Are there any plans to include more info on tape drive usage, throughputs etc
by node to identify bottlenecks?
Also, to include DRM into the reporting functions for offsite vaulting etc?
Regards,
Jane.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Beh
If the maxscratch was incorrect surely the activity log would indicate that on
the output.
Can the library through the library GUI see the barcodes of the tapes, could be
the cartridge assignment policy is not adapted to enable this barcode range or
the barcode labels are wrong, we have had lab
Cartridge Asssignment policy should allow different number sequences for each
virtual library to stop any problems that you might see, that's what we do.
Also, checkin libvol search=bulk status=scratch checklabel=barcode wait=0
will do it... for scratch anyway.. change as appropriate!
Jane
There needs to be an empty file of that name to write the errors into, you need
to have one for each of the logs mentioned in your dsm.sys file.
Jane.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@vm.marist.edu] On Behalf Of
Ehresman,David E.
Sent: 28 January 2013 20:17
If you take the volrange out of the script won't it allow all media to
checkin?
Regards,
Jane.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@vm.marist.edu] On Behalf Of
Rick Saylor
Sent: 17 February 2012 20:08
To: ADSM-L@vm.marist.edu
Subject: Re: [ADSM-L] Script for
You'll want to look in the TSM log for that node, i.e.
/usr/tivoli/tsm/tdp_r3/ora64/*.log to see if anything was updated here.
Or maybe /oracle/SID/sapbackup (if it's AIX).
You don't tend to get messages at the TSM server end, more the TDP side.
HTH.
Jane.
-Original Message-
From: ADSM:
Hiya -
Is the cover to the i/o station clicked shut, maybe it thinks this is
open?
Or library could have gone out of sync with TSM. We've had this
recently.
We fixed it by:
Shutdown TSM servers (library manager & client).
Force inventory on library in question by opening and shutting door,
res
I'm not aware of one we're stuck on V5.5.2.
Regards,
Jane.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@vm.marist.edu] On Behalf Of
Rainer Holzinger
Sent: 16 March 2011 05:08
To: ADSM-L@vm.marist.edu
Subject: [ADSM-L] TDP for Oracle version 6.x
Hi all,
I'm looking fo
We are running AIX 5.2 on some old legacy systems.
Our TSM installation is TSM V6.2.0.0 server and V6.2.x clients, except
the legacy systems are still on AIX V5.2 with TSM BA Client (AIX)
V5.4.1.
I looked at the compatibility notes and V6.2.0.0 server does not support
V5.4.1 clients bu
We have the same library as you, are the label prefixes different on the
media types and have you set a cartridge assignment policy which means
that the library won't take the media into the logical library without
being told what the sequence of labels are???
Just a thought?
-Original Mess
We are running 6.2.0.0 server with AIX 6.1 TL4 SP2 and have for the last
few months with no issues.
I know that there is an APAR for running iocp & TSM.. here...
http://www.ibm.com/support/docview.wss?uid=swg21444573&myns=swgtiv&mynp=
OCSSGSG7&mync=E
Regards,
Jane.
-Original Message-
F
I've just upgraded my TSM servers on AIX 6.1 to V6.2 Server, I'm now
looking to upgrade my downlevel V5.5 STA's.
The media that comes in the TDP for SAN box seems to be the same as the
server versions, I've looked on the client cd and server cd's for a
fileset similar to the currently i
I have installed 6.2 on AIX 6.1 in the last few days, fine onto two
difference servers, I haven't seen that issue. Have you had anything
useful back from IBM??
Jane Baker
AIX Technical Specialist
AIX/BASIS TEAM
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.maris
I have had to redefine all the paths to drives & from storage agents to
each drive in the past, when I get reservation conflicts it generally
takes a path offline for that server, I found that running tapeutil -f
/dev/rmtx reset would reset the state of the device at the o/s level
then removing and
ber - exclude.dir
'c:\notsm'.
Existing client opt has 7 sequence numbers
Tim
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu]on Behalf Of
Baker, Jane
Sent: Thursday, May 27, 2010 10:57 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: adding sequence
>>-UPDate CLIENTOpt--option_set_name--option_name--->
>--current_sequence_number--new_sequence_number><
So upd cliento optionset1 Exclude . 2
That should work I think.
Cheers,
Jane.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.
We were recently offered a capacity based licensing model where it was
correlating with the size of our primary storage pools?? Which then can
have growth percentages added to it for forward planning.
Might be worth asking about that too?? Sounds like a nightmare to manage
when you have multiple h
We are currently running TDP for ACS V5.4.1 on AIX 5.3 TL8, with TSM
server V5.5 & API 5.5/Client 5.5 with no issues.
We are upgrading our AIX on these servers to V6.1 TL4.
Is anyone successfully running with the TDP for ACS V541 and a level of
AIX in the 6.1's??
Or indeed if anyone
We are planning to upgrade from V6.1 Server & Clients.
However, we still have some AIX 5.2 boxes that are stuck on V5.4 client.
Can you tell me if V5.4 client will backup & restore from a V6.1 Server?
Can't see it's that obviously put in the docs I've got but maybe I'm not
looking in the right pl
We have a TS3500 which is physically partitioned to allow for LTO2 &
LTO3 mixed media. We're planning on replacing the LTO3 drives with LTO4
drives early in January and obviously we'll need to balance the number
of LTO3 & LTO4 tapes in the library as the data migrates to LTO4. Is it
possible to s
We use LTO2 & LTO3 in a 3584 and the CE always sets the serial number to
match the old one so that we don't have this problem, same as Sean.
Regards,
Jane.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Len Boyle
Sent: 08 July 2009 18:30
T
st.edu] On Behalf Of
Richard Sims
Sent: 30 June 2009 14:48
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Query on ultrium cleaning cartridges
On Jun 30, 2009, at 9:39 AM, Baker, Jane wrote:
> CLNU030L1
That's 9 characters - no good.
Your TS3500 Introduction and Planning Guide manual details
Library type: TS3500.
TSM: 5.4 Server & clients.
Cleaning cartridge part number:35L2086 for use with Ultrium 1,2,3 & 4
drives.
-
We have a 3584 with LTO2 & LTO3 which we use via logical partitioning,
it works really well so would recommend that?
As said previously as long as you have separate device classes and
control paths neither will intermix.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads.
> arises , i will have to edit dsm.sys file.Also there will not be any
> information about data of this node on new server.
>
> On Fri, Mar 13, 2009 at 8:24 PM, Baker, Jane
> wrote:
>
> >
> > If it's at client file level, change the dsm.sys to point to the
oth
If it's at client file level, change the dsm.sys to point to the other
TSM server and connect via baclient using 'dsmc -virtualn=nodename you
are pretending to be'...
This will then connect to TSM server y as the client you're pretending
to be.
HTH.
-Original Message-
From: ADSM: Dis
http://www-01.ibm.com/support/docview.wss?rs=663&uid=swg21259460
This may help you.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Abayomi Oni
Sent: 02 March 2009 12:44
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] TS error - ANR1330E and ANR13
You need to run q pr from the TSM interface to see processes.
Jane.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
ashish sharma
Sent: 11 February 2009 16:02
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] cannot run command
Hello,
The o/p
I'm trying to configure admin assistant on TDP for ERP V5.4. I've got
the installation guide. I have configured the server but can't find a
lot of info on getting the clients connected? does anyone know of any
useful locations for docs??
Thanks in advance.
Please check that this email is addr
You have two volumes on-site marked as unavailable, probably because of
media errors you can try to update these and re-use them by using 'upd
vol 'volname' acc=readwrite'.
Likewise you have a few in the on-site-pool that are readonly which you
can also set to readwrite?
You could also try migr
Baker, Jane would like to recall the message, "[ADSM-L] Install TSM Client in
other directory ...".
Please check that this email is addressed to you. If not, you should delete it
immediately as its contents may be confidential and its disclosure, copying or
distribution unlawfu
Try linking en_US to en_GB?
Jane Baker
AIX Technical Specialist
AIX/BASIS TEAM
Tel :01458 842960
Ext :x 2960
Mobile: 07768 153272
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
TSM User
Sent: 05 June 2008 10:32
To: ADSM-L@VM.MARIST.
I don't have knowledge of the TS3500's but do have logical library
partitioning, have you tried comparing the element addresses as shown in
a 'q libvol' to the web interface ones, you said you performed an
'inventory' is this in the form of an 'audit libr command at TSM level'
which should eliminat
.
"Baker, Jane"
<[EMAIL PROTECTED]
S.COM>
To
Sent by: "ADSM: ADSM-L@VM.MARIST.EDU
Dist Stor
cc
Manager"
<[EMAIL PROTECTED]
Subject
.EDU> Re:
We use DS storage with AIX, SAP & use flashcopy backups.
Using the TSM TDP for mySAP and the TSM TDP for ACS. You need to
configure CIMOM on a server, we do this on our TSM server and mount the
disks here, allocate the disks to the cimom server and NFS mount across
relevant filesystems to provi
The checkin will work with search=bulk but it will have prompted you and you
needed to reply, q req will show prompts and if you then issue reply (number)
it will go, alternatively you can put waitt=0 on the end to stop it prompting
(presuming you have TSM 5.3).
HTH.
-Original Messag
We too have a mix of lto2 & lto3's in virtual libraries.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Ribeiro, Ricardo
Sent: 12 November 2007 14:58
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Mixing LTO2 LTO4 in 3584 libr
Yes... Do you have
Yes, that is my understanding!
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Don Dietz
Sent: 09 August 2007 01:18
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] ISC
As I understand the ISC console thus far, this is the default behavior.
When addi
We found when we changed the library config (only logically) they told
us to re-configure, library defs, drives and paths but we didn't need
to.
We did need to run the 'update library serial=autodetect' to get it to
find it's new serial number as it is somehow linked to the slot number
or numbers
Usually it means the password is out of sync, update the node password at
the TSM side and on the node fire up dsm and under utilities select change
password (you need to know the old password though) failing that you will
need to remove and recreate node data potentially on both sides to reset if
Hi -
In the Performance Tuning Guide this states that the 'buffer pool size may
not exceed 10% of physical memory on AIX'
Also, Recommended values are included in a table dependent on your amount of
physical memory, but max in MB is 256 assuming you have 2048MB of memory.
They may have somet
41 matches
Mail list logo
