> -Original Message-
> From: Rainer Holzinger [mailto:[EMAIL PROTECTED]
> Sent: Thursday, December 01, 2005 2:54 PM
> To: 'ADSM: Dist Stor Manager'
> Subject: RE: [ADSM-L] TDP for Oracle on Linux
>
> Thanks again Richard,
>
> to summarize:
>
> no manual avaiable for verios 5.2.4 or 5.
Hello TSMers.
We have 2 problem Macs running Mac OS X 10.4.3 and the 5.3.2 TSM
Client. One is accessing a 5.2.2 TSM server on AIX 5.1.0.0. The other
is accessing a 5.3.1.3 TSM server on AIX 5.2.0.0.
When you set up the Client with PasswordAccess Generate and install
the Scheduler (dsmcad), the C
Both of these have great technical speakers presenting..
TSM Administration Center
Monday 05-Dec-05 10:00 AM CT, 11:00 ET, 14:00 BT, 15:00 CET
Making Friends with TSM Administration Center. TSM 5.3 introduced a new GUI to
be used when administering ITSM. This presentation will cover hi
Thank you, I didn't think about the possibility of a restartable
restore. That fixed it.
Kelly
On 12/1/05, Thorneycroft, Doug <[EMAIL PROTECTED]> wrote:
> You might have a restartable restore session sitting out there
> issue q restore and see if there is a restartabel restore sessing
> (The ses
Also, check out chapter 7.2.3 of the redbook.
http://www.redbooks.ibm.com/redbooks/SG246268/wwhelp/wwhimpl/java/html/wwhelp.htm
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Sung Y Lee
Sent: Thursday, December 01, 2005 4:21 PM
To: ADSM-L@VM
Not sure about Windows configuration, but on Solaris I have path defined to a
drive for library communication and then one for each drive configuration.
The one for the library configuration will used one of the drives defined as
the "Control Path".
DEFINE PATH WSALEM2 3584LIB1 SRCTYPE=SERV
A very nice step by step redbook.
Implementing IBM Tape in Linux and Windows
http://publib-b.boulder.ibm.com/Redbooks.nsf/RedpieceAbstracts/sg246268.html
Sung Y. Lee
"ADSM: Dist Stor Manager" wrote on 12/01/2005
03:30:18 PM:
> Hi again
>
> TSM versoin 5.2.6 on a WIN2K server
>
> Maybe I dont ha
You might have a restartable restore session sitting out there
issue q restore and see if there is a restartabel restore sessing
(The session number will be negative)
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of
Kelly Martin
Sent: Thursday, December
"ADSM: Dist Stor Manager" wrote on 12/01/2005
03:07:38 PM:
> I'm attempting to run a MOVE NODEDATA to coalesce a node's data onto
> as few tapes as possible. However, the command fails:
> 12/01/2005 15:04:49 ANR1171W Unable to move files associated with node
> WASHINGTON, f
I bet there's a restartable restore hanging out - do a "q restore" to see
if there is one, and cancel it if there is one.
Nick Cassimatis
- Forwarded by Nicholas Cassimatis/Raleigh/IBM on 12/01/2005 04:13 PM
-
"ADSM: Dist Stor Manager" wrote on 12/01/2005
04:07:38 PM:
> I'm attempting
I'm attempting to run a MOVE NODEDATA to coalesce a node's data onto
as few tapes as possible. However, the command fails:
12/01/2005 15:04:49 ANR1171W Unable to move files associated with node
WASHINGTON, filespace \\washington\d$ fsId 3 on volume
A000
This error is returned by the Notes C API when DP for Domino opens the
database.
Take a look at the technote below and the other technotes reference by it
for a list
of reasons why this error occurs.
Ref # 1088323
Error Accessing Local Database: "This database has access"
http://www-1.ibm.com/
Hi again
TSM versoin 5.2.6 on a WIN2K server
Maybe I dont have the right way to configure my 3584 library in TSM
What should be the basic steps to configure the 3584 in TSM (I have 5 LTO3
fiber drive)
thanks
Luc
"Barnes, Kenny" <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager"
2005-
Thanks to all the suggestions on resolving this issue.
It turned out to be a corrupt download from the IBM FTP site. I
redownloaded it and it now installs completely.
However, I still haven't figured out how we could have unzipped and
untarred a "corrupt" file without errors.
Now comes the next
You can get this on the lcd panel, I would guess under service -> library vpd
Haven't gone upstairs, we have configured the web interface and the above is
location in the http gui ...
Does that help?
Aaron
Aaron Durkee
Infrastructure Analyst
Networking and Technical Group
Catholic Health Syste
Shouldn't have to define serial number. This is picked automatically after you
define a path to one or more of control paths in a fabric environment (if
used). For UNIX control paths are defined as "2smc" along with 2st for example.
(Solaris) DEFINE LIBRARY 3584LIB1 LIBTYPE=SCSI SHARED=YES Ser
Hi ..
I cant selectserial=autodetect ...
When U go in AUTOMATED LIBRARY / define automated library ... it aks U
for a library name and serial !!!
Luc
"Bos, Karel" <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager"
2005-12-01 12:34 PM
Please respond to "ADSM: Dist Stor Manager"
To go along with the activity log info Andy has given, if you watch the
mount activity messages in the log when the restore is kicked off it should
give you a clue as to what tape it is on too. Especially if nothing else if
going on that will force you to sift through other mount messages.
Thanks,
I'm trying to help the Domino folks clear the errors so their Domino DB
backups will complete successfully. We're seeing this error on a couple of
computers, and the administrator may have a clue but I'm trying to see if
anyone out there knows how to address this in case he doesn't.
11/30/05 19:
Thanks again Richard!
There may have been a options change I will check.
Tim
Richard Sims wrote:
> Tim - Do 'dsmc q opt' to verify your client options...
>
> CAD's mission is to fire up the dsmc schedule process, where a
> failure of dsmc is most commonly due to a bad options change. If not
>
Laura
You say that LAN free is not an option, therefore you are restoring over
your IP network.
Firstly, can you confirm that you have a GB NIC in your TSM server and
GB NIC in your target restore SQL server.
My maths is not the best but with basic rough calculations at 100M
bits/sec, you get ap
>We have been evaluating this product and have not been able to achieve
the
>necessary performance throughput on the restores we require. I'd like to
>know if anyone else out there is successfully using this product.
>Environment:
>AIX 5.2 and TSM Server 5.2.4.2
>6 STK 9840 B tape drives, but w
select VOLUME_NAME from contents where NODE_NAME='NODE' and
FILESPACE_NAME='\\teste\c$' and FILE_NAME='\\\file'
On 12/1/05, Joni Moyer <[EMAIL PROTECTED]> wrote:
> Hello Everyone,
>
> I am trying to pinpoint why the restore of the file below couldn't be
> accomplished on the onsite tape,
You can look at the CONTENTS table to find the tapes on which all versions
reside. That will help narrow things for you.
Having said that, I have to ask: why is it important to know the tape that
the file on?
The reason I ask is that all we know from what you've told us is that a
file was not res
Serial=autodetect?
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Luc
Beaudoin
Sent: donderdag 1 december 2005 17:51
To: ADSM-L@VM.MARIST.EDU
Subject: Install 3584 library
I received my new library 3584
I have to configure it in TSM
The litt
Hello Everyone,
I am trying to pinpoint why the restore of the file below couldn't be
accomplished on the onsite tape, but I'm not quite sure how to find out
what tape it's on. Any suggestions? Thanks!
NODE_NAME FILESPACE_NAME HL_NAME LL_NAME
-- ---
Have you tried accessing it via IP/DNS? If you give it a name/address, there is
much info to be found with the built-in Java interface. The VPD is accessible
there.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Luc
Beaudoin
Sent: Thursday, Decem
We have been evaluating this product and have not been able to achieve the
necessary performance throughput on the restores we require. I'd like to
know if anyone else out there is successfully using this product.
Environment:
AIX 5.2 and TSM Server 5.2.4.2
6 STK 9840 B tape drives, but we alw
Hello Luc
Here is one method:
Set up the ethernet interface on the library, requires network parms to be
entered on the front panel, and set up the web interface on the fron panel.
Then you can point a browser to the library, from there go to Service then Node
Card VPD.
That will have the se
Many thanks Richard
I have opened a PMR with IBM anyway and sent them the requested Error,
Trace logs etc. But I will also do as you recommend and perform some of my
own diagnostic backups to see if that helps light my way.
All the best
Farren Minns
Solaris System Admin / Oracle DBA
IT - Hosting
I received my new library 3584
I have to configure it in TSM
The little problem I have is that I am not able to find the serial number
of the Library ...
any quick idea ??
thanks
Luc Beaudoin
Administrateur Réseau / Network Administrator
Hopital General Juif S.M.B.D.
Tel: (514) 340-8222
On Dec 1, 2005, at 6:47 AM, Farren Minns wrote:
...I have never seen such problems with any other clients flavours
and I
really don't know where to start looking. ...
Farren - I have some familiarity with the Mac client, but was hoping
that
a regular user of it would have insights and
Tim - Do 'dsmc q opt' to verify your client options...
CAD's mission is to fire up the dsmc schedule process, where a
failure of dsmc is most commonly due to a bad options change. If not
that, then look for a prevailing dsmc schedule process, perhaps
lingering from a prior schedule.
Richard
Hello,
Has anyone ever had trouble staring TSM services on a windows
client and received the following message in the dsmwebcl.log
and Dsmerror.log shows the following.
ANS1977E Dsmcad schedule invocation was unsuccessful - will try
again in 10 minutes.
The next backup start time/date schedule n
Luc,
Maybe be the Windows XP firewall is blocking the connection? You might try
turning off the built-in firewall or using another system to download the
firmware from instead of your laptop. Also, I noticed that the manual
states RSHD is for UNIX systems. Maybe this is your problem?
Thanks,
I don't know how to explain the causes, but a reset on the drive
worked for me.. :)
On 11/30/05, Gerald <[EMAIL PROTECTED]> wrote:
> Bingo!
>
> I thought i'd checked all the ends but when I went to remove the short
> cable daisy-chaining the one good drive to the one bad drive, I found
> a bent pi
Hi all
Well, it looks like we were having quite a few problems with version
5.1.5.16 of the Mac OSX client, but since going to 5.2.3.12 we have had
even more. So, while I'm waiting to see if IBM can help me, I will probably
have to end up going back to the previous version of the client.
Now, I k
Hi Arnaud
I can connect to the switch with hyper terminal ...
I put my userame Admin and password ...
here's the steps
- run the RSHD.EXE deamon
- firmwaredownload
- IP or host I type the IP of my laptop
- username admin
-filename c:/2109/v3.2.0a
-RSHD o
Luc,
What exactly is your problem : no connection to the switch with hyper terminal,
or something else ?
Cheers.
Arnaud
**
Panalpina Management Ltd., Basle, Switzerland,
CIT Department Viadukstrasse 42, P.O. Box 4002
Hi all
it's not a TSM question ... but if someone knows how to do that ,,
I have a problem with one of my 2109-F16 SAN switch ... I have to upgrade
the firmware to version v3.2.0a by the serial port
How can I do that ... I read the documentation ... but doesn't work ...
I'm connecting my WI
"ADSM: Dist Stor Manager" wrote on 11/30/2005
04:22:18 PM:
> Bingo!
>
> I thought i'd checked all the ends but when I went to remove the short
> cable daisy-chaining the one good drive to the one bad drive, I found
> a bent pin on the end of the cable I had not previously checked. I was
> removing
On Dec 1, 2005, at 7:36 AM, Rainer Holzinger wrote:
Thank you Richard,
I have been there a few minutes ago and saw that I need Data
Protection
for Oracle V5.2.4 on Linux for AMD64 or EM64T (also known as x86_64).
But from where can I download the code and the product manual?
Linux may be "fr
Thank you Richard,
I have been there a few minutes ago and saw that I need Data Protection
for Oracle V5.2.4 on Linux for AMD64 or EM64T (also known as x86_64).
But from where can I download the code and the product manual?
Thank you,
Rainer
> -Original Message-
> From: ADSM: Dist Stor
On Dec 1, 2005, at 3:20 AM, Rainer Holzinger wrote:
does someone know if there's a TDP for Oracle on Linux available,
supporting Oracle 10g in 64 bit addressing mode?
If so from where can I download it?
See the TSM Products page:
http://www.ibm.com/software/tivoli/products/storage-mgr/product
Hi all
Right, I know I have been here before but we are still having some baaad
problems with our Mac OSX 5.2.3.12 clients.
I'm currently still only running TSM Server 5.1.6.2 on Solaris until the
hardware arrives for the upgrade (v soon), but as far as I am concerned,
there should be no problem
Hello all,
does someone know if there's a TDP for Oracle on Linux available,
supporting Oracle 10g in 64 bit addressing mode?
If so from where can I download it?
Thank you, Rainer
46 matches
Mail list logo
