I have a shared library tsm environment any ideas???:
03/26/03 23:25:45 ANRD pvrmp.c(1800): ThreadId<48> Attempt to
recover
volume handle for open volume "VR6136".
--Justin Richard Bleistein
Unix/TSM Systems Administrator (Sungard eSourcing)
Desk: (856) 566 - 3600
Cel
7:35 AM
To: [EMAIL PROTECTED]
Subject: Re: K-cartridges besides J-cartridges
and if you've ever had a notch tab fall out and get lost...in a pinch you
can (for a K tape) get the bottom one from a J tape and the top one from a
cleaning tape. The colors will be all out of whack but the slots
ailto:[EMAIL PROTECTED]]
Sent: Wednesday, December 11, 2002 11:47 PM
To: [EMAIL PROTECTED]
Subject: Re: K-cartridges besides J-cartridges
And, if you look at a J and a K tape on the notches you will notice that
they have a different configuration. So, if you put a K tape in a J only
drive, it will
AM
To: [EMAIL PROTECTED]
Subject: Re: K-cartridges besides J-cartridges
Should see a "2X" sticker on the back of your 3590 drive if it is set to
deal with double length tapes. Also the internal tape spool is green (along
with one or two other internal parts, I seem to recall) so you mig
to double check (if you don't find a "2X"
sticker on the drive)
Dwight
-Original Message-
From: Jim Sporer [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, December 10, 2002 4:25 PM
To: [EMAIL PROTECTED]
Subject: Re: K-cartridges besides J-cartridges
There is a difference betw
>At the moment we use about 900 J-cartridges in our library. Is it possible
>to checkin K-cartridges and use them besides the J-cartridges.
To bolster Jim Sporer's reply: yes, it is commonly done. We've been doing
it for quite a while, largely treating the J tapes a "prior generation" and
so best
There is a difference between the J and K tapes and the 3590 drives need to
support the extended length tapes. If the drives are new there is no
problem but older 3590E drives may need an upgrade to support the extended
length tapes. Check with your CE.
Jim Sporer
At 11:12 PM 12/10/2002 +0100,
Hello,
AIX 5.1, TSM 4.2.1.19, IBM 3494 library, 3590E-drives
At the moment we use about 900 J-cartridges in our library. Is it possible
to checkin K-cartridges and use them besides the J-cartridges.
During upgrade from our drives from 3590B to 3590E we changed status of our
volumes to read-only
