Andrew Ferris wrote:
Good luck with IBM and could you let us know if they find the bug?
No fix yet but an APAR has been opened:
http://www-1.ibm.com/support/docview.wss?uid=swg1IC48918
Andrew Ferris
Network Support Analyst
iCAPTURE Research Centre
University of British Columbia
Yeah it's the same with me. Once the server is up, DSMCAD and DSMC run
just fine.
Andrew Ferris
Network Support Analyst
iCAPTURE Research Centre
University of British Columbia
>>> [EMAIL PROTECTED] 2/28/2006 7:32:44 am >>>
Timothy Hughes wrote:
> Ok...For the most part this seems to be a NW 6.5SP
Timothy Hughes wrote:
Ok...For the most part this seems to be a NW 6.5SP5 issue
I know it has been mentioning but when this situation occurs
does a manual load of the dsmcad at the prompt work
every time?
Yes, works every time from the prompt for us.
Just need to know before I upgrade to t
Ok...For the most part this seems to be a NW 6.5SP5 issue
I know it has been mentioning but when this situation occurs
does a manual load of the dsmcad at the prompt work
every time? Just need to know before I upgrade to the
5.3.012 client.
Thanks
Thanks
Patrick Boutilier wrote:
> Timothy
We've had lots of problems with Netware TSM clients in general at all
different sorts of levels for both TSM and Netware.
But I just wanted to suggest that one possible solution, which has
solved a lot of our problems with TSM clients abending and hanging (and
otherwise acting crappy) has been th
Timothy Hughes wrote:
Thanks Patrick!
We one Novell client that uses 5.3.0
The NW OS is 6.5SP2
The above loads dsmcad out of autoexec.ncf fine?
Another Novell client is at 5.3.03
NW OS5.1 SP7
Haven't notice a problem as of yet.
Andrew Ferris wrote:
You're not crazy. I'm seeing it too. I only had one SP5 server and I've
just upped the client on it from 5.2.3 to 5.3.2 and it will not load on
boot.
Version 5.03.02 Sunday, September 18, 2005
Module DSMCAD.NLM load status OK
ANS1398E Initialization functions cannot open o
You're not crazy. I'm seeing it too. I only had one SP5 server and I've
just upped the client on it from 5.2.3 to 5.3.2 and it will not load on
boot.
Version 5.03.02 Sunday, September 18, 2005
Module DSMCAD.NLM load status OK
ANS1398E Initialization functions cannot open one of the Tivoli Storag
Thanks Patrick!
We one Novell client that uses 5.3.0
The NW OS is 6.5SP2
Another Novell client is at 5.3.03
NW OS5.1 SP7
Haven't notice a problem as of yet.
Patrick Boutilier wrote:
> Timothy Hughes wrote:
> > Is this just specific to 5.3.2.x? I am planning on upgrading
> > some Novell client
Timothy Hughes wrote:
Is this just specific to 5.3.2.x? I am planning on upgrading
some Novell clients from 5.2.2 to 5.3.012 next week.
I have seen the problem on both 5.3.0.0 and 5.3.012 as well. Problem is
the server has to be rebooted for the problem to show up. And any
changes you make fo
Is this just specific to 5.3.2.x? I am planning on upgrading
some Novell clients from 5.2.2 to 5.3.012 next week.
TSM 5.3.2.1
TSM novell client 5.2.2
NW 6.5 SP2
Thanks in advance!
Patrick Boutilier wrote:
> Richard Sims wrote:
> > I'm Netware-ignorant, but this sounds like an install prob
Richard Sims wrote:
I'm Netware-ignorant, but this sounds like an install problem: see if
you can review what transpired in the install, and check the Readme
file for any gotchas.
Not an install problem since dsmcad loads fine from command prompt, just
not autoexec.ncf
To employ a Unix analo
I'm Netware-ignorant, but this sounds like an install problem: see if
you can review what transpired in the install, and check the Readme
file for any gotchas.
To employ a Unix analogy, it might work as a circumvention if it
could be started by doing a 'cd' to the client directory first, then
lau
Andrew Ferris wrote:
We throw a delay of 3 or so in and we're also running clustered servers so the
clustering in 6.5 takes a looong time to start up. We're also loading McAfee
too so there's a fair bit of stuff to get through before the CAD. I've only
just started running SP5 as it has a NSS
We throw a delay of 3 or so in and we're also running clustered servers so the
clustering in 6.5 takes a looong time to start up. We're also loading McAfee
too so there's a fair bit of stuff to get through before the CAD. I've only
just started running SP5 as it has a NSS fix for a NFS/HSM locki
Andrew Ferris wrote:
We're running 8.7.3.7 smp. I know that in our case our dsmcad loads right at
the end of stage 5.
Same version of edir here. Interesting that your dsmcad loads after
stage 5. According to Novell the autoexec.ncf is loaded in stage 4.
http://support.novell.com/techcenter/a
We're running 8.7.3.7 smp. I know that in our case our dsmcad loads right at
the end of stage 5.
Andrew Ferris
Network Support Analyst
iCAPTURE Research Centre
University of British Columbia
>>> [EMAIL PROTECTED] 2/24/2006 9:57:56 am >>>
Andrew Ferris wrote:
> When are you trying to load dsmc
Andrew Ferris wrote:
When are you trying to load dsmc in autoexec.ncf? We load dsmcad as the last
item in our autoexec.ncf after adding the search path to the client files.
Right at the end of autoexec.ncf, just before "stage5". We even tried
adding some delay but that didn't help. What versi
When are you trying to load dsmc in autoexec.ncf? We load dsmcad as the last
item in our autoexec.ncf after adding the search path to the client files.
Andrew Ferris
Network Support Analyst
iCAPTURE Research Centre
University of British Columbia
>>> [EMAIL PROTECTED] 2/24/2006 8:58 am >>>
Troy
Troy Frank wrote:
Have you tried moving the entire section of backup commands to the
bottom of the autoexec.ncf? Could just be a load-timing issue. So that
the bottom of the autoexec, you'd have something like this...
search add sys:\tivoli\tsm\client\ba
smsstart
dsmcad
Yup. Tried that.
Have you tried moving the entire section of backup commands to the
bottom of the autoexec.ncf? Could just be a load-timing issue. So that
the bottom of the autoexec, you'd have something like this...
search add sys:\tivoli\tsm\client\ba
smsstart
dsmcad
>>> [EMAIL PROTECTED] 2/24/2006 10:58 AM
Troy Frank wrote:
We're running tsm5.3.2-fix2 on several nw6.5 servers here (various patch
levels). I can't say I've ever seen the issue you mention. When you
say you're starting dsmc from autoexec.bat, do you really mean dsmcad?
dsmc sched
dsmcad does the same thing though. Same errors fr
We're running tsm5.3.2-fix2 on several nw6.5 servers here (various patch
levels). I can't say I've ever seen the issue you mention. When you
say you're starting dsmc from autoexec.bat, do you really mean dsmcad?
>>> [EMAIL PROTECTED] 2/24/2006 8:57 AM >>>
Anybody successfully running the 5.3.2.
Anybody successfully running the 5.3.2.x client on Netware 6.5 (sp5) ?
Our problem here is that when dsmc is set to start from autoexec.ncf we
get the following errors. Works fine if you start dsmc after the server
is fully booted. Notice now the server name is missing before \SYS ?
ANS1035S
24 matches
Mail list logo
