Good Morning.
I have the following question:
We have 2 SAP-Servers that will go out of production and where the hardware
will be used for other things.
We keep our SAP-data for 30 days.
The two servers are out of productoin already, because I received the mail
about this a week after they did t
Hi fellow tsm'ers..
We have a linux file server that automounts filesystems via NFS. If
there is a symbolic link from one of the local filesystems to a
automount-filesystem, this automount filesystem seems to get mounted
when 'dsmc' is doing its daily backup. 'dsmc' seems to be following
the symbo
hi Steve Harris：
I feel is very strange why the tape can only have about 100gb content。And why TSM
can't know the tape is full now。I can define a new volume and change the maxscratch
of the pool，but the volume's status is filling,next time TSM will still get this
volume to store the archived
Hi all,
I have problem with running backup of DB2 backup database of SAp system on
AIX. I am not AIX guru so, please, dont shoot me :-)). I have shell script,
backupon.sh for online backup of database with this contens:
#!/bin/sh
su - devadm "-c db2 backup db DEV online use tsm"
Backup works fin
Hi there,
we're using TSM 5.2.2.2 on AIX 5.2. The client is at 5.2.2.5, also on AIX
5.2. (Both 64 bit)
I cloned a machine using mksysb. On the clone, I changed the IP address.
I accidentally started the dsmcad process with an unchanged configuration.
This caused the TSM server to update the infor
Yes I Do
Ronald
-Ursprüngliche Nachricht-
Von: Stapleton, Mark [mailto:[EMAIL PROTECTED]
Gesendet: Donnerstag, 22. April 2004 22:35
An: [EMAIL PROTECTED]
Betreff: Re: bad performance on web administration tool under ITSM V5.2.2.3
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]
Hi there,
I also had a problem with running tsm scheduler in the background, this is
the command I run
type at now and enter
now type : dsmc sched >/dev/null 2>&1 and enter
then ctrl d (to put job in the background)
Hope this helps.
Regards.
Lindy
-Original Message-
From: Tomáš H
>I have problem with running backup of DB2 backup database of SAp system on
>AIX. I am not AIX guru so, please, dont shoot me :-)). I have shell script,
>backupon.sh for online backup of database with this contens:
>
>#!/bin/sh
>su - devadm "-c db2 backup db DEV online use tsm"
>
>Backup works fine
>hi all when I do backup operation anything is OK but everytime I try to archive
>something I get the same error
>04/19/04 17:34:16 ANR8341I End-of-volume reached for LTO volume 716ADM.
Refer to Chapter 1 in the Messages manual, which explains that the 'I' after
the number in a message ID mean
>hi all when I do backup operation anything is OK but everytime I try to
>archive something I get the same error
>04/19/04 17:34:16 ANR8341I End-of-volume reached for LTO volume 716ADM.
>
>04/22/04 18:30:21 ANR8341I End-of-volume reached for LTO volume 715ADM
>
>q vol output as follow=20
>7
To answer the various responses related to my question:
Yes, I personally physically labeled the tapes (both sticky external and
electronic internal). These tapes were not pre-labeled, AFAIK.
While I have run the physical diagnostics from the control panel, I have
not run the tapeutil tests from
Ref Linux ES 2.1 TSM 2.2.3 server upgrade from TSM 2.2.2, I got this on restart of
dsmserv at 2.2.3. I didn't save a snapshot, only printed it.
0x0808f411 cuserid@@GLIBC_2.0+0x61
ANR7823S Internal error TBUNDO012 detected.
ANRD
ANRD DbRestartRecovery
ANRD
ANRD 0x0808f411 cus
I am looking for documentation that describes how to install Tivoli Storage Manager
Version 5.2 for Windows in a Microsoft Windows 2003 Cluster environment.
The only documentation that I have been able to find is the Redbook "Using Tivoli
Storage Management in a Clustered Windows NT Environment"
Richard you are THE man!!
Thanks!!
-Original Message-
From: Richard Sims [mailto:[EMAIL PROTECTED]
Sent: Thursday, April 22, 2004 9:00 PM
To: [EMAIL PROTECTED]
Subject: Re: Show commands
>Does anyone know where I can find a list of the "show" commands in TSM?
Then you obviously don't kn
See the info below for the information on Operational Reporting:
ftp://service.boulder.ibm.com/storage/tivoli-storage-management/maintenance/server/v5r2/WIN/LATEST/
Look for the package name as tsmcon5220_win.exe. This is included with
the TSM server on windows and that because of that the sta
>Richard you are THE man!!
I am a man. Best not to elevate expectations, I've found. :-)
Richard
Hi everybody,
I am trying to write a little script to prepare daily report about ORACLE backups. We
are using TDP for ORACLE.
The idea is very simple. For every TDP node I do first "dsmc q f -virtualnode=XXX
-passw=YYY"
The next thing is "dsmc q b -virtualnode=XXX -passw=YYY"
And here is a prob
From: ADSM: Dist Stor Manager on behalf of Yury Us
>The idea is very simple. For every TDP node I do first "dsmc q f -virtualnode=XXX
>-passw=YYY"
>The next thing is "dsmc q b -virtualnode=XXX -passw=YYY"
>And here is a problem. dsmc version of 5.2 for windows works ok for windows nodes,
>but n
I had a working, clustered TDP Exchange scheduler. Due to an issue, I
had to reset the password on the node. Since doing that, I have been
unable to get the service to run again. The service will start briefly
and then stop. The Event Log shows first a warning ID 4098 (Error
initializing TSM ap
No extra cost, it's part of the package now.
-Original Message-
From: Justin Case [mailto:[EMAIL PROTECTED]
Sent: Thursday, April 22, 2004 6:37 PM
To: [EMAIL PROTECTED]
Subject: Re: TSM Operational reporting how?
I am not using TSM Operational Reporting tool is there cost involved or is
Thanks a lot.
Justin
"Prather, Wanda" <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 04/23/2004
11:31:07 AM
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
Sent by:"ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To:[EMAIL PROTECTED]
cc:
Subject:Re: TSM Operational reporti
>I am not using TSM Operational Reporting tool is there cost involved or is
>it now included for TSM now as a utility ?
To add a tidbit to Wanda's answer:
You'll find it listed in
http://www.ibm.com/software/tivoli/products/storage-mgr/enhancements-v5.2.html
Richard Sims
Windows doesn't understand UNIX files, UNIX doesn't understand Windows
files, so you aren't going to make this happen with dsmc.
Instead, use dsmadmc (the ADMIN command line) in your script, and use SELECT
to query the information from the BACKUPS table.
Another advantage is that you only need one
A user with MSSQL TDP 2.2 on a client with 5.2.0.3 at some point in the
past stopped running, as in 3 months ago, but the machine admin and I were
only notified today. The password is defined as generate. The TDP gui
would backup the files but not the scheduled command. If the scheduled
command
Hi All,
I heard rumors that IBM is coming up soon with new version of TSM called Light.
Less features, less money.
True or False ???
Joe Crnjanski
Infinity Network Solutions Inc.
Phone: 416-235-0931 x26
Fax: 416-235-0265
Web: www.infinitynetwork.com
-Original Message-
Fro
Fred,
If you have reset the password, you will need to store it again.
You can do this by running a command like this:
TDPSQLC QUERY TSM /TSMPASSWORD=password
This assumes you are using the DSM.OPT file in the
Data Protection for SQL installation directory.
Also.. version 2.2 is pretty old.
Ok, I have a winders 2K box with 6 SCSI-attached LTO-1's with TSM 4.2.3.1
but it has a dual xenon 1.7G set of processors, and 1G of ram with 2G of
swap space.
The LTO's are in a IBM 3483-L18. There are two LTO's on each of 3 separate
SCSI chains (they are 160 adapters, de-tuned to 80 in the adapt
We are in the process of upgrading from TSM Ver. 3.7 to Ver 5.2.
The software requirements in the BA Clients User Guide only list Win2000 and above.
Does anyone know if V5.2 will run on NT?
If not, does anyone know What the latest client Version for NT is?
Doug Thorneycroft
County Sanitation Dis
We tested it. 5.2 won't install on NT4
Latest is 5.1.7.0
Joe Crnjanski
Infinity Network Solutions Inc.
Phone: 416-235-0931 x26
Fax: 416-235-0265
Web: www.infinitynetwork.com
-Original Message-
From: Thorneycroft, Doug [mailto:[EMAIL PROTECTED]
Sent: Friday, April 23, 2004 4:45 PM
No.
In your package of 5.2 CD's, you'll find there is an extra CD for a 5.1
WinNT client.
I think any of the 5.1.x clients run on WinNT; latest is 5.1.7.
-Original Message-
From: Thorneycroft, Doug [mailto:[EMAIL PROTECTED]
Sent: Friday, April 23, 2004 4:45 PM
To: [EMAIL PROTECTED]
Subjec
Oh Yeah, another thing:
There is a readme in the 5.1.7 client install that has a table showing what
pkg to install for WinME vs. Win2K vs. NT4 etc.
-Original Message-
From: Thorneycroft, Doug [mailto:[EMAIL PROTECTED]
Sent: Friday, April 23, 2004 4:45 PM
To: [EMAIL PROTECTED]
Subject: Doe
Jack,
I have a 3583-L72 with four LTO-1 drives connected via HVDS SCSI to a
pSeries 6H1. I have two drives per SCSI chain.
Depending on the type of data, I see 15 MB/s per drive consistently, and
with highly-compressible data, peaks as high as 40 MB/s. That performance
is perfectly adequate for
This is an account of our experience
with TSM and LTO tape drives from October 2001. I posted some of
it on the list back then.
I recently was able to experiment on
systems with beefy machines, EMC disk, LTO library, and Fibre. Despi
I am fairly confident at this point that the problem is that the
password is not being properly updated in the registry, but I am at a
loss as to how to correct it. The reboot did not help. I will admit to
not completely understanding what registry it is trying to update. I
was looking at the lo
That link refers to Backup/Archive client.
I just sniffed both IE6 and ITSM-OR(5.2.2.0) Web-GUI login and both show the username
and password!
>From my PC:
POST /SignOnPost HTTP/1.1
Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/vnd.ms-excel,
application/msword,
appli
35 matches
Mail list logo
