minutes is the maximum setting for mountretention. 0 probably means
'never remove tape', although perhaps someone could confirm this..
-Original Message-
From: Paul CC Lo [mailto:[EMAIL PROTECTED]]
Sent: 09 August 2001 09:33
To: [EMAIL PROTECTED]
Subject: TSM Tape Retention Time Li
Is there a limitation for TSM device class to set the mout retention to
minutes? Do we have any option to set the mount retention to be
longer or to disable this function to remain the tape in the tape drive?
Best Regards
Paul Lo
Mike,
we had similar problems, the new client could would just die in the backup
wihout a worthy message left behind, an excerpt from the V4.1.2.19 fix:
* IC29845 Client terminates the backup if it tries to back up a drive it *
* can not access (such as the Microsoft Exchange Ins
Hy all,
I'm trying to archive some data from an HP-UX 10.0 box with ADSM 3.1 client
to an AIX 4.3.3 Server with TSM 4.1.4.
I'm using the graphic-interface (no web-interface available).
The amount of date is about 6 Files and 2 GB.
At the beginning the archiving works ok, but after some time i
>I'm going through my first experience with a broken tape and I'd like to
>know how to clean this up. Since the tape is broken it obviously can't be
>mounted to extract data. ...
Geoff - The question is, "How broken?" With a 3590, it's usually the
tape being snapped within a few inches o
Many years back I posted a note along the lines of "a poor mans guide to
fixing a snapped 3590"
I believe #2 pencil & pair of round nose safety scissors was all that was
required.
I'm sure it is out at www.adsm.org still ;-)
Dwight
-Original Message-
From: Richard Sims [mailto:[EMAIL PROT
Find attached the steps that I use to fix broken/damaged tapes.
--
Phillip Ford
Senior Software Specialist
Corporate Computer Center
Schering-Plough Corp.
(901) 320-4462
(901) 320-4856 FAX
[EMAIL PROTECTED]
-Original Message-
From: Cook, Dwight E [mailto:[EMAIL PROTECTED]]
Sent: Thurs
How do I back up locked files under Windows NT? Specifically the
c:\winnt\system32\config directory, which contains the SAM database and
other important NT system files.
I have set the management class to DYNAMIC, but this still does not back
them up. The error says the file is being used by anot
I went out an pulled my note from the archives to provide a FYI...
DWight
Did it really eat the tape or just say pop of a foot or two from the
front ?
You wouldn't believe the amount of confetti that 1 ft. of 3590 can
make inside a drive !
Now, naturally IBM has a bunch of
Perusing the 4.2 client manual to learn of new functionality (worth doing from
time to time) I was amused to find the new client option "V2archive", which
makes Archive perform the same way it did in ADSM version 2, which is to say
that it will only archive files, and not directories. And you tho
>How do I back up locked files under Windows NT? Specifically the
>c:\winnt\system32\config directory, which contains the SAM database and
>other important NT system files.
You don't...directly, that is. As the B/A client manual says,
"These are system files that cannot be recovered without poss
Hello fellow *SM'ers! I've discovered that in the past two small log volumes
were defined to the same DASD volumes as DB volumes. Since this is not
recommended due to performance considerations I'm trying to get rid of these
log volumes however I've been unable to do so.
I'm running TSM 4.1.0.0 o
do a "q logvol" to see the size of the two little logs you want to remove
then do a "reduce log " where is the size (in MB) of the log files
you want to remove
then do a "del logvol blah"
so, roughly speaking, to delete a log (or dbvol) you have to have that
amount of space listed under t
>ANR2445E DELETE LOGVOLUME: Insufficient space on other recovery log volumes
>to delete volume ADSM.RCVLOG4.
Alan - Do a REDuce LOG first.
Thanks for your reply, Herfried. It brings to mind some other questions
regarding other volume groups. Say you have all your Oracle stuff on one
or two different vgs. Would you need to have done a savevg sometime in
the past to get the vg back, or at bare metal time would you need to
manually c
Also, Geoff, remember that the tapes are guaranteed for 10 years-- you
could always put in a call to Tucson and have them extract the data to
another tape for you if rebuilding from copy pools is too onerous.
lisa
Richard Sims <[EMAIL PROTECTED]>
08/09/2001 06:35 AM
Please respond to "ADSM: D
Hi TSM world!
Anybody know, have I to backup C:\WINNT folder if I backup SYSTEMOBJECT (that include
and all system files in C:\WINNT folder and subfolders and it takes about 200MB)
Can be SYSTEMFILES incremental? becouse it always does full backup :-(((
Maxim Batourine
Faculty of Architectu
Hi,
I have a copy stgpool that I could not find the corresponding
primary pool. (this copy pool was created long time ago by the former ADSM
admin). IS there a way to find its primary pool?
Thanks.
Jie
-=>From: [EMAIL PROTECTED]
-=>To: [EMAIL PROTECTED]
-=>Date: Thu, 9 Aug 2001 09:29:27 -0400
-=>Subject: Re: Deleting log volumes
-=>
-=>>ANR2445E DELETE LOGVOLUME: Insufficient space on other recovery
-=>log volumes
-=>>to delete volume ADSM.RCVLOG4.
-=>
-=>Alan - Do a REDuce LOG first.
-=>
Of cou
I have successfully recovered a win2k server using client 4.2 we are
currently in the process of testing the recovery of an AD server.
I followed the procedure that was listed in the redbook for w2k recovery.
T
-Original Message-
From: Joe Spade [mailto:[EMAIL PROTECTED]]
Sent: We
Thank you Dwight. I feel silly for not thinking of that. I've been
over-analyzing trying to figure out why an almost empty log file had no
space available. This gives new meaning to "Can't see the forest for the
trees"! (:
Al
-=>
-=>From: [EMAIL PROTECTED]
-=>To: [EMAIL PROTECTED]
-=>Date: Thu,
>Geoff - The question is, "How broken?" With a 3590, it's usually the
>tape being snapped within a few inches of the leader block.
Richard,
As I've been taking a look at the whole situation I find it is very
confusing. The tape case has a small corner, right at where the blue plastic
le
1)
Oracle Setup example: SW in the rootvg / All datafiles in one oraclevg
with AIX fs mirroring ( HW: mirror between two different SSA drawers ) /
archivelogs in a seperate vg with mirroring (same as datafiles). The good
old initORCL.ora within the rootvg. DB-Controlfiles mirrored by Oracle in
ro
I will be out of the office starting 10/08/2001 and will not return until
20/08/2001.
I will respond to your message when I return. Please forward any problems
to Ben Bos on #441
>As I've been taking a look at the whole situation I find it is very
>confusing. The tape case has a small corner, right at where the blue plastic
>leader attached to the end of the tape, pulled out so it will not pop back
>in and stay there. I have tried to bend the plastic back but it is very
>l
Do we have any definite dates on this release?
http://www.phoenixitgroup.com
**Internet Email Confidentiality Footer***
Phoenix IT Group Limited is registered in England and Wales under company
number 3476115. Registered Office: Technology House, Hunsbury Hill A
0 means remove the tape as soon as TSM is done with it.
Jim Sporer
At 09:43 AM 8/9/2001 +0100, you wrote:
> minutes is the maximum setting for mountretention. 0 probably means
>'never remove tape', although perhaps someone could confirm this..
>
>
>
>-Original Message-
>From: Paul CC
>Subject: AIX 4.3.3 list of excludable files & filesystems
>Has anyone ever compiled a list of files and/or file systems that can be
>excluded from backup either because they are dynamically created by the OS
>at reboot/syncvg etc, or because they are included in a mksysb?
I would not want to
Geoff,
I would just do a RESTORE VOL XXX PREVIEW=YES
and check actlog (per earlier post) and see how many tapes
are involved. It may be simpler to restore than anything and
I have found it to be about 100% reliable. It's never
taken me more than about an hour to do - even when I had 20
tapes nee
I don't think TSM has to do.Drives h/w does that.
I worked on 35XX Lib .We used to do it manually.
-Original Message-
From: Stan Vernaillen [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 09, 2001 9:50 AM
To: [EMAIL PROTECTED]
Subject: Cleaning frequency ?
All,
I got a single 3590 l
All,
I got a single 3590 library with a cleaning cartridge in there. the drive
has cleaning frequency "ASNEEDED".
now the display says that the drive needs cleaning, but TSM does nothing...
Was I wrong to think "asneeded" ment that the library would take the
cleaning cartridge a
WHere is the "login as" defined? As a parameter in the setup of the
service? If so what is the syntax?
Thanks
-Original Message-
From: Del Hoobler [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 06, 2001 9:33 AM
To: [EMAIL PROTECTED]
Subject: Re: TDP SQL v2.2
>Getting the following m
>I have a copy stgpool that I could not find the corresponding
>primary pool. ...
Jie - Quite an interesting problem. I've been trying to think of a
definitive answer, but the best I've thought of so far is to
do a Query OCCupancy and look for entries which reflect being in
both a
If you're already setup you can got to "Services" and select
the service you want and then select "Startup" (I beliveve
that is it) and then it gives you a popup that allows you to select
what account the service runs as. Generally you run as
the "System" account, but I have one system that has t
I think the *SM manual stattes that *SM cleaning is only done'
for SCSI libraries that don't have Auto cleaning. It lists several
specific libraries that *SM cleaning is not valid for.
Use Autoclean on the Library for the ones that support it
and set CLEASNFreq to NONE for these.
I have 3575 li
I set that to the account that is logged in on the server. If I manually
run sqlfull.cmd it runs fine but if I let the scheduler service start the
backup it fails.I have tried the domain administrator account & a local
admin account that are supposed to have sa equivelant access & no luck...
I have two storage pools: a small disk cache (just enough to hold almost
two tapes worth), and a tape pool with a single drive.
I have set the disk cache highmig so that it will begin migration
when the diskcache has more than one tape's worth of data, so that
migration will write an entir
> I set that to the account that is logged in on the server. If I manually
> run sqlfull.cmd it runs fine but if I let the scheduler service start the
> backup it fails.I have tried the domain administrator account & a
local
> admin account that are supposed to have sa equivelant access & no
>... I'd like migration to end when it reaches the end of
>a tape. Is there some way to do this?
Someone else's brain may come up with something better than this:
If using scratches, you could maintain a storage pool MAXSCRatch value that is 1
more than the number of tapes that the storage pool
I've just been informed by lvl2 that the UNLOADDB command of TSM 4.1.3
can not handle a DB that goes to more than one tape.
How can they ship a 3466 with TSM at a level with KNOWN PROBLEMS!
I'm using 3590s with a 30 Gig DB and it stalls at the same
place every time.
Recommended fix is to go
All,
I need to know if anyone has a solution for Exchange that can backup
and restore a 70 Gig Exchange database in 1 hour. The solution would need
to scale to 40 Exchange databases. I have lots of ideas and new technology
to use, and I have tested SAN backup, but I do not prefer this s
We have a new installation of Windows 2000 TSM 4.1.4 connected via Brocade
fiber channel to a HSC STK Libstation driven Powderhorn with 9840 tape
drives. I have been told my libraries and drives are configured to work, I
just need to know what entries need to be made in the server options file.
A
Hi *SMs,
There are some management class in a domain. How can I specify a management
class that it will be used by backup command in the schedule of TSM?
Thanks,
Manoel.
I just got off the phone with TSM level 2 support. This is a known problem
with the Windows 2000 4.2.0 client. It is a timing issue. The client
can't get the password from the server and tries 3 times. A second
later it gets it. The developers have no fixes for this, no APAR
either. They may
Whatever mgmt class you want to use should be made the
default mgmt class and then activate the policy set.
Thanks,
Angela
--- Manoel Braz <[EMAIL PROTECTED]> wrote:
> Hi *SMs,
>
> There are some management class in a domain. How can
> I specify a management
>
> class that it will be used by backu
I don't know the technical details surrounding this problem or why it
(supposedly) can't be fixed (I don't like the word "can't"), but I can
assure you that there *will* be an APAR. If/when it will be fixed is
another matter, but it needs to be formally documented.
Regards,
Andy
Andy Raibeck
IB
Hi...
I have a HP-UX running TSM 4.1.0. There are two libraries HP DLT 7000 with
four drives each one. Currently, I use the four drives of one library in a
backup process. I need to use the two libraries, the 8 drives in a same
backup process, with just a backup/archive client, not using TDP. The
On your include/exclude file put the management class you want to
associate your files:
include /your_path/* management_class
Regards.
--- Manoel Braz <[EMAIL PROTECTED]> escribis: > Fecha:
Thu, 9 Aug 2001 16:47:37 -0300
> Responder a: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
> De: Mano
Hello,
Assume 1 object = 1 file
Lets assume I have a node with one partition. The partition called
/stuff
has 1,000,000 files.
I start expiration and it is working on the file system /stuff
from the beginning. I cancel the process after it gets to file# 500,000
When I start expiration again I
Lisa,
I run a dataless savevg weekly on all my non-root VGs to save in a file on the rootvg.
To recreate the VG you just run a restorevg and presto its defined as it was ready to
restore the data from TSM
Here's my script. Warn and abort are a couple of ksh functions.
#!/usr/bin/ksh
#
# Thi
I am trying to restore a TSM Server to another server.
After I give the
restore db devclass=4mmclass1 vol=s1db3 commit=yes command, it formats the log and
also tries to load the tape but gives me this error. Please advise on what to look for
and correct this problem.
ANR83261 001: Mount 4MM v
Hello Tsmers,
I have one DLT 7000 Autoloader connected in the
Adapter SCSI (aic78xx) of my netfinity 7000 running
NT 4.0 SP5.
I have, too, installed TSM Server 4.1 with TSM Device
Driver.
When I utilize the "Device Configuration" of the
"Server Utilities" interface I can define only the
Drive
I've gotten some reporting to work with ADSM/TSM but there are some thigns I
would like to do that I have yet to accomplish...and I cant imagine that
they are anything new. I have gotten select statements to work and then
eMail results, etc...I can get ODBC connections to work to the TSM server
v
I had the same problem with TSM 3.7.0 and AIX 4.3.3. In our environment we
observed that after 900 GB of data processing by the tape drive itused to
flash CLEAN message but TSM never cleaned automatically. So I have set the
cleaning frequency parameter as 900 instead of ASNEEDED and now TSM is
re
I will be out of the office starting 08/10/2001 and will not return until
08/21/2001.
I will respond to your message when I return.
We just ordered them. Fuji confirmed proper functionality with the LTO
Ultrium drives in our 3584 and guaranteed onsite support if necessary. I can
share my experience in a couple of weeks.
Joerg Nouvertne
http://home.wtal.de/the_swordsman
> -Original Message-
> From: ADSM: Dist Stor Ma
56 matches
Mail list logo
