Ans1872E error on Novell 6.5 - Solved !!!!!

Problem solved ………. I install a new TSM client version 5.2.0.3 and the problem disappeared !! Regards Robert Hi to All I have a Netware Novell version 6.5 and when running query tsa on this client got this error message : ANS1872E Unable to connect to Netware target service 'NW'

Ans1872E error on Novell 6.5

Hi to All I have a Netware Novell version 6.5 and when running query tsa on this client got this error message : ANS1872E Unable to connect to Netware target service 'NW' Make sure the TSA nls is loaded on this specified machine I of course loaded before the TSA600.nlm and the SMDR.nlm (lo

Re: Slow backup from Netware of small files

Hi Eric, You will not get better performance than that - although, like Richard says, it is common on all platforms it is worse on Netware. You should definately switch off compression if you had it on - the reason you are getting worse performance(this is my opinion anyhow), is because Netware us

Hi Experts.

Hi, We are recently implemented the TSM backup for our all AIX server. I need to include 2 file systems in one archive. for example i am using the following command in my scripts. dsmc arch -subdir=yes -archmc=retain8d_mc "/t01/*" I have one more file system called /t02, i want to add this

Re: DRM Procedures

Dave, The maxprocess idea is a good one and will help, but yes, you will send more tapes offsite. As an alternative, could you run the backup stg process more often, say two or three times over the night? Then the last part of the copy will only take a small amount of time and your window is r

Anyone Have W2K TSM 5.1.8 (or others) FC attached to 3590[E11]?

Looking to find out if anyone has a Windows TSM server fiber channel attached to a 3590-E11[x] tape drive/autoloader. Does TSM support this device using the TSM device driver? Anyone share experiences or advice? TIA -- Dwight McCann Computer and Network Technologist, UCSB Info Systems & Computing

Re: SV: Slow backup from Netware of small files

We have usually set the following to get more performance on our NetWare clients. 1.1. Max Directory Cache Buffers 6,000 1.2. Min Directory Cache Buffers 2,000 1.3. Max Packet Receive Buffers 10,000 1.4. Min Packet Receive Buffers 2,000 1.5. Maximum concurrent disk writes 7

Re: Using subfile backup for specific filetypes ?

The following might also be interesting. ProblemWhen using adaptive subfile backup, at what percentage change in comparison to the base file does the IBM Tivoli Storage Manager Backup-Archive client resend the entire base file instead of continuing to create delta files? SolutionAdaptive subfil

Re: AW: AW: bad performance on web administration tool under ITSM V5.2.2.3

Could someone at TSM let us know if this is a forward or a reverse lookup issue. We had the problem and it was fixed with the DNSLOOKUP NO setting. We too wanted to solve the problem without using the option. We couldn't find any issues with DNS. All our clients are set in DNS with dynamic DNS

Re: Using subfile backup for specific filetypes ?

TSm compares each filename on the drive to the dsm.opt file, going from the BOTTOM UP. As soon as it finds a match, it takes action accordingly for that file and does no further checking. So, I believe your syntax is correct. It will - backup up only files in the MyFolder directory and its subdir

Re: Include/exclude in linux

>Hi, Richard: > >I use > >exclude.dir /home > >but the include didn't work > >I don't know why? You sure are resisting that Unix Backup-Archive Clients manual... ;-) About this, it says: "Use exclude.fs and exclude.dir statements to exclude file spaces and all files and sub-directories in the

Re: Include/exclude in linux

Hi, Richard: I use exclude.dir /home include /home/andy/.../* but the include didn't work I don't know why? thanks Andy Richard Sims <[EMAIL PROTECTED]> wrote: >Do you have the example? "Table 17. Using wildcard characters with include and exclude patterns" in the Unix B/A Client manu

Re: Antwort: Re: AIX - backup SAP DB2

Hi, I am not sure whether this will help, but if you are able to run the script via crontab but not via TSM Scheduler, then try putting this in the scheduler objects field: "your full path"/backupon.sh > "your log file" 2>&1 < /dev/null Basically you have to redirect the STDIN to /dev/null. Ho

Re: Locating files stored on tape_pools

From: ADSM: Dist Stor Manager on behalf of Barnes, Kenny I currently had errors during reclaim for off-site copypool volumes asking for files that cannot be found in on-site tape_pool volumes. While searching for volumes with status of unavailable or destroyed, I was able to find the volume. This

Re: bad performance on web administration tool under ITSM V5.2.2.3

>I included DNSLOOKUP NO in my dsmserv.opt file an the performance >problem is solved. But... As the APARs indicate, it is typically the case that TSM helped identify a site configuration/service problem, which needs to be pursued, as it can affect all applications running on that system. DNS loo

Locating files stored on tape_pools

I currently had errors during reclaim for off-site copypool volumes asking for files that cannot be found in on-site tape_pool volumes. While searching for volumes with status of unavailable or destroyed, I was able to find the volume. This posed the question of, "if I had not found tapes off-line

Re: Lost password for TDP for MSSQL

Thanks Del, The machine admin didn't follow up late Friday afternoon, but yesterday morning he reported an oops in reading the manual. All fixed. At 03:37 PM 4/23/2004 -0400, you wrote: Fred, If you have reset the password, you will need to store it again. You can do this by running a command like

AW: AW: bad performance on web administration tool under ITSM V5.2.2.3

Thanks Dave, I included DNSLOOKUP NO in my dsmserv.opt file an the performance problem is solved. Ronald -Ursprüngliche Nachricht- Von: Dave Canan [mailto:[EMAIL PROTECTED] Gesendet: Samstag, 24. April 2004 19:00 An: [EMAIL PROTECTED] Betreff: Re: AW: bad performance on web administra

AW: Internal Memory Managment TSM @MVS

Matt, since Freeheld bytes "touches" MaxQuickFree bytes I would say you should increase that size Kind regards, Stefan Holzwarth > > I was under the impression that if FREEHELD BYTES = > MAXQUICKFREE BYTES things were O.K. I currently have mine > set to 40MB. Are you saying I am still low?

Antwort: Re: AIX - backup SAP DB2

Hey Tomas, i use the root - crontab to start the DB2-Backup on AIX. It works fine. mfg Sabine Rettenberger Wolf GmbH | \ _ , , , - - - , , _ Abt. Z-IR ZZZzz / , ` . - ' ` '- . ; - ; ; , _ Industriestraße 1| , 4 - ) ) - ,

Re: AIX Node Down

Since when do you need a license for Linux? Just install Fedora Core 1 on a PC (http://fedora.redhat.com) , install the Linux TSM client, and then restore the files you need. sujay dinakar wrote: Thanks for all Yes we are using JFS File system on AIX box, and we dont have any license for Linux als

2K3 backup issues

Anyone seen these kind of error messages and/or suggest what to do about them ? This is on a 2K3 server going to an AIX TSM 5.2.1.3 server. The client is at the latest, 5.2.2.9 ! 04/25/2004 20:33:40 sessRecvVerb(): Invalid verb received. 04/25/2004 20:33:40 sessRecvVerb(): Invalid verb received

DRM Procedures

For our DRM procedures we have a script that runs nightly that does a backup of all the primary storage pool to our copy pool. Currently on a daily basis we are taking 1 tape of data and 1 database tape off site. I would like to reduce the windows which it takes the copy pool to be created. I bel

Re: Internal Memory Managment TSM @MVS

I can concur on this. I also called IBM TSM on zOS support, back a while ago, about performance issues. He told me the default "maxquick" value is 4% of allocated/available REGION. For us, we bumped it to 20M. He also said there is a usermod that will "zap" TSM to make it default to 10% (or s

Re: 3584/lto2 code

I would also encourage folks to get 8.4.6.0 of Atape. The first entry in the "readme" says it all: 8.4.6.0 Fix excessice retry when configuring smc device for long boot problem Add mtlib utility for 3494 and SCSI Medium Changer Libraries We were seeing 30-minute boot times until we i

Re: Slow backup from Netware of small files

... >Whilst backup performance of large files is very good (approx 16 MB/s) the >backup performance of small files (50 KB to 300KB) is extremely poor (300 >KB/s). ... The backup of small files is an age-old problem in general, regardless of operating system: you'll find discussions of it in the Li

Re: Internal Memory Managment TSM @MVS

I was under the impression that if FREEHELD BYTES = MAXQUICKFREE BYTES things were O.K. I currently have mine set to 40MB. Are you saying I am still low? Matt MAX initial storage 536870912 (512.0 MB) Freeheld bytes 40959642 (39.1 MB) MaxQuickFree bytes 4096 (39.1 MB) 44 Pag

SV: Slow backup from Netware of small files

Hi Eric Your settings seems ok - I have a couple of questions to you: Do you have compression enabled on the files in question? Do you run antivirus on this server? if yes, which product? Do you know config.nlm from Novell? If so you could use it, and I would be happy to go through the config.t

Slow backup from Netware of small files

Dear All, ENVIRONMENT == TSM Server 5.2 on AIX 5.1 TXNGROUPMAX 256 TCPWINDOWSIZE 64 TSM Backup/Archive Client 5.2 on Netware 5 TSANDS.NLM ver 10110.95 TSA500.NLM ver 5.05d SMDR.NLM ver 6.50c TCPWINDOWSIZE 64 TCPBUFSIZE

Antwort: Re: AIX Node Down

Hi, just an info, we successfully restored VxFS on Solaris to UFS, I didn't think that would work , it even worked with Oracle DB's Best Regards Markus Veit An: [EMAIL PROTECTED] Kopie:

Re: 3584/lto2 code

On Mon, Apr 26, 2004 at 10:59:17PM +0200, Stef Coene wrote: > > It is a shame if IBM is no longer providing this microcode to the > > customer. If they are, then it is also a shame that the FTP site is so > > out-of-date. > Then use the website. Why don't you visit the homepage of your library:

Internal Memory Managment TSM @MVS

Hi, 3 month ago i read about PMR92547, that describes performance-problems coming from a too small internal memorypool Since we had speedproblems we doubled that pool size and after 3 month i believe it was a good step forward. With show memu you can have a look at the current settings (should be