James,
On our system the library is libobk.so
Here is the output from the find / -name libobk.a -exec ls -l {} \; command
lrwxrwxrwx 1 root other 43 Feb 1 09:28 /usr/lib/libobk.so ->
/opt/tivoli/tsm/client/oracle/bin/libobk.so
-rwxr-xr-x 1 root other 135260 Apr 18 200
Over the past month (maybe longer, my memory is whacked) or so, we have had an
increasing frequency of the NT server's passwords going out of sync, with no
apparent reason.
I find this in the dsmerror.log
02/09/2001 09:25:26AM ReadPswdFromRegistry(): RegOpenPathEx(): Win32 RC=2 .
02/09/2001 09:2
Great idea, Miles. Some of my installations use older technology, e.g DLT
or 8mm Mammoth for offsite DR and use LTO for on-site normal backup. This
way the investment in old technology is redeployed. With DLT and 8mm you
don't have the slow-as-molasses reclamation processing if these
technologies
Hello..
I currently have 1 IBM 3466 B03, 1 IBM 3466 C30, and TSM on 390.
The B03 is being replaced by a C01. B03 is a microchannel RS/6000 running ADSM
3.1.2.50
The C01 will be a PCI H70 RS/6000 running TSM 3.7.2.0. I will be responsible
for migrating all the
data from the B03 to the C01. Both
I am getting the following errors in the /dsmerror.log file constantly. If
any one has an idea why this seems to be happening, I am all ears.
ANS1102E Excessive number of command line arguments passed t
o the program!
ANS1133W An expression might contain a wildcard not enclosed
in quotes
They s
The only way I find around this was to recreate the old Domain on the new
server, with a stgpool if necessary, and then update the node to the new
domain after the import. If a stgpool is necessary, I make it so small
that it migrates to the desired stgpool immediately.
On Thu, 8 Feb 2001, She
Hi,
I assumed that the domain= on import referred to domains on the export
volume that you want to import, not that I see much use for this. Whenever I have
imported to a different domain I had the new domain already defined with the
node registered and then imported the data from the export volu
Hi Bill
Thanks for the response it is very helpful, my next question is that when I
use the VOLRANGE parameter must it always be the entire range of tapes. And
when this is done does this completely discount the other tapes from being
included in the others checkin procedure.
In response to the
Hi Steve!
Reliable contacts at IBM seriously doubt whether the Accelis will ever be
produced... There seems to be little market for high access "low" capacity
tapes.
Kindest regards,
Eric van Loon
-Original Message-
From: Steve Harris [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 09,
We have been using ADSM and TSM to back up a number of OpenMail servers
running under HP-UX. OpenMail stores messages in a database implemented as a
large collection of small Unix files. A sound backup requires a
self-consistent snapshot of the entire collection of files. We have been able
to stop
Hi Paul!
I don't know anything about AIT. We are currently using 3570 because of it's
fast data access times, but we need a larger library. Since we are already
using the largest one (3575-L32) our only option was to use more libraries.
Not something you would like to do in a TSM configuration.
We
> Sorry for not responding earlier. Been rather busy.
> Just to clear a few things up. This machine does not
> have the TSM server code on it. It just has the 4.1.2
> client code. The machine has 4 CPU's. Before starting
> an incremental backup the CPUs are more that 50% idle.
> When a TSM in
On Wednesday 07 February 2001 18:41, you wrote:
Del,
> Jörg,
>
> It looks like you may have a legitimate problem here.
> Please open a problem with IBM/Tivoli support.
>
I will open a call today, thanks.
> Thanks,
>
> Del
>
>
>
> Del Hoobl
> Michael - You seem to not have the appropriate libraries as
> specified in the Tivoli requirements page
> http://www.tivoli.com/support/storage_mgr/adcllin.htm .
> Check your Linux system via the 'rpm' command to see if it
> has the pre-reqs that TSM calls for.
Required by tivoli:
Lin
Hi,
I issued "checkin libv 8mm-library search=yes checkl=barcode
status=scratch" to checkin a scratch tape for database backup. Right after
that, I remembered that I should check the volhist. So I issued "q volh
t=dbb" and find out that the volume I was trying to check in dad been used
for
The things to watch for in a server-2-server configuration involving diskpools
is too make sure the receiving diskpool can buffer the archive (!
server-2-server data uses a defined archive copy group !) sent over by the
source server, the parameter to watch is the 'max cap' for the device class
de
Hi,
sorry if this is a silly suggestion, but check your maxscratch on the copy
pool definition.
Paul.
> Hello All
>
> I have a problem with sending copies of primary stg pool using server to
> server. I have a source server defined on a target server that I am able
to
> send nightly DB backup
Hi there,
I would like to know how to install TSM Client Acceptor under 4.12? I
noticed that if old tivoli box has tsm client acceptor service exists then
there is no problem with tsm 4.12upgrade. However if this is a brand new
computer, when I installed tsm 4.12 client , tsm client acceptor
Hi to all, any body know how can i delete a backupset ?. This is expired,
but it still in the volumen history (i think that is in the Volhistory DB
Table, because im delete the register from the volumen history file).
We have a TSM Server 4.1.1 on Win NT 4.0.
thanks in advance
--
Hi Bill
Thanks for the advice, it is working perfectly.
Regards
Alex
William Boyer
<[EMAIL PROTECTED]To: [EMAIL PROTECTED]
ET> cc:
Sent by: Subject: Re: TSM and 349
Yeah, don't run awk, but rather nawk. I think the syntax for running that
is in the script file provided with DRM.
Kelly J. Lipp
Storage Solutions Specialists, Inc.
PO Box 51313
Colorado Springs CO 80949-1313
(719) 531-5926
Fax: (240) 539-7175
Email: [EMAIL PROTECTED] or [EMAIL PROTECTED]
www.st
Since it's all AIX, you will be able to restore the old TSM database on the
new TSM server and voila. Note that your drive and library definitions in
the restored server will definitely be wrong. Fix those up either with an
update drive, update library, or delete and start over with the
definini
I called the same problem into TSM support. There isn't a way to delete
these backupsets. There is an APAR out for this problem and they say it
should be fixed in TSM 4.1.3 which is supposed to be released the end of
this month.
Linda Seeba Phone: (314) 234-5190
I/T
Here is a real general question . . . . .
How do you handle tsm upgrade testing?
When a new release comes out do you:
a) dump it on you server, upgrade and see if it works?
b) create a test instance and try it out first?
Related questions:
1) I know you can have multiple tsm instances runn
Joe,
On SUN platforms you have to use nawk, not awk to process the DRM plan
file. They are different versions and nawk is compatible with the industry
standard awk.
Scott C.
At 10:08 AM 2/5/01 -0500, you wrote:
>Group
>
>We recently had a disaster recovery drill for our Unix Sun Box E10K, We
>dsmc: error while loading shared libraries: libstdc++-libc6.1-1.so.2:
>cannot open shared object file: No such file or directory
Michael - Two final things I would check:
1. That the library which the rpm listing says is installed, is actually
in the usual place:
/usr/lib/libstdc++-l
Do you mean other than using the DELete BACKUPSET command on the TSM
server
Thanks,
Demetrius Malbrough
TSM Consultant
-Original Message-
From: Claudio Cofre Caro [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 09, 2001 10:30 AM
To: [EMAIL PROTECTED]
Subject: I cant delete a backup
-Alan-
This might be why you are getting these errors in the dsmerror.log: Within
one dsmc session, 3 consequentive query backups are issued with quotes
surrounding the filespeciation with a wildcard and the 2nd query command
uses the options -todate and -fromdate.
For example:
# dsmc -se=ewat
I have the same problem, AIX v4.1.2.0. I used the 'delete
backupset' command and it completed successfully, but the
entry still clogging up the volume history file. I'd like to
get rid of it without taking down the server, editing the
file and starting the server up again. The backupset expired
ov
You haven't said if you are running the db2adutl commmand to
expire old backup versions. Db2 backups are saved with a timestamp
so each db2 backup is an 'active version' The only way they become
inactive and eligible for expiration is if you run the db2adutl command
that deletes the backups.
Ja
DB2 backups as with most database backups are not deleted by directly by *SM. us
the DB2 utility db2adutl to delete the backups and log archives.
Gerhard Wolkerstorfer wrote:
> Hi *SMer,
> one of our customers is making a backup of his DB2/2 V6.1 database once a day
> and his files (One Backup
I always just use the entire range. It's only asking for tapes with the
insertion catagory within the VOLRANGE. Doesn't hurt to specify the entire
range. That way I just have 1 command I use.
Bill
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
Tec
There is a known APAR for this; it's fixed in 3.7.4 (for 3.7),,, don't know
when it's fixed for 4.1.
Hope this helps.
Don France
Technical Architect - Unix Engineering/P.A.C.E.
San Jose, CA
mailto:[EMAIL PROTECTED]
PACE - http://www.pacepros.com
Bus-Ph: (408) 257-3037
-Original Mess
(a) absolutely not - UNLESS you don't care about the results; this is why a
certification or development (or LAB?) environment is necessary (and not
just for TSM - all apps.)
(b) absolutely yes - any deviation from this practice is like flying trapeze
without a net
1) yes, if you know what you'r
Donald,
With Oracle 8.1.x all you need to do to use a third party media management
library
is to set that link. You have the link set correctly, so Oracle should be
using
the TDP for Oracle library file. You didn't by chance run the make command?
You might want to give Oracle support a call and
35 matches
Mail list logo
