the way I know it, 5.1 does support Win9x client side. the web site is
correct. haven't tried to mix it up with a 4.2 server, but haven't heard of
problems there yet. what exactly is the generic error you get?
have you tried doing a q actlog to see what the server says?
Cordiali saluti
Gianluca M
Since we installed 4.2.1.15 server we have seen a lot of these lately. We
have a PMR open.
Paul D. Seay, Jr.
Technical Specialist
Naptheon, INC
757-688-8180
-Original Message-
From: Adam Rowe [mailto:[EMAIL PROTECTED]]
Sent: Friday, May 31, 2002 8:09 AM
To: [EMAIL PROTECTED]
Subject: R
I have recently been trying to troubleshoot some network transfer rate problems with a
few clients, and noticed that there seems to be a wide difference between what the
client reports back (picked up in the activity log) vs. the accounting file records.
Can anyone tell my why this is, and whi
All you have to do is issue an update libvolume [lib] [volume]
status=scratch. If it is not in use TSM will change it to scratch.
Paul D. Seay, Jr.
Technical Specialist
Naptheon, INC
757-688-8180
-Original Message-
From: Joel Fuhrman [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 05,
Hi Timo,
We are also experiencing this problem. I found APAR IC32694 on Tivoli's
website, which states that TSM is turning off compression at the drive, but
doesn't really give a resolution. We are going to be opening a PMR with
Tivoli in the future.
Regards
Stuart
Infrastructure Services
Oper
An operator head-space and timing issue.
I left the leading '/' out of the DSMSERV_CONFIG environment variable.
It's been a long week today.
-Original Message-
From: Kent Monthei [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 05, 2002 4:17 PM
To: [EMAIL PROTECTED]
Subject: Re: TSM 4.
Burak,
the reason is that patches are released to fix specific problems (that's
why they are *patches*) and do not go through full testing procedure.
Whereas maintenance and rarely *some* patches get more testing and become
recommended and pointed by web site.
Think as ftp site holding all versio
Kevin,
you provoked many answers to wrong thread. So get an answer on this one as
well.
Facts about 3584:
- you can have HVD, LVD or FC drives or mix of them;
- you can have from 1 to 72 drives;
- you can use one or dual channel SCSI, integrated or on slot;
- you can connect drives one per bus, t
Hi Everybody,
Why is the following web site is always behind ftp servers? Does anybody can
answer it?
All development stuff in IBM does good job and releases maintenances and
patches but
the web stuff does not need to update the htmls immediately. I am bored to surf
inside the
ftp archive t
bring all empty cart. to online and run the following command? do i miss
something?
update vol * acc=readwrite WHERESTGpool=FILE_PTPOOL whereaccess=offsite
wherestat=full
update vol * stg=file_ptpool whereacc=offsite
[EMAIL PROTECTED]
Sent by: [EMAIL P
Luke,
you can define virtual filespaces using VIRTUALMOUNTPOINT option. They
would become separate filespaces on TSM server's DB and you can use DELete
FIlespace command later.
The other possible approach is to re-bind *all* files from than directory
*before* deletetion to a class with verdeleted
Keith, thank you for pointing this out. I have asked the folks who
maintain the web site to fix it accordingly.
Best regards,
Andy
Andy Raibeck
IBM Software Group
Tivoli Storage Manager Client Development
Internal Notes e-mail: Andrew Raibeck/Tucson/IBM@IBMUS
Internet e-mail: [EMAIL PROTECTED]
For sure it is Unicode problem :)
To have file names in more than one codepage you need Unicode support
which requires v4.2 client AND server. Other resolution could be to have
server and client with *same* codepage (regional settings). But if you
match server code page to that node's codepage
We sometime get this with a broke tape or a tape that is write locked. We
usually check them out and look at them. If they look good we log their
number and check them back in. We log the number to see if it happens to
them again. If so we get rid of them.
Just my 2 cents worth.
--
Phillip
octet 255 is broadcast only if network is class C, i.e. 192.0.0.0 -
223.255.255.255. Other case is when subnet mask is 24 bits - 255.255.255.0
But if he has subnet 10.0.10.0/22 for example (adresses 10.0.10.0 -
10.0.13.255) this is ordinary host address and this IS a bug.
Zlatko Krastev
IT Consul
As I said earlier (see below), the ONLY Win9X client that is supported by
5.1 is Windows Me.
The web site is in error and will be fixed accordingly.
To summarize:
Version 4.1: Supports Windows 95, 98, and Me. Goes out of service for most
platforms at the end of June; goes out of service for OS/
Hi eric,
This is not the all volumes in file_ptpool storage pool. There has a scratch
tapes availabe in the storage pool.
The followings is the all volume list.
FP0001FILE_PTPOOL 3590CLASS20.00.0 Empty
FP0002FILE_PTPOOL 3590CLASS2 13,711
Hi all,
One of my servers is giving me a major headache at the moment. Every morning
when I come in, I check, as anyone does, I presume, whether all scheduled
backups completed succesfully. The past couple of days, one of my servers
doesn't complete, nor does it fail. Or so it tells me, because t
I'm planning on taking over classes at a local community college teaching
classes about Unix operating system design, teaching the super block
design, inode assignment design, system calls, file descriptor table
designs etc. I want to try to put together a TSM internals design
curriculum as well a
We are planning to upgrade from the ADSM 3.1 server to TSM 4.2 this weekend
on OS/390. I have been trying to find out what the latest PTF level is for
this product, but so far without success. Does anyone have any information
about that or any information about any problems found in the 4.2 ser
Hi at all ...
I have a technical question and I try to explain in good form.
If I have a 2 servers with TSM, for example TSM1 and TSM2. The server TSM1
make a backups a one group of server "GROUP1" and TSM2 make a backups a
other group "GROUP2". My cuestion is: In case of fail the TSM1 is posible
How many drives do you have in the library? Can you provide additional
info - output from Q LIBR, from Q DRI F=D and from Q DEV 3590CLASS2.
You do not have reclamation pool and if the number of drives is not enough
reclamation would not start.
Was it ever working?
Zlatko Krastev
IT Consultant
Luke, it can be done but it is a multi step process involving both
the server and the client. Do this before the data is deleted from the client.
1. In the server make a new mgmtclass called DELETE_NOW.
Set the backup copygroup numbers to their lowest allowed values -
1,0,0,0 (vere, rete, verd,
Look at the output of Q DB F=D. Is you cache hit ratio below 95%? What is
the type/speed of disks you use for DB volumes, Q DBV may sched some
light.
Check also the connection to those nodes - 10/100, Full/Half duplex
settings. Avoid auto-detect settings on both Ethernet adapters and switch.
Zlat
your files are "password protected" says the usual ftp sites.
I just wanted to mention this kind of things in the e-mail i sent today with
subject "tsm ftp server"
my previous e-mail:
Hi Everybody,
Why is the following web site is always behind ftp servers? Does anybody can
answer it?
Al
Hi everybody; I'm running TSM server on Win2K and TSM storage agent on AIX
4.3.3, both updated to release 4.2.1.11.
The storage agent starts in quiet mode at boot time, but once a week I have
to save production data onto a pool for a caveau site.
The problem is that I use a management class call
My question is: What is daily registry backup and when is used?
If you want to know the environment: TSM Client 4.2.1.12 on Windows NT.
TIA
---
to: "Rushforth, Tim" <[EMAIL PROTECTED]>
cc:
date: 6/5/2002 4:47:29 PM
subject: Re: Daily registry backup
> In what context?
>
> Please explain m
Dear colleagues,
could anyone give a suggestion how to checkin the cleaning cart in the
a.m. lib? When I try to checkin libv lb0.0.0.1 cln001 checklabel=no I
always get the same message: library is full. There is one empty slot from
TSM point of view and it is physically occupied by CLN00
So you probably don't want to install _all_ the patches. But if you want to
know when a new patch comes out so you can look it over there are many
products that can monitor a web site for changes. I'm sure that at least
some of them could watch a tree on an ftp site that allows anonymous access.
(Sorry for the length of this, but this is complicated. Don't read it
unless you are getting ANRD on reclaims):
ANR is a generic bucket message for anything that doesn't have its own
error message number. so you can get ANRD for lots of reasons.
The original post had this informatio
Assuming this is the pool you're trying to reclaim, at first glance I notice
it doesn't even have a reclamation pool defined. Of course it can't reclaim
any tapes without a reclamation pool. Note the "Reclaim Storage Pool:"
section which is blank. Changing the reclamation threshold will do nothing
Hi *smer,
i have a big problem with the password expiration of the clients
(4.2.1.20)!!!
In the network are up to 80 clients like NT, W2K, Aix, Linux and Oracle TDP.
The Client Opt Set has the entry passwordaccessgenerate yes
The TSM Server status has the Password expiration Period set on 90 D
Assuming there is nothing obviously different that might be causing this
such as the 2nd client listed below already having a heavy load on it, or
backing up over an extremely slow connection (modem? Even that probably
wouldn't take 5 hours though!) - you're going to have to do a trace to solve
th
Hi *,
Relative newbie, pls be patient...
I have successfully created a TSM PD/PS/MC/POOLS and backed up a 265GB
filesystem to TAPE. The TAPE pool definition is:
VDE: Nolimit
VDD: Nolimit
REV: Nolimit
ROV: Nolimit
Overflow Location: offsite
My question(s):
What is the best method to 1) check
If these are the ONLY tapes in this pool check the access for FP0001.
You may need to run something like the next command to bring the empty tapes
back in to use.
upd vol * acc=readw wherestg=file_ptpool wherest=empty
-Original Message-
From: Max Kwong [mailto:[EMAIL PROTECTED]]
Sent: Wed
Hi all,
I hope someone out there could help me with this problem that is really URGENT!.
I have a Domino 5.0.10 on AIX 4.3.3 with TDP for Domino 1.1.2
TSM server 4.2.1.7 on AIX.
The problem is, when I execute selective backups, all is working fine but, when I try
with incremental backups, the tdp
According the Tivoli the Problem ist fixed at server level 4.2.1.13.
I will give level 4.2.1.15 a try. Will inform the list about the result!
Timo Kilchenmann, Bechtle Data AG Regensdorf, Tel: (+41) 1 843 34 91
--
Ext
Processing time seems a bit exorbitent, no?
-Original Message-
From: Rob Jones [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 05, 2002 12:38 PM
To: [EMAIL PROTECTED]
Subject: Re: data tansfer time ???
Well, it took 1 hour 45 minutes to scan 12,987 files on that node. Only 29
changed
You sure the process is cpu bound and that it even matters? One would think
the operation is more I/O bound..
Otherwise from redbook "using the ba client" try adjusting the
resourceutilization paramater:
Resourceutilization
Authorized User
The resourceutilization option regulates the level of re
HI,
When i use DSMC with client compression on, my AIX use only one Processor for
compress Data.
I have 6 processor, how can config my DSMC to use the 6 processor for compress my
data faster..
is it possible ?
Thanks,
I apologize for my question being so generic. Let me try to nail it down
better for everyone...
I'm not interested in what others have done on W2k, AIX or RS/6000. I'm not
interested in what other have done with SAN or Fiber. Most of what I saw in
the archives dealt with these components.
My
Well you haven't explained much. "Daily registry backup" doesn't really
mean anything in TSM terms. It could be a schedule that is setup to do a
"daily registry backup" (dsmc backup registry).
Where do you see "daily registry backup"?
On NT and w2k with most recent clients, the registry is bac
Bob, the latest ptfs are UQ65584 - 87. This is level 4.2.2.0.
You should be able to get these from IBMLink, SUF, or the tsm FTP site.
You should also get the 4.2.2.1 patch from the FTP site.
At 08:37 AM 6/6/2002, you wrote:
>We are planning to upgrade from the ADSM 3.1 server to TSM 4.2 this
Luke,
Other's have suggested ways to delete a portion of a filespace. Please allow
me to also point out that setting a very high VerExists and VerDeleted
wastes lots of processing time. For every file TSM has to go to its database
and count how many versions there are. If you really want unlimite
look a resourceutilization
you can't spread the compression task out for a single session but you can
initiate multiple sessions.
Each task will bind to a different processor (should... famous last words)
Is this just an "incr" task ? ? ? or are you running an archive(s) ?
Dwight
-Original
You only need a reclaim pool if you have just one drive or the number of
mounts for the device class is set to one. If you have multiple drives and
define the device class to use drive or more than one then you do not need
to define a reclaim pool.
--
Phillip Ford
Senior Software Specialist
Cor
The "Reclaim Storage Pool:" is an OPTIONAL parameter and if not specified
the reclaimed data is written back to volumes in the same storage pool. This
parameter is described:
RECLAIMSTGpool
Specifies another primary storage pool as a target for reclaimed data
from this storage pool. Th
Hello all,
If I am reading things correctly, all my v4.1 clients are NOT
compatible with V5.1 server. Nor is a V5.1 client (where supported)
compatible with a V4.1.5 server. Is this supposed to be a multi-step
upgrade? Am I therefore supposed to tell management that the presence of
W
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On
Behalf Of Anton Gubarkov
> could anyone give a suggestion how to checkin the cleaning cart in the
> a.m. lib? When I try to checkin libv lb0.0.0.1 cln001 checklabel=no I
> always get the same message: library is full. There is one empty
>
Hi, TSMers,
If you do not specify or leave blank when registering a node, what will
be the default exp. period? Should I always enter some value for this
field using Web admin interface? I know that 0 means never expire the
password. Should I set all the node with this value?
Thanks for your hel
Check the README files, to confirm your planned migration matches your
expectations... in general, old clients are supported (ie, continue to work
just fine!), within the following constraints:
- old client on new server, only old features can be used;
- new client on old server, usually okay prov
Greetings oh wise and experienced TSM gurus, experts, workers, and
knowlegable newbies!
I am about to build a new TSM server from the ground up. It's been a long
time since I last configured storage pools, etc, and I am wondering what the
current state of the art in configuration philosophy recom
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
Fletcher, Kevin
> My question is specific to NT 4.0 and SCSI direct connect. I've been told
> that I can only have "two SCSI interfaces per TSM NT server". I
> was looking
> for some feedback on this.
Not true.
End of feedback
How about this,
1. Primary copies.
Set up another storage pool so that your migration hierarchy is
diskp->tapep1->tapep2
Every day backup to diskp then migrate to tapep1.
Limit tapep1's number of volumes to an appropriate percentage of your library. Set a
migdelay on this pool of at least one
Justin,
Take a look at www.share.org. There were 55 sessions in the Distributed
Computing Storage area of over half being TSM. This was at Nashville.
There will be that many more at San Francisco. Come join us August 18-23.
Paul D. Seay, Jr.
Technical Specialist
Naptheon, INC
757-688-8180
--
Understand Rafael that incremental backups will only backup Domino files
if the DB ID has changed or if the file is new. DB IDs are changed if you
run a COMPACT -B or a FIXUP -j on the Domino file. If new documents are
added to the database this doesn't mean an incremental backup will
work...you
56 matches
Mail list logo
