Make sure you have current microcode for the drives. We had that recurring unavailable
problem.
>>> [EMAIL PROTECTED] 05/03/01 07:08AM >>>
>We want to use both FC ports of the 3590 drives (connected via a FC
>fabric)in parallel for automatic path fail over. Is this supported by AIX
>and how coul
>We want to use both FC ports of the 3590 drives (connected via a FC
>fabric)in parallel for automatic path fail over. Is this supported by AIX
>and how could this be implemented in AIX. At the moment I see for the same
>drive two definitions in AIX. They are both available but they doesn't
work
>
elf is most likely to fail, not
your connection. I think the cost will not weigh up against the gain.
Ilja Coolen.
-Oorspronkelijk bericht-
Van: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]Namens
Schönacher, Uwe
Verzonden: donderdag 3 mei 2001 12:00
Aan: [EMAIL PROTECTED]
Onderwe
3 mei 2001 12:00
Aan: [EMAIL PROTECTED]
Onderwerp: 3590 question
For all you AIX guru's out there,
I need an additional information on the definition of 3590 FC tape drives to
AIX.
We want to use both FC ports of the 3590 drives (connected via a FC
fabric)in parallel for automatic path
Thank you in advance
Uwe
-Original Message-
From: Steve Harris [mailto:[EMAIL PROTECTED]]
Sent: 02 May 2001 04:54
To: [EMAIL PROTECTED]
Subject: Quick 3590 question
Can anyone tell me how many fibre ports there are on a 3590 with the fibre
attachment?
Thanks
Steve Harris
AIX and
Hi Steve
We just had two new 3590E with fibre channel installed and two older 3590s
upgraded to
E model with fibre channel attachment and all of our drives have two ports
each.
We are only using one of them on each drive currently, though.
Regards
Peter
From: Steve Harris [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, May 01, 2001 10:54 PM
To: [EMAIL PROTECTED]
Subject: Quick 3590 question
Can anyone tell me how many fibre ports there are on a 3590 with the fibre
attachment?
Thanks
Steve Harris
AIX and ADSM Admin
Queensland Health, Brisbane Australia
]
Subject: Quick 3590 question
Can anyone tell me how many fibre ports there are on a 3590 with the fibre
attachment?
Thanks
Steve Harris
AIX and ADSM Admin
Queensland Health, Brisbane Australia
Can anyone tell me how many fibre ports there are on a 3590 with the fibre attachment?
Thanks
Steve Harris
AIX and ADSM Admin
Queensland Health, Brisbane Australia
