use SAN and DWDM between the two locations. Writing data from a TSM
server to a tapelibrary that are on the same location have the speed
according the
a 2Gb/sec connection is closer to 200MB/sec.
Andy Huebner
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Meuleman, Ruud
Sent: Wednesday, February 10, 2010 9:43 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Tapedrive 3592 E06 speed of 160MB/sec
rt OFF
Disabled E_Port OFF
ISL R_RDY ModeOFF
RSCN Suppressed OFF
Persistent DisableOFF
NPIV capability ON
"Meuleman, Ruud"
To
Sent by: "ADSM: ADSM-L@VM.MARIST.EDU
Hi all,
A tape written by TSM isn't readable by TSM anymore. Now we have
installed the tool TSMtape on a Linux server. After using the command
"/usr/local/bin/tsmtape0.1/TSMtape -v -A /dev/nst0 filelisting"
there is only the following line in the file filelisting:
/usr/local/bin/tsmtape0.1/TSM
2:54 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Reading tape without TSM
On Jun 17, 2011, at 8:41 AM, Meuleman, Ruud wrote:
> Hi all,
>
> A tape written by TSM isn't readable by TSM anymore. ...
This begs the question as to whether the tape is readable at all.
See if yo
be the tape that is bad, per se: one drive may be acting up,
which may have affected a number of tapes: such tapes might be quite
usable with drives that are in good condition.
Richard Sims
On Jun 17, 2011, at 9:32 AM, Meuleman, Ruud wrote:
> The tape where the copy is, isn't also r
irmware were updated recently,
review that. Turning on TapeAlert may help, going forward. At this
point it's a matter of finding out how much damage there is, and
isolating a cause...
Richard Sims
On Jun 17, 2011, at 10:38 AM, Meuleman, Ruud wrote:
> "move data" in severa
Hi,
We are going to configure datamover for backup with ndmp. Where do I
have to define the datamover? TSM Library Manager or TSM Library Client?
Kind Regards,
Ruud Meuleman
**
This transmission is confidential and must n
All,
We have to move about 150 TB backup data from one TSM LC to an other. Using
command "export node filedata=all toserver " will take
months.
Does anybody knows if it is possible to export the metadata of backupdata from
one LC to an other and update the owner of the volumes on the LM? The
t set up 2 instances on
the target machine, without needing to get all the metadata in one DB.
Can you tell us why you are doing this?
Folks might have some more creative solutions.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Meuleman,
All,
One can make TSM database backups within the TSM application (ba db
dev= t=f), since version 6 one can make also a db2 backup of it (db2
backup db tsminst1 online use tsm).
Does anybody knows if there are advantages of making db2 backups compared to
TSM database backups?
Kind Regards,
Ru
Hi All,
Does anybody knows if it is already is possible to make incremental NDMP backup
with TSM, beside full and differential backup?
Is it possible to set environment variables base_date and dump_date from a TSM
server and making incremental backup?
Kind Regards,
Ruud Meuleman
*
Hi,
Does anybody knows what are the advantages and disadvantages of using virtual
tape library instead of "normal" disks for TSM storage pools?
Kind Regards,
Ruud Meuleman
**
This transmission is confidential and must not be u
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Meuleman, Ruud
Sent: Tuesday, November 05, 2013 10:21 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] virtual tape library versus disk
Hi,
Does anybody knows what are the advantages and disadvantages o
21 matches
Mail list logo
