Hi cracks
does somebody know, how to configure and start the webclient with a
batch-file?
Tx for your solutions.
Claude
> Claude Disler
> Abraxas Informatik AG
> Waltersbachstrasse 5
> CH-8035 Zurich
> Schweiz / Switzerland
>
> E-Mail: mailto:[EMAIL PROTECTED]
> Internet: http://www.abraxas.ch
Dear sir,
Is ADSM 3.1 support Windows 2000? If I wanna to backup its system,
how do I?
Regards,
Jumpol Tunprayoon
Shell Service International
what i'd do : select the volume names, then for each one call dsmcadm move
data command on it
step 1 :
dsmadmc -id=adminname -pass=adminpass -outfile "select 'EYECATCHER',
volume_name from volumes where-condition..."
will output something like :
eyecatcher VOLUME_NAME
-- --
Hello
Our backup-server will be upgraded to TSM 4.1.x (eg.2 i think) next
week.
I don't think all clients will be upgraded to the same level by then.
Some of them have 3.1.x-clients - especially some NT4.0 clients.
Are there any major conciderations/problems that I should be aware of in
that si
Hi,
The following command
select * from events where -
events.status not in ('Completed','Future') and -
events.scheduled_start between -
'01/19/2001 07:00:00.00' and '01/24/2001 07:00:00.00'
produced the following output:
full output (all columns) see attached file resultaat10
ADSTA
Our ADSM storage pools have been configured with MAXSIZE=50m so
that huge files don't overflow our limited tape capacity.
This is working as expected. The client gives some error messages:
ANS1228E Sending of object '/u/raid/ashildur/Rufe/2x2/N/wfn-0.5fm2.gz' failed
ANS1310E Object too lar
> Is ADSM 3.1 support Windows 2000? If I wanna to backup its system,
> how do I?
The only clients with Windows 2000 support are 3.7 and 4.1. So if you have
a supported ADSM 3.1 server, use the 3.7 or 4.1 client. If you don't have a
supported 3.1 server, then you need to upgrade your serv
Does anyone know what this message means??
ANR4706W Unable to open file CommandLineBeanInfo.class to
satisfy web session 31.
Thanks
Patty
Liberty Mutual
Digest
Hello,
since almost 2 months I have an open problem (#37565): Some of our Mac
clients (MacOS 9) have upgraded to TSM 3.7 and later to TSM 4.1 and are
unable to restore (under both versions). Some few files are restored,
but then the session dies, showing
DTcpipInterface::ciReadAvailable: UnKnown
>From the client readme:
"The system objects (first supported with the V3.7.2 client) require a
V3.7.3 or higher TSM server."
Tim Rushforth
City of Winnipeg
-Original Message-
From: Wayne T. Smith [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 25, 2001 6:59 AM
To: [EMAIL PROTECTED]
I just need confirmation on this.
I ran a number of sel backups on a 90Gb array. When I performed the first few
restores the tape mounts occurred instantly. Over time the tape mount times
have started to increase. Currently it takes about an hr for the tape to mount
when I issue a restore req.
I
Hi all.
We recently included four new Magstar drives to an existent 3590 library
that is being used in our mainframe environment, to allow us use it also
with our TSM.
We connected and configured it and it seems to be ready for use, but I
cannot manage to check in any tape.
When I try to label
The short answer appears to be "not very well".
We've had a myriad of problems with our Mac clients. First
the scheduler and now the inability to restore folders.
Granted, we are running ADSM v3.1.2.5x on VM, but support
assured me that v3.7 and even v4.1 clients would work
(new features, of cour
Hi to all, anybody know a solution for this error ?
Server:ADSM 3.1.2.90 on a WinNT 4.0 SP-4
Client:TSM Client 3.7
TDP for MS Exchange 1.1.1.01 on WinNT4.0 (MS Exchange Server
5.5)
Im looking for any help please !!!
-
01/19/2001 0
HelloAll !
on a linux client
Tivoli Storage Manager (TSM)
Linux86 Backup-Archive Client
Version 4, Release 1, Level 2
we have the problem that files which contains
German Umlaute ( eg รค ) are not backed up
The corresponding error message in the dsmerror.log shows eg.
08-01-2001 21:38:07 fioSca
> The PROBLEM with the ADSM implementation is that the client first
> sends (almost) 50 MB of the file to the server, before the server
> discovers that it doesn't really want to backup the file.
> This is really hurting our backups, because the files excluded
> by size are in excess of 100GB, and
The RedPiece states:
"Backups taken while a user is logged on locally at the system console will
fail
for the user profile file ntuser.dat for the current logged on user.
Restoration
of the user's profile from that backup session will not be possible."
If the system ojbect is backed up when a us
> We recently included four new Magstar drives to an existent 3590 library
> that is being used in our mainframe environment, to allow us use it also
> with our TSM.
>
> We connected and configured it and it seems to be ready for use, but I
> cannot manage to check in any tape.
>
> When I try to l
Claudio,
A return code 310 means that the Exchange Server reported
a problem. You should closely examine the TDP for
Exchange log file on the Exchange Server having the problem.
This is normally located in the installation directory
for TDP for Exchange (unless you changed it)
and is called, by
Situation:
TSM server 3.7.3, TSM client 3.7.3, AIX 4.3.3
This NTwrkstn (my wrkstn, I can run Admin web client browser access ok.
http://TSMserver:1580). Everything works OK. NO problems communicating
w/TSM server.
I have also installed on this wrkstn TSM NT client 3.7.3. The GUI interface
runs
Is the "TSM Client Acceptor" service running ?
Ruddy
-Original Message-
From: Ken Sedlacek [mailto:[EMAIL PROTECTED]]
Sent: jeudi 25 janvier 2001 17:55
To: [EMAIL PROTECTED]
Subject: TSM 3.7.3 web client browser access probs??
Situation:
TSM server 3.7.3, TSM client 3.7.3, AIX 4.3.3
I am not clear as to whether the TSM server is running on the same machine
as your workstation. If the TSM server is running on a different machine,
then you need to install and configure the client code on the TSM server
machine.
Regards,
Andy
Andy Raibeck
IBM/Tivoli
Tivoli Storage Manager Cli
Sorry for the repost, but it should read
Remark that the last entry seems to be invalid (ACTUAL_START precedes
SCHEDULED_START !)
instead of
Remark that the last but one entry seems to be invalid (ACTUAL_START precedes
SCHEDULED_START !)
Xavier
___
Hi,
The follo
I'm running my sun server3.7.36 on a sun e10k and I'm having what appears
to be initializaion problems.
Where can I start looking for the errors there doesn't appear to be any
error logs in the Bin directrory and I don't see it pointing to any other
place?
Have you tried starting dsmserv from the command prompt rather than as a
daemon? That will often yield the answer. Make sure the daemon isn't
started. Then cd to the server director /tivoli/tsm/server/bin directory
and type dsmserv. This will start the server in the foreground. This is
probab
Nothing I've seen or heard indicates this is going to happen within the next
week. I guess I would recommend installing on Windows NT for now and
upgrading to 2000 later. If the only thing running on the system is TSM,
this is not a bad option. The upgrade, even if it is a complete re-install
f
To use the Web Client, you connect to the node you are interested in not the
server.
So you should connect to http://wrkstn:1581
Tim Rushforth
City of Winnipeg
-Original Message-
From: Ken Sedlacek [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 25, 2001 1:36 PM
To: [EMAIL PROTECTED]
Hopefully this is an easy one.
Does the server command "disable sessions" carry across the server halt and
restart,
or does it have to be reentered after the restart?
Thanks,
Frank
Frank McClean
[EMAIL PROTECTED]
916.658.1353
I am sorry I left so much relevant info out of my first email on this same
subject.
Lets try this again:
TSM server Environment:
TSM 3.7.3 server running on RS6K H70, AIX 4.3.3
TSM Client Environment:
NT4 Wrkstn running TSM client 3.7.3.
I have the client GUI running a scheduled backup with
In order to perform client operations on machineX via your web browser, you
need to (1) configure the Web client on machineX, and (2) point your
browser to machineX.
Therefore, if you wish to perform client operations on you workstation, you
need to point your browser to your workstation. If you
Thank you Andy Raibeck of IBM/Tivoli-Tivoli Storage Manager Client
Development.
It is working as you stated.
If I might be so bold in asking, I looked at the "Getting Started with
Tivoli Storage Manager: Implementation Guide" redbook, and the "Tivoli
Storage Manager Quick Reference for Backup-Ar
Thank you.
It is working as you stated.
Ken Sedlacek
Kyrus Corporation
Office: 864-322-4260; Cell: 864-444-8375
Text Page: 864-444-7243, follow prompts
[EMAIL PROTECTED]
Kyrus IT Support (Internal: 4399) (Greenville: 864-322-4399)
(Toll-Free: 888-413-4399)
"Rushforth
You are welcome, I'm glad to hear that worked.
I am not sure why you could not find this. I just checked the redbook
online at http://www.redbooks.ibm.com, and according to section "10.5.4.3
Web Client":
To access the web backup/archive client, start your Web browser. In the
Location or Address
Kelly,
Thanks for the suggestion, I tried that and the server seems to hang
mounting the recovery log volume. I checked to see if the recovery log
volume exists and it does. But how does TSM know where to look for the
recovery log volume? Is there aything else I should look at?
"Kelly J. Lipp
The server knows where to look by checking a file called dsmserv.dsk. Do
you have a good, recent, database backup? If so, you can do a server
recovery from that. That will rebuild the log file and you should be ok.
Kelly J. Lipp
Storage Solutions Specialists, Inc.
PO Box 51313
Colorado Springs
Hello group,
I am about ready to give up ... we have upgraded our Netware 5.x servers
to either 4.1.1 or 4.1.2. It is not a pretty site. On both our
production NDS tree and our test NDS tree we are experiencing the
following problem. I have to say I am at a loss. I see nothing wrong
with the
try deleting all the .pwd files in the install directory and trying again...
Mark
-Original Message-
From: Peter Hadikin [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 25, 2001 5:31 PM
To: [EMAIL PROTECTED]
Subject: Netware backups with 4.1.x ... help me ... I'm drowning!!
Hello g
Just upgraded from ADSM 3.1 to TSM 4.1 on an AIX server.
I can't get the drives on line. I execute the command:
update drive pdc2_stklib acs0 device=/dev/mt0
and I get: ANR8420E
An I/O error occurred while accessing drive ACS0.
I have gone to Smit, and re-generated the devices, /dev/mt0 ...
I did try this ... thought the same thing myself. The .pwd files tend
to accumulate. Same results. No beer for that one. Next contestant
please!!
Take it easy, Peter
"Remeta, Mark" <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 25/01/2001
02:48:40 PM
Please respond to "ADSM: Dist Stor Manager" <
Try running cfgmgr.
Also recall the note in the v4.1 README document about the Atape upgrade
may be required.
Ken Sedlacek
Kyrus Corporation
Office: 864-322-4260; Cell: 864-444-8375
Text Page: 864-444-7243, follow prompts
[EMAIL PROTECTED]
Kyrus IT Support (Internal: 4399) (Greenville: 86
I recall a similar problem that I had recently. I don't recall if I had to
remove and recreate the client password, but I do remember some problems
with the order that I loaded modules. I had to unload all of the NetWare
TSM modules, and then load them in a specific order. Below is the order
th
Across a server restart after a "disable sessions" command has been issued,
sessions are re-enabled. (availability goes to "enabled" again.)
At 11:38 AM 1/25/2001 -0800, you wrote:
>Hopefully this is an easy one.
>
>Does the server command "disable sessions" carry across the server halt and
>res
Gretchen L. Thiele writes:
> The short answer appears to be "not very well".
>
> We've had a myriad of problems with our Mac clients. First
> the scheduler and now the inability to restore folders.
> Granted, we are running ADSM v3.1.2.5x on VM, but support
> assured me that v3.7 and even v4
44 matches
Mail list logo
