05/01/2009 11:13 AM
Please respond to
ADSM-L@VM.MARIST.EDU
To
ADSM-L
cc
Subject
Re: [ADSM-L] Tape Drive SN issue
No, tape and disk reside on different fabrics. There are 7 tape HBAs, 3
of which go to physical tape, two of those have drives with this problem.
Andy Huebner
-Origin
! (TSM 5.4.1 at the time)
Regards,
Shawn
Shawn Drew
Internet
andy.hueb...@alconlabs.com
Sent by: ADSM-L@VM.MARIST.EDU
05/01/2009 11:13 AM
Please respond to
ADSM-L@VM.MARIST.EDU
To
ADSM-L
cc
Subject
Re: [ADSM-L] Tape Drive SN issue
No, tape and
, 2009 1:29 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Tape Drive SN issue
I am not aware of this problem. Are you putting disk and tape under the
same HBA?
Regards,
Jo Lay
Tivoli Storage Products, IBM Software Group
jo...@us.ibm.com
This e-mail (including any attachments) is
n't need to LIP as often.
[RC]
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Dwight Cook
Sent: Thursday, April 30, 2009 7:54 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Tape Drive SN issue
You are aware that under AIX if any WWN in the
I am not aware of this problem. Are you putting disk and tape under the
same HBA?
Regards,
Jo Lay
Tivoli Storage Products, IBM Software Group
jo...@us.ibm.com
April 30, 2009 11:58 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Tape Drive SN issue
Hi, Andy. Going back to simple, in addition to deleting the paths, did
you also delete and redefine your drives? I'm just double-checking
because I don't see it explicitly mentioned in the thread
Jo Lay
Sent: Thursday, April 30, 2009 11:07 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Tape Drive SN issue
Ok, you might want to resolve the SAN Discovery issue on your machine.
This will save you time in the long run. BTW, what is the issue for SAN
discovery?
Regards,
Jo Lay
Tivoli
Of
Ochs, Duane
Sent: Thursday, April 30, 2009 12:02 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Tape Drive SN issue
You can issue a show library command from a TSM prompt. For detailed
info that is not always represented in TSM.
I've used this to see if tapes are stuck in older DLT drives.
Bu
t.edu] On Behalf Of
Alex Paschal
Sent: Thursday, April 30, 2009 11:58 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: Tape Drive SN issue
Hi, Andy. Going back to simple, in addition to deleting the paths, did
you also delete and redefine your drives? I'm just double-checking
because I don't se
T WORTH,IT
Sent: Thursday, April 30, 2009 8:22 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Tape Drive SN issue
The drives were verified in AIX after GBic change. Since there was not
a port change there was no effect on AIX.
The library is aware of all of the drives. I think I mentioned ea
riginal Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Huebner,Andy,FORT WORTH,IT
Sent: Monday, March 30, 2009 11:18 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Tape Drive SN issue
The error occurs when TSM attempts to mount a tape. We have had no
problems dele
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Jo
Lay
Sent: Thursday, April 30, 2009 10:39 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Tape Drive SN issue
Andy,
Do you have TSM SAN Discovery turned on?
If you do, you can perform "q SAN" and look for the drive ser
We had to turn off SAN discovery due to other issues.
Andy Huebner
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Jo Lay
Sent: Thursday, April 30, 2009 10:39 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Tape Drive SN issue
Andy,
Do you
Sent: Thursday, April 30, 2009 9:54 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Tape Drive SN issue
You are aware that under AIX if any WWN in the path of a drive changes,
then
that constitutes an entirely new device as seen by AIX. If you replaced
GBics, it possibly could have caused the
Subject: Re: [ADSM-L] Tape Drive SN issue
You are aware that under AIX if any WWN in the path of a drive changes, then
that constitutes an entirely new device as seen by AIX. If you replaced
GBics, it possibly could have caused the tape drive to take on a new rmt as
seen under AIX unless you
--Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Huebner,Andy,FORT WORTH,IT
Sent: Thursday, April 30, 2009 9:40 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Tape Drive SN issue
Update:
We turned on TapeAlertMSG - no new messages
We have changed the
30, 2009 11:18 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Tape Drive SN issue
The error occurs when TSM attempts to mount a tape. We have had no problems
deleting and defining these paths, which I should have included in the first
message.
Andy Huebner
-Original Message-
From
: Monday, March 30, 2009 10:53 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Tape Drive SN issue
I assume these message occur when you try to define the path?
Kelly Lipp
CTO
STORServer, Inc.
485-B Elkton Drive
Colorado Springs, CO 80907
719-266-8777 x7105
www.storserver.com
-Original
Hi,
after reset of the drives, for one of these drives i would now
try toremove the path/remove the drive+
define drive / define pathe again?
So that the serial-number could be found/checked-in again properly
regards
Rainer
Huebner,Andy,FORT WORTH,IT schrieb:
We have a three drive
-Andy Huebner wrote: -
>We have a three drives that generate these messages and we are unable
>to use the drives because the path will not stay on-line. We have
>not been able to find a solution to this problem.
>
>03/30/2009 04:30:41 ANR8963E Unable to find path to match the serial
>num
,FORT WORTH,IT
Sent: Monday, March 30, 2009 9:50 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Tape Drive SN issue
We have a three drives that generate these messages and we are unable to use
the drives because the path will not stay on-line. We have not been able to
find a solution to this problem
We have a three drives that generate these messages and we are unable to use
the drives because the path will not stay on-line. We have not been able to
find a solution to this problem.
03/30/2009 04:30:41 ANR8963E Unable to find path to match the serial number
defined fo
22 matches
Mail list logo
