If an include/exclude file points to a management class that does not
exisit and the file uses the default management class, what happens when
the correct management class is put in the include/exclude file ? Does the
file get rebound to the new management class ?
Thanks in advance.
Jason
Earlier I posted a question regarding a migration problem I was having
while trying to restore to a 3590 with a tape stacker.
I was encountering a no drives availabel while trying to restore.
To overcome this problem, I had to mark the volume as READ ONLY. The
restore went throught without a hi
Hi,
Hopefully someone can shed some light on this problem.
I am in the process of migrating data from a V3.1 ADSM server connected to
a 3494 library containing 4 * 3590 drives.
I have set up a new ADSM server 4.2.1 to act as a data recovery server.
This server has a 3590 with a stacker attache
All,
We have installed a new TSM 4.2.1 environment at our site.
Our DBA has tried to run an onbar backup using the following command:-
onbar -b -L 0 with the number of parallel backups set to two.
Due to the default number of mount points being set to 1 for a client, this
backup started giving
Hi
This will probably seem like an obvius question.
I have the following config.
TSM Server 1* 100Mb Card servera05
1 * 1000Mb servera05_tsm
TSM Client 1* 100Mb Card server09
1* 1000Mb Card server09_tsm
In my dsm.opt file on the client I hav
In addition to the BACKUP DB, I would recommend a BACKUP VOLHIST and a
BACKUP DEVCONFIG.
Regards Jason
Farren Minns <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 08/02/2002 10:38:56
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECT
The way I have used in the passed is
edit the nodename field in dsm.opt to point to x
Start the command line session and supply x client password.
Hey presto , you should be able to restore the data.
Regards Jason
"PINNI, BALANAND (SBCSI)" <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 07/02/2002
Are you able to export and import the data for the nodes. If you export the
data for the client from the old domain and import into the new domain the
data should be copied to the new storage pool.
Marco Bianchi <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 06/02/2002
19:34:46
Please respond to "AD
Hi everyone,
I would just like to pick every ones brains.
I have the following environment
Source Environment.
TSM 3.1 running on AIX 4.2.1
IBM 3494 Library with IBM3590 Drives.
Server NamesServer1, Server2, Server3, Server4, Server5
TSM 4.1
StorageTek L700 SCSI attached.
Fibre-attached
-
Daniel Sparrman
Exist i Stockholm AB
Bergkällavägen 31D
192 79 SOLLENTUNA
Växel: 08 - 754 98 00
Mobil: 070 - 399 27 51
Jason Morgan
cc:
Sent by: Subject: 9840 element
addresses.
Hi,
Would any one be able to confirm what the element addresses for 6 9840
drives in an L700 would be. ?
Regards Jason
e reply before all your text registered in the
grey noodle.
Is there enough room in /usr?
Have you installed the device drivers for the fcp adapter card?
Jason Morgan
cc:
Sent by: Subject: Tiv
Hi,
I am having trouble the tivoli.tsm.device.fcprte fileset.
I have uninstalled the tivoli.tsm.devices.rte fileset as recommended along
with the messages. I have then tried to install the
tivoli.tsm.devices.fcprte fileset with only the messages being installed.
Has anyone encountered this prob
Hi all,
If a directory has been archived and the archsylinkasfile option has not
been set, is there an option that can be set on the retrieve to only
restore the symbolic links.
Many thanks
Jason
Hi,
Can someone tell me what AIX device drivers are required for the StorageTek
L700 or if any StorageTek device drivers are required ?
Config is AIX 4.3.3 HBA's FC 6778.
L700 containing 6 9840 drives which are fibre attached to SAN . The robot
arm is scsi attached to the server.
The scsi c
Hi,
I have been tasked with configuring a StorageTek L700 into a new TSM
environment.
The environment is as follows:-
TSM Server 4.1 running on AIX 4.3.3. TSM will eventually be upgraded to
4.2.1.
StorageTek Robot SCSI attached to Server.
6 9840 Drives fibre attached to Brockade Switch.
What
/ instance, check the devices on the donating machine to
see if the
number of chunks is consistant with the machine to be backed up to... use
onstat -d as the instance owner...
George Lesho
AFC Enterprises
Storage/System Admin
Jason Morgan <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 0
All,
I have the following error when trying to restore an Informix using On-Bar
Out-of-sequence errors.
32 DBSpaces restore ok but the process fails on the 33rd DbSpace.
Regards Jason
I currently have the following error when invoking the OnBar utility.
exec():0509 - 036 Cannot load program onbar because of the following
errors:
0509-150 Dependant module /usr/lib/ibsad001.a ( bsashr10.o )
could not be loaded
0509 - 152 Member bsashr10.o is not found in ar
We currently have the following configuration.
Site A
ADSM Server 3.1 Server 5
ADSM Client / Informix backup via API/ONBAR Server 10
ADSM Client / Informix backup via API/ONBAR Server 11
ADSM Client Server
Hi,
I am involved in a project to integrate a StorageTekL700 containing 6*9840
Drives to TSM. Everthing is fibre attached to Hitachi 9200 SAN using
Broacade Switches.
The TSM server will be an RS/6000 p-series 660 Server containing 2 6228
HBA's.
I would be interested in hearing peoples exper
he file
> system)
> the pit they are talking about here would be a complete replace of every
> file because it is/was backed up as just one large file (not a whole bunch
> of individual ones) so same results, just differs by the amount of
> internal
> tsm DB overhead and the
restore.
What benefits can the backup image and restore image functions give me.
I can't see any at the moment. Can anyone enlighten me ?
Jason
Jason Morgan
Technical Support Analyst
Blaenau Gwent C.B.C
Telephone: 01495 355230
Email: [EMAIL PROTECTED]
Are there any recommended DB filesizes ? For a 4gig Database would you use
4*1gb on different spindles ? 2*2gb files or 1 4.5gb file ?
> -Original Message-
> From: Cook, Dwight E [SMTP:[EMAIL PROTECTED]]
> Sent: 23 August 2000 12:40
> To: [EMAIL PROTECTED]
> Subject: Re: Database
I am trying to settle an argument with regards to our admin schedules.
Argument 1
1. Overnight schedules.
2. Backup storage pools to copy storage pools
3. Checkout copy pool tapes
4. Backup up database
5. Checkout database tapes
6. Backup volume history and device config
7. Migrate disk pools
And a backup devc, backup volhist and q system output
Jason Morgan
Technical Support Analyst
Blaenau Gwent C.B.C
Telephone: 01495 355230
Email: [EMAIL PROTECTED]
> -Original Message-
> From: Cook, Dwight E [SMTP:[EMAIL PROTECTED]]
> Sent: 08 August 2000 22:52
>
Is it possible to see the date on which a file expires ?
Cheers Jas
isn't
this working.
Jason Morgan
Technical Support Analyst
Blaenau Gwent C.B.C
Telephone: 01495 355230
Email: [EMAIL PROTECTED]
If these tapes were checking from copypool tapes running and checked in to
the library with checkin libv name status=private
Run upd vol a1234 acc=readw. This will delete the volume and return the
volumes to scratch status.
Jason Morgan
Technical Support Analyst
Blaenau Gwent C.B.C
Just issue
update libv STATUS=SCRATCH for the volumes you just
checked in as PRIVATE.
Regards Jason
Jason Morgan
Technical Support Analyst
Blaenau Gwent C.B.C
Telephone: 01495 355230
Email: [EMAIL PROTECTED]
> -Original Message-
> From: Bhaskarla, Sunil [SMTP:[EMAIL PRO
Have you formatted the space using dsmfmt ?
Jason Morgan
Technical Support Analyst
Blaenau Gwent C.B.C
Telephone: 01495 355230
Email: [EMAIL PROTECTED]
> -Original Message-
> From: david de leeuw [SMTP:[EMAIL PROTECTED]]
> Sent: 23 July 2000 16:30
> To: [EMAIL PROTECTE
31 matches
Mail list logo
