We have not had an issue with the clients set to prompted and issuing a define
clientaction NODE action=i on the TSM server.
Sometimes there is a few minutes between the command and the start of the job.
Andy Huebner
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.mari
Bingo, Wanda!
--
Mr. Lindsay Morris
Principal
www.tsmworks.com
919-403-8260
lind...@tsmworks.com
On Jan 9, 2009, at Jan 9, 4:01 PM, Wanda Prather wrote:
On Fri, Jan 9, 2009 at 3:45 PM, Kauffman, Tom
wrote:
Specifically, I'd like to get the byte-count backed up to my off-site
copygrou
On Fri, Jan 9, 2009 at 3:45 PM, Kauffman, Tom wrote:
> Specifically, I'd like to get the byte-count backed up to my off-site
> copygroups by node name withing storage pool.
>
> The file count would be nice, but I'll setlle for the byte count.
tsm: TSMSERVER1>select stgpool_name,node_name, ca
Servergraph shows you the occupancy by node, for on-site and offsite
pools.
If you measure these two things right after a backup stgpool
completes, they ought to match.
(if you let a backup run, then they won't, of course.)
You don't need Servergraph to do this, just a query occupancy with
some g
Specifically, I'd like to get the byte-count backed up to my off-site
copygroups by node name withing storage pool.
The file count would be nice, but I'll setlle for the byte count.
I'd also like to be able to get the start/end times and total data transfer by
process.
Is any of this readily
Hmmm. Bet you haven't seen the end of this yet.
I mean, I could always get the schedule to start up immediately
if I bypassed dsmcad and ran "dsmc sched" on the client.
--
Mr. Lindsay Morris
Principal
www.tsmworks.com
919-403-8260
lind...@tsmworks.com
On Jan 9, 2009, at Jan 9, 2:53 PM, K
Richard,
I hadn't restarted dsmcad. Once I did, and reset the starttime to
'now', the schedule started immediately.
With thanks and all my very best wishes,
Keith Arbogast
On Jan 9, 2009, at 2:17 PM, Keith Arbogast wrote:
01/09/2009 09:36:49 (dsmcad) Dsmcad is working in Webclient mode.
Atsa no good. Needs to beSchedule mode
Make sure you restarted CAD with the right options file and pointing
to the right stanza.
Richard Sims
I have often seen the same problem.
Once, I turned on some tracing and found that dsmserv checks every 30
seconds for events it should be starting, but it still didn't start
the event until 10 minutes later.
Using schedmode prompted, not polling;
dsmc has recently stopped and started;
it's an an
Richard,
Thank you for the suggestions. We corrected the Managedservices
option, and reran the backup attempt by updating starttime to 'now'.
Still no activity. Here is the client's dsm.sys file after the
correction.
Keith
cat dsmwebcl.log
01/09/2009 09:36:49 (dsmcad) IBM Tivoli Storage Manager
0
Yes, I just configured the DBbackup expire date(DRMDBBACKUPEXPIREDAYS) and yes,
I have lots to read :)
Thanks
>>>
From: Richard Sims
To:
Date: 1/9/2009 2:05 PM
Subject: Re: [ADSM-L] Scratch volumes - TAPE - DB
Before you do anything, review how you set up your DB backups. If
they were throu
Thank you. It worked perfectly! :)
>>>
From: "Gee, Norman"
To:
Date: 1/9/2009 1:19 PM
Subject: Re: [ADSM-L] Scratch volumes - TAPE - DB
Delete Volhistory Todate=Today-n Type=DBBackup
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Ramiro Ruiz
Before you do anything, review how you set up your DB backups. If
they were through DRM, you should be employing DRM regimens to expire
them, rather than interfere with Delete Volhistory. And your DB
backup retention needs to mesh with all server recovery elements,
particularly Reusedelay. Keep
Delete Volhistory Todate=Today-n Type=DBBackup
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Ramiro Ruiz
Sent: Friday, January 09, 2009 10:15 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Scratch volumes - TAPE - DB
Hello,
We setup TSM 5.5.1 a few m
Hello,
We setup TSM 5.5.1 a few monts ago, but I fear that I have made an error in the
configuration... hopefully somebody can let me know that there is an easy fix!
In the TSM maintenance plan script, I selected a TAPE device class. Now when I
view our volumes, in the tape library, there are d
.
I had to think of our friend Andy Raibeck's signature line when I read
this article in STORAGE magazine, which really applies to TSM even
though it does not mention it.
A lot of us (most of us?) wouldn't think of any other administrator
interface to TSM other than the command line, and we contin
Greetings,
Have you checked to verify that the TSM server and the TSM client have exactly
the same time? Is it possible that the TSM server has the correct time, and
the TSM client's time was set incorrectly, and is exactly 12 hours off? Or it
has the correct apparent time, but is set to the
Richard Sims pointed out the discrepancy between midnight and noon in your
apparent scheduled start times, which is certainly worrying.
I also notice that your scheduler is not starting up until almost 25 minutes
after the scheduled start time. Why is that?
If your startup window is short (say,
On Fri, 9 Jan 2009, Richard Sims wrote:
On Jan 9, 2009, at 11:35 AM, Alexander Lazarevich wrote:
ANR8355E I/O error reading label for volume ITG043L2 drive MT1.0.0.4
(mt1.0.0.4).
Did you label this and other tapes which are new to the library before
trying to use them with TSM?
Yeah, all t
Done. That's the way I expected it to work, but I just wasn't sure. I
looked through logs, and the previsous entry for the tape was a "deleted
from stg pool", so that means it was an empty tape, but I just wanted
confirmation for you geniuses...
Thanks!
Alex
On Fri, 9 Jan 2009, Wanda Prather wr
On Jan 9, 2009, at 11:35 AM, Alexander Lazarevich wrote:
ANR8355E I/O error reading label for volume ITG043L2 drive MT1.0.0.4
(mt1.0.0.4).
Did you label this and other tapes which are new to the library before
trying to use them with TSM?
Richard Sims http://people.bu.edu/rbs/
No worries.
If TSM had already put data on the tape, you would have gotten a different
message, TSM would not have called it a scratch tape.
And TSM will not LET you update the tape to Scratch if there is any valid
data on it.
Just do:
UPDATE LIBV libname ITG043L2 STATUS=SCRATCH
On Fri, Jan 9, 2
TSM 5.3.4 on Windows 2K server.
Library is Overland Neo 4000 with 2 HP LTO2 drives.
I've got a libvol LTO2 that was marked as "private" by the server due to a
drive error:
ANR8944E Hardware or media error on drive MT1.0.0.4 (mt1.0.0.4) with
volume ITG043L2(OP=READ, Error Number= 1117, CC=306, KE
Keith -
You don't say if your client MANAGEDServices option is properly set
for scheduling. Check that, and the dsmwebcl.log, and the server
Activity Log if nothing evident in that CAD log.
Richard Sims
I would like to run a client schedule defined on the server at an
arbitrary 'starttime'. I need to do this periodically to test client
options, debug connection problems and the like. To date I have not
been successful. My procedure has been: associate a node with a test
schedule; update the test
If you are only occasionally moving old volumes, you could just run a script
that builds the command and manually paste it to the command line.
select volume_name, date(last_write_date) as "Oldest Volume" from volumes
where last_write_date=(select min(last_write_date) from volumes)
select 'MOV
The first thing you need to look into is why your EVANPDC_DAILY_INCR
schedule seems to be defined for a start time of midnight in one
instance, and noon in another. Do you have something automated
changing the schedule definition? I should think that a "daily"
schedule would be defined to run on
Hi,
since a few weeks we have a strange behaviour with one of our Backup-Clients.
When the scheduler should start, the clients says that the scheduler is out of
time and plans the
next window start:
01/08/2009 21:03:50 --- SCHEDULEREC QUERY BEGIN
01/08/2009 21:03:50 --- SCHEDULEREC QUERY END
01
dear all,
thanks for your answers, so i think i'll only touch the 3590-tapes used
for archive, because the tapes are 9 years old :-)
David E Ehresman wrote:
> I have a simplistic korn shell script that does this that I could share
> with you if you are interested.
>
> David Ehresman
>
sure,
30 matches
Mail list logo
