We have two Dell NDMP storage devices and a TSM server at both sites. We'd like
to be able to root file level (image backups don't help much) backups (and
restores if necessary) of the entire NDMP device to the local TSM server. Can
someone point me in the right direction or tell me how they di
Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Dury, John C.
Sent: Thursday, February 13, 2014 2:11 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: [ADSM-L] file system backups of a Dell NDMP Equallogic device
We have two Dell NDMP storage devices and a TSM server at both sites. We
This is a weird one and I have opened a pmr with IBM but I thought I would
check with you all and see if anyone had any ideas what is going on.
I have a TSM 6.3.4.300 server running on RHEL5 with all the latest maintenance
installed, and when I try to connect to it via an admin session, either lo
-l@vm.marist.edu&q=date:20140331>
Hello,
On Mon, Mar 31, 2014 at 09:00:10AM -0400, Dury, John C. wrote:
> This is a weird one and I have opened a pmr with IBM but I thought I would
> check with you all and see if anyone had any ideas what is going on. I have
> a TSM 6.3.4.300 serv
I apologize in advance but I'm just getting more frustrated. I've installed
both the windows and linux version of TSM Admin Center 6.3.4.300 and both
seemed to install correctly with no errors. After correctly logging in, I can't
add a TSM server under the "Manage Server" option. I've tried 4 di
under 1 nodename so
that it's easy to find them at restore time.
W
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Dury, John C.
Sent: Friday, February 14, 2014 3:46 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [
I have been trying to get this to work for days now and I don't seem to be
making any progress. I have tried all kinds of options in both the dsm.opt and
tdpexc.cfg files and I get various messages. The documentation in the TDP for
Exchange manual on doing replica backups is not very detailed at
can help you get the configuration working. Del
"ADSM: Dist Stor Manager"
wrote on 10/31/2014 08:40:00 AM: > From: "Dury,
John C." > To: ADSM-L AT VM.MARIST DOT EDU > Date:
10/31/2014 08:42 AM > Subject: Anyone else doing replica backups of exchange
datastores?
st Stor Manager"
wrote on 10/31/2014 02:47:25 PM: > From: "Dury,
John C." > To: ADSM-L AT VM.MARIST DOT EDU > Date:
10/31/2014 02:49 PM > Subject: Re: Anyone else doing replica backups of
exchange > datastores? Need some help please. > Sent by: "ADSM: Dist S
Long story short, I have a full DB backup taken on a linux system running TSM
6.3.4.300 with the DB in roll forward mode. The DB is spread across 4 different
dbdirs file systems. One of the file systems became corrupt and I need to
recover the DB from the full backup.
I have the dbdirs file syst
The issue was that I needed a way to recreate the actual files in the dbdirs.
It is fixed now.
Original Message
From: Erwann Simon
Sent: Mon, Nov 24, 2014 12:42 AM
To: ADSM: Dist Stor Manager ; Dury, John C.
CC:
Subject: Re: [ADSM-L] recovering a DB from full backup when one of
I have a 6.3.5.100 Linux server and several TSM 7.1.0.0 Linux clients. Those
linux clients are dumping several Large Oracle databases using compression, and
then those files are being backed up to TSM. Because the files are compressed
when dumped via RMAN, they are not good candidates for dedupe
n just=
change the destination storage pool for that class to go to a non-duplicat= ed
storage pool.
..Paul
(sent from my iPhone)
On Aug 2, 2015, at 11:07 AM, Dury, John C. mailto:JDury=
@DUQLIGHT.COM<mailto:jd...@duqlight.com%3cmailto:JDury=%2...@duqlight.com>>>
wrote:
I have
We have 2 storage pools. A BACKUPPOOL and a DEDUP pool. All nightly backups
come into the BACKUPPOOL and then migrate to the DEDUP pool for permanent
storage. All volumes in the DEDUP pool are showing FULL although the pool is
only 69% in use. I tried doing a move data on a volume in the DEDUP p
: Rettenberger Sabine [mailto:sabine.rettenber...@wolf-heiztechnik.de]
Sent: Wednesday, January 13, 2016 10:35 AM
To: ADSM: Dist Stor Manager
Cc: Dury, John C.
Subject: AW: All volumes in STGPOOL show as full. Please help.
Hi John,
did you try a RECLAIM at the DEDUP-Pool to get the volumes free?
What says
We do not have a backup of the DEDUP pool but it is being replicated to a
different TSM server. The copy stgpool option is disabled.
John
-Original Message-
From: Stef Coene [mailto:stef.co...@docum.org]
Sent: Thursday, January 14, 2016 8:54 AM
To: ADSM: Dist Stor Manager; Dury, John C
Anyone have any idea how to query a TSM server (v6 or v7) to find what backup
schedules a node is associated with? I'm trying to do the reverse of a "q
assoc" command and looking for way to supply a node parameter to a script and
have the TSM server tell me it is in the following list of schedu
We have two TSM v7.1.7.0 server running on different RHEL 7.x servers. The
primary storage pool is BACKUPPOOL which has it's volumes in the local OS
mounted as NFS volumes across a 10g network connection. The volumes live on the
Data domain which does it's own deduplication in the background. We
We continue to see this on all 4 TSM 7.x servers. I do not see this behavior on
the TSM 6.x servers at all. Anyone else running TSM 7.x on RHEL 7.x?
The /tsmactivelog/NODE/LOGSTREAM/S0018048.LOG is open simultaneously a
total of 386 times. This can't be normal behavior.
We have two TSM
) and SATA (storage pools). No
deduplication.
We haven't yet placed a support call with IBM about the variance in DB
backup times, but intend to.
--
Graham Stewart
Network and Storage Services Manager
Information Technology Services
University of Toronto Libraries
416-978-6337
On 12/06/2016
We are currently running TSM server v5530 under AIX. The AIX server has a
mixture of different speed (266mhz and 133mhz, both 64bit) PCI-X slots. With 4
4g HBAs. Our system is connected to a Clariion CX3-80 where the TSM DB and
Recovery Log and Disk Storage pools live. The disk parts of TSM have
I've been fighting this for several weeks now and I'm getting very frustrated.
I have several windows 2003 clients that consistently get the errors listed
below. I've done some research and installed the following patches as per
recommendations from several others and nothing seems to fix the er
We have about 500 nodes and have a backup windows from 5pm until 7am. I have
our backup schedule setup so that about 30 nodes do incremental per hour with a
few exceptions. We have a 3T disk storage pool and 4 LTO4 drives in our tape
library. Our dbbackuptrigger is set at logfull 30% and numinc
First, I want to thank all of you for your replies. I definitely got some good
ideas and have some things to look at. I'm going to make some changes to where
the DB and rec log are stored. Right now, they are in the same RAID 1 Group
with 2 133g drives. I created a new lun of 6 133g drives setu
We have a 3 TB disk storage pool that until recently, has been filling up
partially during backups, and then emptying as the data is migrated to tape.
The storage pool is now at 84% and climbing. I have 4 LTO4 Ultrium drives that
can't seem to migrate the data fast enough at all. Watching nmon,
We have an STK SL500 tape library with 4 LTO4 drives in it and it seems to
randomly take all of the drives offline. STK/Sun has replaced the robot and
controller card (more than once) and nothing seems to help. This has been going
on for several months now and I'm at a loss to figure out what is
We have an AIX server running TSM server v5.5.4.0 that is attached to two tape
libraries, one remote and one local. The tape libraries are both STK SL500
libraries with 4 LTO4 drives in each. The remote library is configured as a
copy storage pool. Several times through the day, we run "backup s
We back all of our nightly data up to an SL 500 LTO4 tape library and then
during the day, that cloud of data is also copied to another SL500 LTO4 tape
library at a remote location. The backup storage pool is taking a significantly
long time to run and appears to be running for a long time becau
Ignore this. I got lucky and querying the contents of the volumes in use shows
only 1 file. I was expecting it to be much larger since these are LTO4 drives
and can hold lots of data.
From: Dury, John C.
Sent: Wednesday, November 03, 2010 4:37 PM
To: ADSM-L (ADSM-L@VM.MARIST.EDU)
Subject
We purchased an STK SL500 tape library with 4 LTO4 drives in it a few years ago
and we have had nothing but problems with it, almost from the beginning. It is
fully loaded with LTO4 cartridges (about 160) and seems to randomly just crash
and take all of the drives offline to TSM. We also have a
I'll try to answer your questions but there were a lot! The drives in both
libraries are IBM LTO4 drives. Both libraries currently have different version
library code although the faulty library has been upgraded several times to
different versions as they were available, and the problem still o
Our current environment looks like this:
We have a production TSM server that all of our clients backup to throughout
the day. This server has 2 SL500 tape libraries attached via fiber. One is
local and the other at a remote site which is connected by dark fiber. The
backup data is sent to the r
I have 2 sl500 tape libraries attached via dark fiber (which doesn't appear to
be getting anywhere close to the speeds it should but that's another issue) to
an AIX TSM 5.5 server. One is copy storage pool and the other a primary. I
backup the primary to the copy storage pool daily. This proces
I am planning on upgrading our TSM server from v5.5.5.2 to v6.3.2 this weekend.
I have checked and all of the prerequisites are in place and I think I am
ready. My only question is, we currently have the v5 database in several
directories that have several .DSM files in them but also have lots
ystem.
Please post if this works, I am sure others would be interested.
Andy Huebner
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Dury, John C.
Sent: Friday, August 17, 2012 11:06 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: [A
We have 2 datacenters and plan on having a tsm server at each site. Every
client will backup all o the nodes at that site to the tsm server at that site
and then replicate their data to the server at the other site. Both servers are
running tsm 6.3.2. One is aix and one is linux. The linux serve
remove the REPLNODE: remove replnode NODENAME from both
servers (source and target)
Before you can remove the node
Regards Robert
--
Date:Wed, 3 Oct 2012 17:34:22 -0400
From: "Dury, John C."
Subject: define server for replication
We have 2 dat
Please ignore my previous post about trying to def a target server to source
server and it failing. It looks like it works even though I still can't ping
the target server from the source server. The replication works correctly
though.
A brief description of our environment. We have 2 datacente
need first to remove the REPLNODE: remove replnode NODENAME from both
servers (source and target)
Before you can remove the node
Regards Robert
--
Date:Wed, 3 Oct 2012 17:34:22 -0400
From:"Dury, John C."
Subject: define server for replication
We have
ot;
Hi,
Define server uses servername and serverpa to validate where as ping uses admin
name and pass to validate session. Make sure the admin and pass on server where
you issue the ping also is avail on the server you ping to.
Kind regards,
Karel
- Oorspronkelijk bericht -
Van: Dury, Jo
We are changing our backup system and plan on using a Dell MD3260 as a primary
disk storage device. It will house all backups from the local site as well as
replicated data from the remote site. It will function as a primary stgpool
only. The tape library that is also attached will eventually b
Way back when we had 1 TSM server at v5.x, we asked IBM several times if there
was a way to migrate a TSM server to a different platform (AIX --> Linux) and
they said "no". So we came up with a strategy to install a 2nd TSM server
(Linux) at our alternate site and then have all local clients ba
I have an AIX server with TSM 6.3.4.0. Expiration is set to run at 2am and
seems to get so far and then hangs. But what's odd is that is also seems to
only process some of the nodes but not all. For example, I have it running now
and it seems to be stuck:
1 Expiration Processed
s or less. The current one has been running for a few hours
and is still hung at 462 out of 595 nodes and the number of objects hasn't
changed.
From: Dury, John C.
Sent: Friday, August 09, 2013 12:03 PM
To: ADSM-L (ADSM-L@VM.MARIST.EDU)
Subject: expire inventory seems to be hanging and not
We have 2 6.3.4.0 TSM servers, one AIX and one linux. We want to move all of
the data from the AIX server to the linux server and then eventually retire the
AIX server. I understand I can also do this with replication, but because the
lijnux server will eventually be replicating to a second linu
node toserver=LINUXSERVER filedata=all replacedefs=no mergefilespaces=no
export node toserver=LINUXSERVER filedata=all domain=standard
- Didn't notice the actual EXPORT command/options you used?
On Wed, Sep 11, 2013 at 8:30 AM, Dury, John C.
wrote:
> We have 2 6.3.4.0 TSM servers, one
I found the problem. There was a leftover replicated node from previous
testing, with the same name. Replicated nodes don't show up when doing a "q
node" so I wasn't seeing it on the new server.
Thanks for the fresh eyes.
From: Dury, John C.
Sent: Wednesday, September 11, 20
That is exactly what I am trying to do.
John
- What happens if you specify a specific node name that hasn't been exported
- yet?
On Wed, Sep 11, 2013 at 12:20 PM, Dury, John C.
wrote:
> I have tried several combinations of the following and they all fail with
> the output l
48 matches
Mail list logo
